I have the binaries: perl-5.10.1-3.tar.bz2 and I don't have access (admin privileges) to run setup.exe for cygwin, my question is how can I install manually inside cygwin the module for perl: perl-5.10.1-3.tar.bz2?(or maybe can I get the sources and compile? can someone tell me please how?)
View 1 RepliesI installed C ygwin (full installation) on my PC with WinXP on it.
Then I downloaded "SendIP" at: [URL].
/flin@JKPZV2X /cygdrive/d/software/sendip
$ rpm -ivh sendip-2.5-1.i386.rpm
error: Failed dependencies:
libc.so.6 is needed by sendip-2.5-1
libc.so.6(GLIBC_2.0) is needed by sendip-2.5-1
libc.so.6(GLIBC_2.1) is needed by sendip-2.5-1
libc.so.6(GLIBC_2.1.3) is needed by sendip-2.5-1
libc.so.6(GLIBC_2.3) is needed by sendip-2.5-1
libdl.so.2 is needed by sendip-2.5-1
libdl.so.2(GLIBC_2.0) is needed by sendip-2.5-1
libdl.so.2(GLIBC_2.1) is needed by sendip-2.5-1
libm.so.6 is needed by sendip-2.5-1
flin@JKPZV2X /cygdrive/d/software/send/
I have a program that is completed under Linux, it requires library tidy, PCRE and libcurl, which could be found in Cygwin too.
I could compile my linux program through Cygwin and produce an EXE file, however it do require 'cygwin.dll' installed by the users.
I am wondering if I could have someway to produce out a stand-alone EXE file that could run independently from Cygwin ? ( I don't mind to combine that cygwin.dll and the EXE together for a larger EXE file).
I just found out that jobs -l and man jobs produce no output in my terminal. how could I fix that? How could I install jobs command and its manual on my ubuntu 10.10 ?
View 9 Replies View RelatedI am trying to install Cygwin and then NS2.GCC is not recognized by NS2.gcc -v gives the appropriate output.I dont know whats wrong.Reading specs from /usr/lib/gcc/i686-pc-cygwin/3.4.4/specsgcc version 3.4.4 (cygming special, gdc 0.12, using dmd 0.125)
View 2 Replies View Relatedcommand list that will install
Perl IO::Pty and Perl IO::Tty modules in RED HAT
Im trying to install a rpm package but I get the following error
Code:
perl IO::Pty need by perl-Expect-1.17-1.rh9.rf.noarch.rpm
perl IO::Tty need by perl-Expect-1.17-1.rh9.rf.noarch.rpm
I am using RHEL5 64 bit. I am trying to install bugzilla. While installing i am getting error.
View 2 Replies View RelatedAs one of our friends told, I have downloaded and installed the CYGWIN on my winows xp pc, to learn and practice linux commands.when the icon of it is double clicked, its screen as appearing as below:
System1@system ~
$
MY DOUBT IS :
I could make a directory with command like mkdir. But after that it is not allowing commands like touch, vi, vim etc.How i have to write data or a file in it. Still anything to do after installing CYGWIN.
I'm working in a lab running a CentOS server with Perl 5.8.8.
I would like to install a newer version of Perl for my personal use only (i.e. do not affect other users). How can I do that?
I am using cygwinI am getting these errors when i compile sim_routing.cc program by this command../../bin/cxx sim_routing.ccg++ -Wall -o sim_routing sim_routing.cxxfollowing errors comes../../common/priority_q.h : In member function 'bool guardedQueue<ITEM>::Validate(Const char*);error : there are no argument to 'strcat' that depend on template parameter so a declaration of 'strcat' must be avaible.error : <if you use -fpermissive g++ will accept your code but allowing use of undeclared name is deprecated>error : there are no argument to strcat that depends on template parameter,so declaration to strcat must be avaible
View 1 Replies View RelatedI want to install these libraries in cygwin, how do I do it? are all of them available on cygwin environment or only on linux?
g++ - the version 4.4
graphviz
gnuplot
plotdrop
[Code].....
I can't copy and paste into Cygwin... is there a good alternative to Cygwin that will let me do this?
View 7 Replies View RelatedI want to use the command more to see the content of a text file; however, the command is not available. I wonder whether all linux commands exist in cygwin. I am running cygwin on windows xp.
View 4 Replies View RelatedNew to this kernel stuff But not too new to C/C++. I'm trying to compile the linux kernel on a PC, that is running Windows XP 32 bit, using Cygwin. I keep getting the error saying:
Error: Not ELF
make[2]:*** [scripts/mod/elfconfig.h] Error 1
make[1]:*** [scripts/mod] Error 2
make:***[scripts] Error 2
Every time I try to compile it from the main directory of the source, which I hope is what I'm supposed to do, I always get this.
I installed the CUnit framework which is a .tar.gz file from the bash shell in cygwin.
make gives me an error saying:
make install works
make clean works
I am not able to compile but install works I do not know if it is installed and as to where it is installed
when i checked it gives me a list of header files and also the lib files. I do not know as to why the make command is not working in cygwin. When i go to the bin directory it shows the make command.
So I am stuck in the bootloader hell. With a vintage PC
Ok, so here's the setup:There is one HDD, with two primary partitions: 1st for the system, 2nd for the swap. I booted Luit Linux Live CD, and ran it's HDD install script. The Luit Linux is based on Damn Small Linux that uses kernel version 2.4.22. For some reason, it's bootloader LILO install did something wrong and the fresh install wouldn't boot
Error 15 By the way, I don't understand why the bootloader texts refer to GRUB, while the install script definitely was installing LILO.
I can now boot again with that same Live CD (or any other CD that would boot to Linux), and once loaded, mount the hard disk and check and update it's contents. I'd like to install there as up-to-date GRUB version what that ancient hardware (48MB RAM) can take, and then configure the GRUB to load that install that's sitting on the hdd.I will be very grateful for any advice. Unfortunately my knowledge of things like GRUB is very poor, so it's difficult to look up advice by searching the internet.
ould recommend for a console hex editor under windows/cygwin/linux?
But I just downloaded cygwin to my xp machine. Tried my first experimental script and created it one level directly below where cygwin put me by default. The script, named show two says:
#!/bin/bash
echo $1
echo $2
But bash apparently can't find it. The name of the script is showtwo, but I also tried naming it showtwo.sh; no dice.
I'm interested in modding an open-source turn based game called Advanced Strategic Command or ASC, but to do that I need bunch of libraries. Installing those libraries is very easy in linux, I know but the thing is I'm working with windows in which the building of the libraries is a bit more complex, as you probably know. One of those libraries is the ligsigc++, I'm using VC++ but haven't been successful in building the libsigc++ in VC++. I considered making my life easier with Cygwin (a unix shell for windows) and simply executing ./Configure, Make. I's worked like a charm and the library dll it produced is named cygsigc-2.0-0.dll which made me wonder is compiling a library in cygwin to be linked with VC++ perfectly ok? That is is there any difference in compiling in cygwin and VC++?
View 2 Replies View RelatedI have installed cygwin to my windows xp machine. I typed the commmand in cygwin shell it shows "command not found". How can i install make command in cygwin
View 2 Replies View RelatedBased on previous forum discussions, I tried to install cygwin with 'make' installed from develop during installation. I can even see 'make.exe' in bin folder, but still while running the make command, it still shows error.
I was confused in one other part. Should I put the bin folder in some specific location or just wherever it is placed during cygwin installation? I was running VIC model, do I need to place the bin folder inside VIC source code folder.
I recently installed Cygwin on my windows vista to practice on Linuxunix commands.I am unable to do a simple task of declaring variables on the command prompt I am trying:
$ vech=Bus
$ echo $vech
bash: vech : command not found
What am I missing? Do i need to add something to .bashrc? Also, I remember right click on the shell command gives the ability to copy or paste text from the shell. I am using Bash, how do I copy n paste text on shell window?
I am very new to Linux. I want to work on GTK. As I came from VB background, I want to use Anjuta IDE to start my design. I installed CYGWIN. When I am trying to install anjuta , I am getting error saying GLIB and Unique1.0 not found :
[Code]...
I'm hoping that someone can help me, I need to remove spaces (not replace with underscores) from several thousand files on a system with cygwin.
Can I do this from the shell using rename or mv somehow?
I am running programs remotely but they are terribly slow. I'm on a windows machine which may be my first problem. I have killer ping and download speed so they should run fine. What can I do to resolve this.
View 2 Replies View RelatedI installed cygwin with rsync on a Win XP Machine. My goal is to backup a folder from one hard drive to another (both on XP machine).
I run the following command from a batch file:
Works fine except the --delete flag is not working. Copies everything in source to destination, but doesn't delete some extra files that are present on the destination, but aren't on the source, which it's supposed to. I looked at the rsync man page, and I'm doing everything right... such as not using wildcard.
The same command works perfect on another computer (XP machine; source and dest both on XP machine).
I have fedora core on my PC and newly I installed Debian 5.3 on my lap top but found that it has not lots of manual pages for command and C or C++ libraries that fedora has. How can I install them
View 3 Replies View RelatedIn my CentOS configuration, when I use vim6.3 to edit a file, then close it, and re-open it, my cursor starts out at the line where I last left off. In my cygwin (on Windows) configuration, when I use vim7.3, I don't get this behavior. The viminfo does exist and does seem to get read (because if I type '0 it will go to my last cursor location - but that is globally and could change the file being edited). I've also looked at the .viminfo file and see it getting updated as expected. In my .vimrc file, I have this:
Quote: set viminfo='100,<50,f1,"500,/100,:100
Note that on the CentOS side if I open foo, then I open bar, then I open foo again, my cursor is in the right place for foo, whereas on cygwin if I do this, my cursor would be at the 1st line of foo.. If I were to type '0, it would actually switch to editing bar and put the cursor where I last left off. Anyhow, this all boils down to asking how I get my cygwin vim to act like my CentOS vim.
I have recently installed Debian Squeeze on my main machine at home. I used the default installation options, which meant gnome was installed as the display manager/GUI. Once I got the system up and running, I have attempted to install the latest KDE display manager/GUI. I executed the following commands:
$sudo apt-get install kde4
and then responded as required when asked if I really wanted to get and install the huge list of programs this involved.
When booting up in runlevel 3, I would log in, and then execute the following command:
$ sudo kdm
the screen would go blank and I would eventually get a KDE error message saying:
"Cannot open theme file @@@ToBeReplacedByDesktopBase@@@"
I would then be given only the option to press OK, which would dump me back out to the command line. I can get the GUI to start by executing "Startx", which doesn't require sudo to run I might add. The problem is that this command starts gnome. I would like to start X from the command line, but be given a choice of either GNOME or KDE.
Question 1: How do I fix the issue which generates the error message detailed above?
Question 2: How do I set up X to ask me which display manager I would like to use? and
Question 3: Am I correct in assuming that KDM shouldn't require sudo to run? If so, how do I adjust the situation so that it is correctly configured to run like gnome (without requiring root access to run)?
UPDATE 8/28/2009: I now recommend that people install the new packages instead of the manual instructions below, see this link:http://forums.fedoraforum.org/showthread.php?t=155503 (Howto for fglrx/catalyst (Ati driver) and Compiz-fusion)NOTE: After installing the packages, I had to do the things at the following link to make the above packages work:http://forums.fedoraforum.org/showpo...postcount=3564If you still want to install the driver manually (you do not need to if you install the packages above), the instructions are below:
Fedora 11 ATI fglrx driver manual install notes
Updated: 10/12/2009
========================================
[code]....