General :: See All Of Network Configurations?
Jul 21, 2010how do I see all of my network configurations like computer name and what network am I in? how do I see other pc's within my same network?
View 1 Replieshow do I see all of my network configurations like computer name and what network am I in? how do I see other pc's within my same network?
View 1 RepliesI have installed RHEL 5 in my pc with following configuration:
RAM-2GB
Processor : Intel,Dual Core
Motherboard : Asus-MX
The problem is when I configure the network setting i.e.,Ip address, Subnet mask and default gateway, the pc becomes very slow. For opening the terminal it takes 20-25 seconds.
I've spent two days trying to get this to work to no avail.here is the output of a recommended diagnosis script to start.[URL]
short version is ...
!!! CND0120E: Network card ra0 has no IP address
!!! CND0490E: No access point with your SSID detected on interface ra0
[code]....
how can i install pfsense to red hat 5 i have tried and it asked to install other files(dependencies).i searched about it & i find that it can be done thrugh yum installer easily. how can i do that.
View 3 Replies View Relatedwhat is the file and path name of the configuration file to which you would add to the AllowUsers charlie linus lucy?
View 3 Replies View RelatedHow do i upload files using apache configurations. ho do i do that. i am using centos.
because my client wants upload files through httpd.
I have been give a task of replicating one of our production systems to create a test system. I have been restricted to use c shell to set up its environment variables. I am new to this my questions is how do i set environment variables for a particular user on c shell e.g ORACLE_HOME and ORACLE_SID permanently for a particualar user i know in bash you edit the .bash_profile file. What do i do for c shell?
View 2 Replies View Relatedwhere are the interface configurations (set by ifconfig, not the static ones) stored? I'm asking because I'm trying to understand, more broadly, the order of IP address lookup. If I ping the local machine (localhost, or one of the interfaces) no messages get sent out (at least according to wireshark), so some local lookup must be taking place.
View 1 Replies View RelatedI am having a problem with new windows opening and becoming the focus right away. So when I am typing in one window, the other window opens up and now all of my text is going into the new window.....very very frustrating. I am able to change this on an older version of Fedora that I use at work, but I can not for the life of me find how to fix this on Fedora 11.
View 4 Replies View RelatedI did a lot of tweaks (configurations, apps installed..etc) to Lucid and I want to save those tweaks so when I reinstall Lucid again I get them all.
View 1 Replies View RelatedWhen i install Ubuntu, it's starting programs, and all of it's defaults is great, but I do a lot of configuring to get it the way I wants there a way to save all the configurations, settings, and all the updates.
View 2 Replies View Relatedconfigurations steps of RHEL 5.0 Secondary DNS ...
View 1 Replies View RelatedI dont know much about linux, some basic console commands nuthing much, but I was setting up slackware for my server. The hardware was a bit old, so after making a new user and logging in, I tried my best to go into the theme settings, and change the current theme. Immedietly after hitting apply, It went back to console, and now startx tries to start xserver but crashes it. Is there a way I can reset the config? Possibly with the install cd?
View 4 Replies View RelatedSimple (I hope) problem here, my xdvi configuration is wacky. It never shows the entire page, cuts off the left side of text. This happened after having to shut the program down a few times due to it hating me.
In any case, the root configuration file works perfectly, so I was wondering if someone knew how to
a) reset user configuration for xdvi to defaults, or
b) copy root configuration over to user.
I recently bought an ASUS M32AD PC to upgrade from my eMachines T2893.The ASUS came pre-loaded with W-8.1 on a 1 TB HD. Whoop.I want to install the Master HD with deb7 from the eMach into the new unit, but there seems to be a problem. The drives have different connection configurations. Total surprise to me.
Maxtor DiamondMax Plus 9 EIDE 160GB ATA-133
Toshiba SATA 6.0 Gb/s 1.0 TB
DT01ACA100
I just got installed ubuntu karmic koala 9.10 on my laptop and fiddle too much with the system configuration files. Now I notice that most of my permissions are not working in my login. How do I restore my Ubuntu setting, which are as good as freshly installed OS and also Not disturb any of my currently installed application on the system ??Note: I repeat "I really dont want to disturb my of my currently installed applications on my ubuntu and yet want to restore my system to freshly installed OS settings. All the applications that I have installed is a whopping 3 days of googling and hardwork in getting them working "Some of the freaky things happening in my system:
1. I am not able to see Battery notification and Network notification y workaround: execute "sudo /usr/bin/gnome-power-management" and "sudo /usr/bin/nm-applet". I am not able to lock my screen3. I am not able to access my windows drive. Which otherwise when worked normally used to prompt me to enter my password, post authentication I was able to access my drive
I had a successful dual boot with win 7 and ubuntu 10.04. I just moved computers from a dell XPS with a P4 to a Xeon. I switched the hard drives between the machines. As I expected GRUB somehow imploded on the idea and now only displays a cruel "No such disk" message. Anyways, I was hoping to tap into someones vast knowledge of grub and re-configure it. It would make my day. I am also using a LiveCD so any commands I would use must be able to work on a LiveCD
fdisk -l
Code:
Disk /dev/sda: 203.9 GB, 203928109056 bytes
255 heads, 63 sectors/track, 24792 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xdf29521d
Device Boot Start End Blocks Id System
/dev/sda1 1 23781 191020851 83 Linux
/dev/sda2 23782 24792 8120857+ 5 Extended
/dev/sda5 23782 24792 8120826 82 Linux swap / Solaris
Disk /dev/sdc: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000f0422
Device Boot Start End Blocks Id System
Disk /dev/sdb: 300.1 GB, 300090728448 bytes
255 heads, 63 sectors/track, 36483 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xe3b8e3b8
Device Boot Start End Blocks Id System
/dev/sdb1 1 3863 31029516 7 HPFS/NTFS
/dev/sdb2 3864 36483 262020150 f W95 Ext'd (LBA)
/dev/sdb5 3864 36483 262020118+ 7 HPFS/NTFS
sudo update-grub
Code:
/usr/sbin/grub-probe: error: cannot find a device for / (is /dev mounted?).
I've reinsalled ubuntu 10.04 no less than 5 times, each time taking hours to get all my configuration right, basically I like to mess to the point of screwing it up. Anyway just wondering if there was a way or program that remembers all of your preferences, files, games, apps, EVERYTHING! so you only have to load the file and it will do everything for you. Would save lot of time!
View 5 Replies View RelatedWhat happens if I restart GDM? And how do I do it? I think I did it once and I lost all my configurations, or maybe that was something else. i just dont want to have to redo all my customizations.
View 4 Replies View RelatedHow may I configure my emacs so it will look like example codes on this site.This configuration is better for my eyes.
View 1 Replies View RelatedI am using Squirrelmail version 1.4.9a.When I run conf.pl to enable or disable plugins, changes don't reflect into config.php file. Because of that, I have to manually change config.php.
View 1 Replies View RelatedTo some doc's or how-to's that will show me the best recommended settings for optimum performance for both apache and php configurations?
View 1 Replies View Relatedi dont have much of command line experience with linux.can i setup opensuse server in such a way that i do all my configurations in gui mode and then switch the server to no gui mode as to free up resources.
View 9 Replies View RelatedAny step by step guide for LDAP server & client configuration. From installation.... to.... client login to ldap ubuntu server.
View 2 Replies View RelatedI have installed latest Nvidia driver from the official website i had no problem installing it ( i stopped gdm installed the driver and then restarted gdm ) but the problem is that each time i reboot my ubuntu 10.04 i lose the graphic configurations and i have just to reinstall the Nvidia Driver to make 3d acceleration enabled how can i solve this by installing the driver once and for all
View 1 Replies View RelatedI've been having some problems recently with Ubuntu and my Printer. I find that when using ubuntu, ink drains much faster, and constant refills are required. I know the printer works fine, I use it on windows when ubuntu Fails. Today I was trying to print a colour document out, this was with default config, standard print quality etc., this was the result. On the left you can see the document before printing, and on the right the printed document. (Click to open image in new window)
Example 1 >
Example 2 >
How to just get normal quality printing, without having to revert to ... windows? How can I consult the ink levels of the DX4450 from Ubuntu. I have tried both MtInk and Epsutils and both failed.
I have a laptop that I use in three environments with different monitor setups.
1) At work, I have a 1280x1024 second monitor.
2) At home, I have a 1920x1080 second monitor.
3) In meetings and other places I have no second monitor.
Whenever I switch between these setups, which is at least several times each day, I have to manually change the monitor configuration. I use the nvidia-settings tools.
Granted, it only takes a few seconds. Is there a way to make the system smart enough to automatically detect when a monitor is added or removed, know *which* monitor is attached, and reconfigure the resolution and monitor layouts the way I want them?
What configurations will be required in DNS and sendmail server to send mails from one domain abc.com to other domain xyz.com.
View 1 Replies View RelatedBefore upgrading from Fedora 13 to v.14, VLC Media Player (v1.1.9) worked perfectly. But under Fedora 14, when I try to use it to play .AVI files that played perfectly under Fedora 13 (with the same hardware), VLC opens, stalls for a second, then closes. I've tried several files -- all of which play under Movie Player (and DID play on VLC under Fedora 13), so I know the files themselves are valid. I'd like either to have VLC work under Fedora 14, or revert back to Fedora 13 and permanently block any future upgrade to 14. easy way of rolling back to v.13 without losing my configurations or any of my installed software? Would using a Fedora 13 CD do it?
View 2 Replies View RelatedI am here to ask for some assistance on YAST. When trying to change the date and time through YAST, and clicking on accept, I get an error message saying "cannot save configuration". This is on openSUSE 11.3 x86_64.
View 9 Replies View Related