so i got several problems with dirvers i guess, the touchpad doesn't work really, the cursor jumbs all over the place and the microphone doesn't work at all, i updated the system several times, my Laptop is a Lenovo B560
View 4 Replies
I have installed synaptics touchpad drivers , but ubuntu cannot find the touchpad.
View 1 Replies View RelatedI have a big problem after i installed the ATI proprietary drivers. I expected something weird to happen when using proprietary stuff, but I did not expect them to stop my touchpad from functioning
I've been running sid on that laptop for ages and followed the guide on the Debian wiki and installed: "apt-get install linux-headers-2.6-$(uname -r | sed 's,.*-,,') fglrx-control fglrx-driver". This worked like a charm and the module got compiled OK. I then rebooted the computer (couldn't restart Xorg, the screen went black for some reason, but that's not the issue here) but when the kernel started it dumped a lot of udev errors concerning libsane. It booted up OK though, but when i tried to log in i couldn't use my keyboard or my touchpad. My external keyboard and mouse worked, but i had to disconnect them and connect them again to get them working. I suspect that the laptop keyboard and touchpad are connected by usb internally, but they are tricky to disconnect and reconnect
I then did a "apt-get remove" on all those packages installed and also an "apt-get install --reinstall" on the kernel. But I still have the same problem. I suspect that dkms did something bad, but I can't figure out what to remove or reinstall to get around this problem. I also tried to remove libsane, since udev dumped a lot of error messages, but I don't understand what the connection is there (except of course that udev is used for the keyboard and touchpad)
I also don't suspect the "unstableness" of sid to be the problem here. Rather something I haven't removed or reinstalled.
Does anyone have an idea about what I can do to revert this? I really don't want to reinstall the laptop.
Edit: Just, to sum it up. The real question here is: "How do I get rid of all the mess that ATI proprietary driver caused and installed?"
I just installed Debian on my new VAIO VPCS13. It seems to be working for the most part, except it does not recognize my Synaptics touchpad at all.
I've had Ubuntu installed on this computer before and the mousepad worked fine. This being Debian on a new-generation computer, it makes me think that Debian just probably hasn't released the update yet.
Where can i get linux drivers for my QHM 500 LM CAMERA (6 lights & microphone 500 K pixel).
View 3 Replies View RelatedWhere can i get linux drivers for my QHM 500 LM CAMERA (with 6 lights & microphone 500 K pixel). i had been using windows for 12 years.
The full details of my webcam are on this link [url]
I could not find the linux drivers on this link [url]
I am running Ubuntu 10.04 Lucid Lynx LTS. My laptop is an HP Pavilion TX1210AU (TX1000 series). After disabling the touchpad using the toggle button and reenabling it again, it stopped working. I tried restarting my laptop and the mouse worked again only up to the Login Screen. After logging in to my account, the mouse froze again. I tried making a new account and tried logging into it (I'm using it now) and it's now fixed. Does Ubuntu change any user settings everytime the touchpad toggle (on/off) button is switched? Maybe I could just reenable it myself.
View 2 Replies View RelatedI couldn't find a place to post Cent OS questions so don't bite if this is in the wrong place
I have a KeySonic 2.4Ghz Wireless Keyboard with Integrated TouchPad which I am trying to get to work.
Now there are some reviews saying it works straight out the box on Linux. This was almost the case for me.
The keyboard works straight away but the touch pad doesn't work at all not even the mouse buttons
I am running CentOS release 5.3 (Final) Kernel 2.6.18-128.el5
I would really appreciate any advice at all, I have checked the output of: cat /proc/bus/input/devices
Which gives:
Code:
I"m running an online radio station and would like to run my headphone audio into my microphone or a virtual microphone, either way, I would like my audience to hear what I hear without having to hold the Mic to the speakers.
View 2 Replies View RelatedI tried lspci, lsusb and lshw but none of those lists my touchpad device. Where to look now?
View 1 Replies View Relatedwhenever i hibernate or shut down my laptop,its touch pad automatically turns off..next time i login,i've to start it by pressing Fn+F8(which i think is my laptop custom shortcut).
View 5 Replies View RelatedI had a post about how my "e" key turns my touchpad on/off as well as typing the letter "e". For some reason it generates two keystrokes. So, I was wondering how the operating system (I'm using openSUSE distro) controls the state of the keyboard. I assume somewhere there's a way to say "keep touchpad on at all times", or even better "when toggling touchpad if touchpad is off, turn it on"... Somewhere I think deep within the OS. Does anyone know where I can go to change that?
View 3 Replies View RelatedThe touchpad on my Lenovo Z560 is to sensitive. I went into the mouse setting and adjusted the pointer speed sensitivity as low as possible but I don't see any difference. The lightest touch will move the pointer. I saw where some have modified the xorg.conf file but I can't find it in Ubuntu 11.04. From what I could find with Google this laptop uses a Synaptics touchpad. I installed Gpointing-device-settings and was able to change the speed but not the sensitivity. How can I make the touchpad less sensitive?
View 10 Replies View RelatedMy Laptop is a Sony VAIO VPCS12C5E. I recently installed Fedora 13 (x64). I have the problem that the Touchpad is not working at all.The following Synaptics driver is installed:
xorg-x11-drv-synaptics-1.2.2-6.fc13.x86_64
Touchpad is not listed in GPointing (Version 1.5.1-2) A USB Mouse is working fine. I tried adding the following configuration to a new X11 conf file under /etc/X11/xorg.conf.d/01-synaptics.conf
Section "InputClass"
Identifier "touchpad catchall"
MatchIsTouchpad "on"
Driver "synaptics"
EndSection
I got the configuration from [URL]
I just upgraded from Ubuntu 8.1 to 9.1. Selecting (tapping) with the touchpad is a problem. I can not adjust it with the System > Preferences > Touchpad GUI. I have to tap and tap and tap, harder and harder. The sensitivity is way off. Can't adjust it with the GUI.
Anyone else have this issue. I'm using a Dell Inspiron.
More info: sometimes I tap and it works. Other times I have to tap tap tap tap, harder and harder. I believe it's a matter of adjusting the sensitivity of the touchpad, but do not know how to do this after upgrading to 9.1.
Can't do it with the GUI.
I am using a acer laptop with ubuntu 10.04
View 2 Replies View RelatedI have Linux Fedora, and unfortunately my touch pad does not work I wanted to know where I can download a driver?
View 10 Replies View RelatedIn linux how can i find what is my sound card path and microphone path? Some application is using /dev/dsp but how to make sure what is mine?
View 2 Replies View RelatedI bought a laptop off ebay, its a Compaq Presario CQ60-305EA. I think it has a built in microphone. I was using skype and I couldnt get the microphone to work. I never got a disc or anything with the laptop so I am not sure if you are supposed to install it or whatever. I did that sound check test but it couldnt trace anything If anybody knows could they tell me does this laptop even have a built in microphone and if so how do I work it?
View 3 Replies View RelatedI need debug my program and I need something like a virtual microphone. I would like device "microphone" where I can put sound file and this file will be input for microphone stream. And in application I get this stream from this "microphone"
File -> Microphone -> Application
is it possible?
something like bash command should by very very useful:
aplay --device=mic my_microphone.wav to run a microphone stream
I am experimenting with attaching a second monitor to my Ubuntu Natty laptop, and I have noticed an annoying "feature" that makes any multi-monitor setup so unusable that I actually prefer my single-monitor laptop setup. It appears that the system automatically "scales" the X- and Y-axis sensitivity of the touchpad to match the dimensions of the "virtual" screen that spans across multiple monitors. This is best illustrated with an example. If I set up two monitors side-by-side, the touchpad's X-axis speed is doubled, so that moving my finger the same distance on the touchpad causes the mouse on the screen to move twice as far in the X direction as it did when I had only a single monitor. Yet the Y-axis sensitivity remains unchanged, so all diagonal mouse movements end up at the wrong angle. This makes the touchpad almost completely useless, since the mouse on the screen does not move in the same direction as my hand on the pad.
Is there anything I can do about this? I just want the X- and Y-axis speeds to be identical, and I definitely don't want my mouse sensitivity changing because I added a screen. The touchpad is a Synaptics touchpad, by the way. The laptop is a Dell M1330 with an nVidia graphics card.
I have recently installed Linux mint on my 2007 mac book pro and i found that my touch pad/track pad is not as sensitive as it was running the mac os. i can no longer move my cursor with the tip of my finger.
View 3 Replies View RelatedToday I spent more than an hour trying to get Skype set up on my Linux box (Debian testing), but I couldn't make my microphone to work correctly. So I hear the other person talking, but they can't hear me. I am running KDE 4.3 and Skype 2.1 Beta. What do I need to do to get it working?
View 2 Replies View RelatedFirst off, this isn't the usual "physical" feedback of a speaker being too close to the mic. This mic is part of a headset so there's no way for the output and input to overlap and cause feedback. This mic has worked perfectly for me in the past, but I recently re-installed my OS and it hasn't worked since.
It seems as if my audio out is getting redirected to microphone in. If I open up and sound recording program while I have some audio being output, the output will get echoed back in through the microphone channel, although any actual microphone input is never picked up. I can blow or scream into the mic and there's no indication at all that Linux is picking it up.
I'm running ArchLinux with ALSA. I've gone into alsa mixer and played with just about every channel in every way I can think of, and none of the options seem to fix the problem.
How should I fix this? I use my mic pretty much constantly when I'm on the computer, being without it sucks.
My headphones jack is broken. I wonder is it possible to force a sound system output sound through microphone jack? As result I want plug-in headphones to microphone jack and get the sound. Or BIOS handle it?
View 1 Replies View RelatedI believe it is PS/2 but I am unsure. There isn't an option in the GNOME interface to edit this, either. Am I missing some sort of GNOME utility, or what?
View 2 Replies View RelatedI work on a laptop and typically have a USB mouse plugged in. Each time I start an X session, I switch my mouse buttons with an: Quote:
xmodmap -e "pointer = 3 2 1"
If I decide to unplug the mouse and work with the touchpad, I must always reverse the options again to pointer = 1 2 3, or else, while the right and the left button still work as a left-handed mouse, tapping, instead of acting like a left-click, gives a right-click menu. My touchpad is listed as:
'ImPS/2 Synaptics TouchPad'
using the evdev driver.
I admit that I haven't played much with alternate xmodmap configurations, but I'd like to sort this out. It's even more confusing since I don't have a xorg.conf and, if I manually add one, despite having tried repeatedly, I can't make X-server to read it.
The relevant part of lshal output: Quote:
udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
info.capabilities = {'input', 'input.mouse'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.product = 'ImPS/2 Synaptics TouchPad' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
[Code]......
I am looking for a tool that will tell me, in less than half a second, if the microphone is picking up any sound above a certain threshold. (I plan to then mute the Master channel with another command line tool, like amixer.)
View 1 Replies View RelatedI have a asus g50v laptop with a built in webcam and microphone running ubuntu 10.04 32 bit and its not detecting the webcam / microphone
View 12 Replies View RelatedAfter clear installation of Slackware 13.1 GSB 2.30, and editing /etc/hal/fdi/polices/x11-synaptics.fdi .xml file "TapButton1" still does not work
x11-synaptics.fdi
Code:
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
[Code]...
