Two machines connected via LAN Older machine is running RedHat 3 Kernel 2.4.21-50.ELsmp on i686 Newer machine is at a current level of SUSE Linux. Newer machine has a DVD drive. Here's the question. Is it possible to, remotely, mount the DVD device to the older machine? If so, can it be used to install software packages?
View 1 Replies
I have a network of 20 machines, all running Ubuntu 10.04.
Each machine has about 200[GB] of data that I'd like to share with all other 19 machines for READ ONLY PURPOSES. The reading should be done at the FASTEST POSSIBLE WAY.
A friend told me to look into setting up HTTP / FTP. Is it indeed the optimal way to share data between the machines (better than NFS)? if so, how do I go about it?
UPDATE: Just to clarify, all I want is to be able (from within machine X) to access one of machine Ys files and LOAD IT INTO MEMORY. all of the files are of uniform size (500 [KB]). Which method is fastest (SAMBA / NFS / HTTP / FTP)?
Is it possible to copy a file on multiple remote machines through scp in one command?
View 3 Replies View RelatedIm new to the forum and fairly new to Linux as well. my apologies if this is posted in the wrong section. My problem is How can you search for a file in multiple machines (like a server farm) ? For example i log onto machine num1 and want to search for a file named "xxx.yyy" which may be in one of 4 machnies. What i do right now is manually log into each machine and run the find command. However i have heard that it is possible to do it via a couple of simple commands. I have looked into pssh and cssh as well as ssh tunneling (along with public key authentication to stop the machines requesting a password every time i log in) and unfortunately i was unable to find an answer.
View 4 Replies View Relatedi have 30 linux PCs running. i need to check the performance of all pcs( memory,ram and process usage) in single command or in GUI mode.In solaris we have perf script to check performance in GUI mode. i need same type in linux?
View 1 Replies View Relatedi have ubuntu 10.10 on my laptop and in my desktop 10.4 how can i share the folder on my desktop so i can be able to pull them from my laptop.
View 4 Replies View RelatedTwo machines, each running Ubuntu 10.10. Desktop is wired to the router, and laptop is wireless. Printer is an HP Photosmart C4400 All in One series, and is connected to the desktop via USB.Prints OK from desktop. I have CUPS set up on both machines, and the laptop can see the printer. Desktop firewall allows CUPS in on port 631. Printer properties are set to enabled and shared Desktop is set to publish printers, and laptop is set to show printers from other systems. Fine until I try to print from laptop, when print job is shown as sent, but printer remains idle. Another thing is that on the laptop, the "enabled" setting drops off. I think this must be a configuration issue, but cannot find an answer anywhere. File sharing using Nautilus works fine.
View 4 Replies View RelatedI created two Linux virtual machines. I created a same directory in both of them as following . /ocfs/clusterware I need to make this directory shared between them I mean , if create file in the directory in the first VM , I must see it from the second VM.
View 4 Replies View RelatedI have a machine running fedora 10 that has a printer in cups that i want to share to the windows machines on the network.I cant find any mention of shareing printers in the cups interface
View 1 Replies View RelatedI have 3 home computers. Two of them are dual boot Windows and Ubuntu. The third runs only Ubuntu. I want to share files and two printers among the three machines. What is the best approach to doing this.
View 4 Replies View RelatedI just installed ubuntu 10.04 x64. I have installed it and set it up the way I like on my server, however I now have 3 terminals and a laptop to set it up on the exact same way. As a result Id like some advice on what can and cant be done and how. Preferably I am looking to use programs with GUIs. Thing the style of ubuntu one, software manager etc, not really too into the command line, or conf editing unless there is no other option.
1. I installed all the software from software centre I like. Now I need the same software on the other computers. I know mint has mintbackup where it just exports and imports a list if installed software. I am looking for an ubuntu equivalent.
2. Firefox and Thunderbird add-ons. I install like 20 firefox and thunderbird add ons. sometimes I can't even keep track of them. There must be a way to sync them so that each computer I install ubuntu on I can simply import the list of mozilla add ons and have it auto download them.
3. Mail Contacts and Calender Syncing. I need to sync between my 3 ubuntu machines and my windows mobile 6.5 device for calender, email/phone/name contact lists. Email is taken care of by imap, but lightnings calender isnt and neither are the contacts. If I input a contact on my phone I want it to sync to the other computers I use.
4. Ubuntu one. I have /storage/workfolder in my root directory on my personal server. I want to be able to work on documents at work on my laptop and sync them so that when I get home, they are synced on the server without causing overwrite changes etc.
5. Desktop settings, icon themes, preferences from ubuntu tweak etc. I know this one is a bit more of a long shot, but it takes 20 minutes each computer, to set up the little maximize minimize buttons on the other side, set up cairo dock the way I like, install the icon theme and backgrounds I like. isnt there a way to back this up so it doesnt have to be done each time or so I can make my other computers the same?
I'm running kernel release 2.6.26-2-686 on a i686 and are trying to share files between my machine and some Windows 95/98 machines. When I enter smb://ip_number/share_name in Nautilus, it works. I can browse the files. When I try the same with smbclient or smbmount, it complains.
smbclient -I=ip_number -L=//server/share gives cli_rpc_pipe_open: cli_nt_create failed on pipe srvsvc to machine tf_calibration. Error was ERRSRV - ERRerror (Non-specific error code.)
I just set up an ubuntu 9.10 server (no desktop environment, command line only) and I'm unable to see my samba share. I followed these instructions. Here are the relevant parts of my smb.conf file: Quote:
workgroup = JASONGROUP
# I un-commented this
security = user
[code]....
i was getting impatient in finding a way to make some of my peripherial devices to work in linux but no luck, so i installed windows xp home in virtual box, gave it access to my usb devices and installed the drivers for the printers and scanner. but there is just one thing that i want to do now how do i get windows xp to share my printer in virtual box with other computers in the house
View 5 Replies View Relatedutility to let me automatically apply shell commands I type to a list of given remote machines? I'm configuring and maintaining multiple servers all running Fedora 12 and I want them to have exactly the same configuration. I also need to check out code from subversion onto these machines; the same code from the same location into the same directory. I know I could use ssh to run each command individually for each machine, but is there a tool that will make this much easier?
View 3 Replies View Relatedrun a cron job to download my email logs to my laptop. But the question is HOW? Im not sure how to write the php script for the cron job. the file is on "computer A" and the file is setup to chmod I just need to know how to write the php to "access" the other computer and then download the file to a certain file on my laptop.
View 3 Replies View RelatedI am using mount.cifs to mount a remote samba share (both client and server are Ubuntu server 8.04) like this:mount.cifs //sambaserver/samba /mountpath -o credentials=/path/.credentials,uid=someuser,gid=1000.I mounted a user from local system with username and password with mount.cifs but the problem is that the user is part of multiple groups on the remote system and with mount.cifs I can only specify one gid. Is there a way to specify all the gids that the remote user has?
Mount the remote samba with multiple groups on the local system?Browse the mount from 1) with the terminal since I want to pass some files from samba as arguments to local programs.which runs through gvfs; but the newer gnome does not write to disk the ~/.gvfs anymore so I can't browse it in terminal. And the last solution would be NFS but that means that I have to synchronize the uids and gids on the local system with the ones from the server.
i manged to get a samba server up and running to share with my windows machines. But i still want more. My main goal is to be able to share my movies. I have a laptop hooked to my flat screen with 3TB's of external drives, thats whats acting as my server. I have ubuntu desktop installed because i use it to play movies also.
I'm looking to set up something that is a little faster than samba (yes i no trying to share through USB 2.0 external drives and a wifi connection isn't going to be real fast no matter what) but i want to be able to access my server remotely. like maybe FTP? but what i'm asking here is what protocol should i use and what programs? i was thinking gadmin-proftpd and then filezilla to access?
I'm having some trouble mounting a Samba share on my two Ubuntu machines. The Samba share is setup so that all files are readable and writable by everyone (it's only accessible via the local network). When I create a new folder on the share with either of my Ubuntu machines, the folder becomes non-writable by anyone ie. I can't place anything into the folder. I'm using the following command to mount the share:
[Code].....
I think the problem is with the way I'm mounting the share on my Ubuntu machines. If I go to the share using smb://192.168.1.160 in a file browser, I can create new folders which are readable and writable by everyone. But, if I create the new folder where it's mounted at /mnt/backup, no-one can modify or change it.
recommend a utility to let me automatically apply shell commands I type to a list of given remote machines?I'm configuring and maintaining multiple servers all running Fedora 12 and I want them to have exactly the same configuration. I also need to check out code from subversion onto these machines; the same code from the same location into the same directory. I know I could use ssh to run each command individually for each machine, but is there a tool that will make this much easier?
View 6 Replies View RelatedI have a home network with 6+ x86_64 machines, all with similar setups. In the past (FC10 and before), I've had common package repositories (e.g /var/cache/yum/fedora/packages) shared via NFS with all the machines (and with keepcache=1 in /etc/yum.conf). That way, a given RPM only got downloaded once; the other machines would then pull it from my local package repository. And I don't mind the disk usage of keeping one copy of all my old RPMS around.
It seems that while DRPMS is great for a single machine, it doesn't make sense in my case. If I have to download the DRPM 6 times (and take the time/CPU hit to recreate the RPM 6 times), I might as well have downloaded the RPM once and been done with it. Is there a not-too-convoluted method to keep a common package repository across multiple machines even with DRPMS? Or, better, to have that first downloading machine pull a DRPM, generate the RPM, then save the RPM in the local shared repository?
I'm trying to write a script that will prompt the user for a username/password, then create that user/password in the right groups on all my machines. I know this is kind of a long way around to avoid a NIS server, but I like making my life more difficult.
This is what I have so far:
Code:
the script has 2 problems: The "if" functions return an error and do not compare the strings successfully. whatever password is entered does get applied properly and the user is unable to login
I am trying to get preseed working on a bunch of machines with multiple NICs but it doesn't pick the right interface and/or gets "no link" on all interfaces. My PXE kernel line looks like so (I have auto=true priority=critical and interface=auto)
label squeeze
kernel debian-installer/squeeze/i386/linux
append vga=788 initrd=debian-installer/squeeze/i386/initrd.gz auto=true priority=critical ramdisk_size=10800 root=/dev/rd/0 rw url=example.com/d-i/squeeze/preseed.cfg interface=auto netcfg/dhcp_timeout=60
[Code]...
Am using 10.04 and quite happy with the way it is working. my nephew and my mother have also switched to ubuntu.
To save on internet usage and load on the ubuntu servers, can i download upgrade files in one computer and then upgrade all systems?
I have three Ubuntu desktops that I would like to upgrade from 9.10 to 10.04. Is there a way to avoid having each PC download the same packages? Is there some magic I can do with two of the PCs to maybe point the software source list at the third 'master' PC that does all the downloading?
View 2 Replies View Relatedok I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times.
My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
I am using Debian 4 bigmem and I set up static ip for my box. This is for a class and we will be moving the hard drives around the lab to different computers. My question is what do I configure to get Debian to be ok with my using different nics at different times. My first time I used it, I had eth0, but now I'm on a different computer (same type of hardware on all systems) but my nic is now eth1... And I had to set up static again for that nic. How can I have it just maintain a static ip for whatever nic/mac address on the computer that my hard drive happens to be put on?
View 5 Replies View RelatedI'm looking for alternative to Adobe Acrobat Reader, a slim free PDF Reader with browser plugin, for example for Iceweasel.
View 6 Replies View RelatedI have openSUSE 11.2, 64 bits. I use Evince from the very beginning. Since a few weeks, when I want to open a .pdf file, Acrobat Reader appears and reads my file. It seems to have become the default reader now. However, I never wanted to change from Evince :this simple program is well enough for me. I tried various ways, but I can't define Evince as my default .pdf reader. How can I make Evince to become my default reader again please ?
View 9 Replies View RelatedI use Samba, NFS, RSync and FTP/TFTP in my multi-location setup.
Is there a CentOS standard place to put my sharable file space? I've seen /usr/local/, /var, /var/samba, /user and /share. I have gotten to the point of preferring /share, but I want my servers to adhere to standards in case I am not available. Another alternative is to create a user name that matches the group name and using that user's home directory for the shared file space. This would solve the issue of shared departmental mailboxes and backups, not to mention (though apparently, I'm going to) SELinux configuration... Maybe I've just answered my own question...
What are other people's opinions?
