I am running programs remotely but they are terribly slow. I'm on a windows machine which may be my first problem. I have killer ping and download speed so they should run fine. What can I do to resolve this.
View 2 RepliesI have a program that is completed under Linux, it requires library tidy, PCRE and libcurl, which could be found in Cygwin too.
I could compile my linux program through Cygwin and produce an EXE file, however it do require 'cygwin.dll' installed by the users.
I am wondering if I could have someway to produce out a stand-alone EXE file that could run independently from Cygwin ? ( I don't mind to combine that cygwin.dll and the EXE together for a larger EXE file).
I have a copy of 9.10 that was downloaded at the time of the official 9.10 release. I don't know if there has been improvements made in this area since then. But but anyone know why 9.10 accesses web pages realllll slowly for me. It seems to boot up normally and web pages load normally but connecting to the web page takes a long time, like 10-15 seconds.
View 4 Replies View RelatedHere's my specs:
AMD Semprom 1.8Ghz
512 MB RAM
Nvidia TNT2 M64 @ 32 MB
I know it's old lol but probably better than the onboard graphics. The computer is a Compaq Presario sr1403wm. I checked proprietary drivers and there are none available. The graphics run smooth on the desktop and I don't have Compiz enabled. is the graphics card just too old for XBMC? Weird thing is, I also have the same problem in Ubuntu on my good desktop when it's connected to my TV. Just using a normal VGA cable. If I have it connected to my computer monitor using a DVI cable, there's no problem. The only thing I thought of was maybe the resolution was too high, but that made no difference with either computer. If this computer is too old for XBMC, what would be second best in line? MythTV? Doesn't need TV capabilities. Just to watch what's already on the computer. I just really like the XBMC interface and the fact that I can boot right into the interface and of course all the cool plugins and whatnot.
I am running debian squeeze amd64 i am having trouble with the internet is running real slow on iceweasel ,and update manager freezes when is updating how can i improve this.
View 10 Replies View Relatedi have debian Sid, for past 1 to 1.5 months, i have observed that it has become very slow, in loading programs, opening documents etc. Where should I start looking?Info:-System :- HP DV5 1215Tx Laptop, 2.1 ghz c2d , 500gb WD 5000 bevt harddisk, Nvidia 9600 GT, 2 gig ram .kernel version 2.6.32-4-686Drivers : I use NVIDIA drivers, version 190.53.Network:- I use wired DSL WIFI available but Not in use, nor is bluetooth etc.System is not connected to any other network .Use :- internet, music, movies.Display manager :- KDE 4.3.4Desktop effects :-None, Disabled.My question is , where and how should I start looking?PS I am a linux user for quite a long while.It has been my Only OS for about 4~5 years.But for last 1/2 years because of my studies, i have been out of 'touch' with its commands etc,but willing to dive back in and to stuff on my own, looking for direction here.
View 12 Replies View RelatedAs one of our friends told, I have downloaded and installed the CYGWIN on my winows xp pc, to learn and practice linux commands.when the icon of it is double clicked, its screen as appearing as below:
System1@system ~
$
MY DOUBT IS :
I could make a directory with command like mkdir. But after that it is not allowing commands like touch, vi, vim etc.How i have to write data or a file in it. Still anything to do after installing CYGWIN.
I am using cygwinI am getting these errors when i compile sim_routing.cc program by this command../../bin/cxx sim_routing.ccg++ -Wall -o sim_routing sim_routing.cxxfollowing errors comes../../common/priority_q.h : In member function 'bool guardedQueue<ITEM>::Validate(Const char*);error : there are no argument to 'strcat' that depend on template parameter so a declaration of 'strcat' must be avaible.error : <if you use -fpermissive g++ will accept your code but allowing use of undeclared name is deprecated>error : there are no argument to strcat that depends on template parameter,so declaration to strcat must be avaible
View 1 Replies View RelatedI want to install these libraries in cygwin, how do I do it? are all of them available on cygwin environment or only on linux?
g++ - the version 4.4
graphviz
gnuplot
plotdrop
[Code].....
I can't copy and paste into Cygwin... is there a good alternative to Cygwin that will let me do this?
View 7 Replies View RelatedI want to use the command more to see the content of a text file; however, the command is not available. I wonder whether all linux commands exist in cygwin. I am running cygwin on windows xp.
View 4 Replies View RelatedNew to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
Error: Not ELF
make[2]:*** [scripts/mod/elfconfig.h] Error 1
make[1]:*** [scripts/mod] Error 2
make:***[scripts] Error 2
Every time I try to compile it from the main directory of the source, which I hope is what I'm supposed to do, I always get this.
I installed the CUnit framework which is a .tar.gz file from the bash shell in cygwin.
make gives me an error saying:
make install works
make clean works
I am not able to compile but install works I do not know if it is installed and as to where it is installed
when i checked it gives me a list of header files and also the lib files. I do not know as to why the make command is not working in cygwin. When i go to the bin directory it shows the make command.
I have the binaries: perl-5.10.1-3.tar.bz2 and I don't have access (admin privileges) to run setup.exe for cygwin, my question is how can I install manually inside cygwin the module for perl: perl-5.10.1-3.tar.bz2?(or maybe can I get the sources and compile? can someone tell me please how?)
View 1 Replies View Relatedould recommend for a console hex editor under windows/cygwin/linux?
But I just downloaded cygwin to my xp machine. Tried my first experimental script and created it one level directly below where cygwin put me by default. The script, named show two says:
#!/bin/bash
echo $1
echo $2
But bash apparently can't find it. The name of the script is showtwo, but I also tried naming it showtwo.sh; no dice.
I'm interested in modding an open-source turn based game called Advanced Strategic Command or ASC, but to do that I need bunch of libraries. Installing those libraries is very easy in linux, I know but the thing is I'm working with windows in which the building of the libraries is a bit more complex, as you probably know. One of those libraries is the ligsigc++, I'm using VC++ but haven't been successful in building the libsigc++ in VC++. I considered making my life easier with Cygwin (a unix shell for windows) and simply executing ./Configure, Make. I's worked like a charm and the library dll it produced is named cygsigc-2.0-0.dll which made me wonder is compiling a library in cygwin to be linked with VC++ perfectly ok? That is is there any difference in compiling in cygwin and VC++?
View 2 Replies View RelatedI have installed cygwin to my windows xp machine. I typed the commmand in cygwin shell it shows "command not found". How can i install make command in cygwin
View 2 Replies View RelatedBased on previous forum discussions, I tried to install cygwin with 'make' installed from develop during installation. I can even see 'make.exe' in bin folder, but still while running the make command, it still shows error.
I was confused in one other part. Should I put the bin folder in some specific location or just wherever it is placed during cygwin installation? I was running VIC model, do I need to place the bin folder inside VIC source code folder.
I recently installed Cygwin on my windows vista to practice on Linuxunix commands.I am unable to do a simple task of declaring variables on the command prompt I am trying:
$ vech=Bus
$ echo $vech
bash: vech : command not found
What am I missing? Do i need to add something to .bashrc? Also, I remember right click on the shell command gives the ability to copy or paste text from the shell. I am using Bash, how do I copy n paste text on shell window?
I am very new to Linux. I want to work on GTK. As I came from VB background, I want to use Anjuta IDE to start my design. I installed CYGWIN. When I am trying to install anjuta , I am getting error saying GLIB and Unique1.0 not found :
[Code]...
I'm hoping that someone can help me, I need to remove spaces (not replace with underscores) from several thousand files on a system with cygwin.
Can I do this from the shell using rename or mv somehow?
I installed cygwin with rsync on a Win XP Machine. My goal is to backup a folder from one hard drive to another (both on XP machine).
I run the following command from a batch file:
Works fine except the --delete flag is not working. Copies everything in source to destination, but doesn't delete some extra files that are present on the destination, but aren't on the source, which it's supposed to. I looked at the rsync man page, and I'm doing everything right... such as not using wildcard.
The same command works perfect on another computer (XP machine; source and dest both on XP machine).
Does anyone know or recommend some software or a script to remotely power on a PC from standby to on, or even better from completely off?
I guess the completely OFF to ON is much more complicated - would probably require an extra piece of hardware(?)
I'm not terribly new to Linux, but I am new to the forums, so hear me out! I am in the process of creating an electronic mapwall for our meteorology program, and have designed the computing system from scratch. I have two Linux Boxes, each with capabilities for 6 attached monitors...a total of 12 displays driven from two machines. My intention is to have one machine be the master...it has a touchpanel control. The inputs to the touchpanel will then trigger events for the both the master and the slave machine to display. Each of them has a specific IP address (DNS entry), and are not on a subnet.
Now...is there a way to remotely login to the slave machine and have it display on it's OWN monitors? The code is Java and which works on the master machine to animate directories of .gifs for each of the master's attached monitors. I will most likely have Java execute shell commands for the remote login (ssh), but I believe the answer lies somewhere in the X-configuration. Do I have the machines in an adverse configuration (creation of a subnet would be better)? Lots of questions...lots of desire...few answers!
In my CentOS configuration, when I use vim6.3 to edit a file, then close it, and re-open it, my cursor starts out at the line where I last left off. In my cygwin (on Windows) configuration, when I use vim7.3, I don't get this behavior. The viminfo does exist and does seem to get read (because if I type '0 it will go to my last cursor location - but that is globally and could change the file being edited). I've also looked at the .viminfo file and see it getting updated as expected. In my .vimrc file, I have this:
Quote: set viminfo='100,<50,f1,"500,/100,:100
Note that on the CentOS side if I open foo, then I open bar, then I open foo again, my cursor is in the right place for foo, whereas on cygwin if I do this, my cursor would be at the 1st line of foo.. If I were to type '0, it would actually switch to editing bar and put the cursor where I last left off. Anyhow, this all boils down to asking how I get my cygwin vim to act like my CentOS vim.
I installed C ygwin (full installation) on my PC with WinXP on it.
Then I downloaded "SendIP" at: [URL].
/flin@JKPZV2X /cygdrive/d/software/sendip
$ rpm -ivh sendip-2.5-1.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by sendip-2.5-1
libc.so.6(GLIBC_2.0) is needed by sendip-2.5-1
libc.so.6(GLIBC_2.1) is needed by sendip-2.5-1
libc.so.6(GLIBC_2.1.3) is needed by sendip-2.5-1
libc.so.6(GLIBC_2.3) is needed by sendip-2.5-1
libdl.so.2 is needed by sendip-2.5-1
libdl.so.2(GLIBC_2.0) is needed by sendip-2.5-1
libdl.so.2(GLIBC_2.1) is needed by sendip-2.5-1
libm.so.6 is needed by sendip-2.5-1
flin@JKPZV2X /cygdrive/d/software/send/
compiler problem (f77) which arises when I try to execute a bash script ("compile" see [1] below) running under Cygwin on WinXP. The script finds the correct file(s) but the compiler does not recognize them as fortran source files. If the script is executed sequentially from the command line then there is no problem.
The directory structure of flh971da contains two subdirectories flh971da/scripts and flh971da/source. The compile script [1] is shown (in part) below. The script changes directory to flh971da/source, and compiles source from subdirectories flh971da/source/n where n=a,b,c etc and places the object files in flh971da/source/nobj n=a,b,c... etc. The response to flh971da/scripts/compile script is given below [2]. It is clear that the compiler (f77) locates the correct source file [4] (flh971da/source/a/a00aaft.f) but does not recognize it as a fortran source file. All relevant files have been processed with d2u. I suspect the problem is with the script, but I have no idea how to fix it.
[Code]....
I have good experience in microsoft enviroment, now tiring to use linux, i tried Ubuntu 9.10, OpenSuse on different computers bur there is same big problem: Very slow download speed compared to microsoft.same file at same time downloaded by microsoft winxp toke incomparable short time. for example file 5.5MB attached to e-mail on Yahoo toke ~1minute to download on winxp computer,same file at same computer but with Ubuntu takes more thane 30minutes!
View 3 Replies View RelatedI'm thinking of designing a software that may need to change the current user to a normal user if run as root. But from what i've read, you can still switch back to root if you were root in the first place (meaning, the real UID is 0). I'd like to make this impossible. I think the solution is forking but i'd like you to confirm this.
My question is, does the real UID of the children is the effective UID of the parent at the time the fork is done? My manual lists what's inherited from the parent but doesn't states this. I'd like an answer about Linux kernel and about Unices in general (i'd like to make it at least POSIX-portable)