I had linux installed on dell latitude d600, I did fdisk and deleted the OS so I can install Xp. When I try to boot from the Window xp cd , I get LINUX grub command line . " grub>" and can't do anything.I need window installed ASAP for a class that I am taking .
View 2 Replies
A failed upgrade, from disk images, of Fedora 10 to 11 resulted in no GRUB bootloader main menu appearing on bootup (no WIN, no LINUX choices from which to boot). I am booted directly into the GRUB command shell...so, no WIN, no LINUX, nothing. And my understanding of GRUB shell commands is very low.I have 2 hard disks, WIN on the first, LINUX on the second. I believe GRUB Bootloader is on the first disk.Sadly, I have no external install media.An old grub.conf hardcopy indicates that root =/dev/sdb2, root (hd1,0), kernel /vmlinuz....olderversion...(relative to /boot),initrd /initrd...olderversion... (relative to boot). and WINDOWS on (hd0,1), with chainloader +1
I need to somehow get past this grub shell, and re-install/re-instate the grub bootloader, so it can boot normally.What grub command(s) must I use? I've played around with the commands, but with no success.I worry that if I can't resolve this, the whole machine may be useless.
I used the Wubi installer to install the latest version (available from the website) on my second physical HDD. I rebooted my machine and used the Windows 7 bootloader to launch Ubuntu and it launched a GUI install. I wasn't sure how long it was going to take, so I left for about a half hour and when I returned I was back to my Windows 7 logon screen. Naturally, I assumed the install was a success and I rebooted my machine. When I boot again I get the Windows bootloader and I see my options for Windows 7 (which works properly) or Ubuntu. However, if I select Ubuntu I am brought to a command-line and there is an output at the top of the screen stating "Grub bootloader." At this point do I need to type anything to launch the GUI (I'm assuming Gnome) from this? How should I proceed from this point, reinstall?
View 9 Replies View RelatedAfter installing the 10.10 Maverick Meerkat, I decided to have a new partition and install Windows 7 on it for development purposes. So this is the method I worked with:
Partitioned the hard disk with gparted
Formatted the drive in NTFS
Installed Windows
Booted into Ubuntu 10.10 Live CD and re-installed grub on the MBR Now after restarting the system a grub command line boots up. I was able to boot into ubuntu with the following commands:
Code:
find /vmlinuz
kernel /vmlinuz root=/dev/hda1 (or its equivalent)
initrd /initrd
boot
Is there any way how to load up the grub GUI with the options to boot up Ubuntu or Windows 7 respectively?
I wanted to install Debian 8.0 on my second hdd in my UEFI machine, but when I choose UEFI boot from USB, GRUB command line appears, and I cannot boot up the setup. I used Rufus to create the bootable USB stick, using the amd64 kde CD image. I tried several images and I deleted the Linux and Efi partitions from previous installation of Ubuntu . Also I deleted GRUB from the Windows 7 Efi partition.
In the UEFI setup fast boot and secure boot are disabled, and I don't seem to have the option to boot in legacy mode, if I choose the simple USB boot option (without "UEFI" in front) I get "please insert correct boot media, and press any key or reboot". I couldn't manually boot from GRUB command line, because it is showing that all the drives are empty, and if I type "boot" I get "please load the kernel first".
I just installed Windows 7 and it erased my Grub bootloader. I followed this tutorial: URL...And now when my computer starts up it goes to the Grub prompt: Code: grub>I guess I did not do the right partition but I'm having a lot of trouble getting it back to how it was where my computer at least loaded the Windows 7 loader.
View 1 Replies View RelatedThe ability to manually boot using the Grub command-line constitutes a big security risk in Linux, IMO.Any OS can be booted in this manner from a PXE-LAN, USB, or CD/DVD drive, circumventing BIOS-imposed boot restrictions. (Once a foreign OS is booted, of course, it can be used to access any part of an unencrypted hard drive.) Placing passwords or locking menu items (in the Grub configuration files) does not prevent a user from booting manually using commands entered at the grub command-line.
As it stands now, when presented with the Grub menu (or after bringing up a hidden Grub menu with the "ESC" key), a user only needs to hit "c" to enter the Grub command-line mode to facilitate any type of bootup whatsoever. (They can then enter manually the Grub commands to boot an OS on any device.) This is extremely insecure and allows any passerby to boot the computer with a few keystrokes and a bootable USB drive. How do I configure Grub so that it will require a password in order to enter the command-line mode (and thereby restrict boot options to the menu, which can then be password protected/locked) ?
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies View Relatedwhat command initializes a drive array on Fedora12? I'm trying to initialize the drive command for linear RAID and the command given in the textbook is for Fedora Core 2 (which I had problems with in Virtualbox).
View 4 Replies View Relatedhow to write a command (for loop) that would ping a Class C subnet to make it so that it only replies once and does not show the statistics?
View 2 Replies View RelatedI have an 8 gig ssd Dell vostro that has been running ubuntu linux successfully for several months. Linux is the only O.S. on the machine. Wishing to have more room I inserted a new 32 Gig SDHC card in the card slot and did an ext4 format and then did an install using the 10.10 disk that did the original install. Everything seemed to proceed as expected, but it rebooted using the 8 Gig drive. The 32 Gig card appears to have all the proper files. How do I get it to boot from that card?
View 3 Replies View RelatedFinished installing Ubuntu 10.10 in my XPS15, intel i5 4g ram, nvidia GT 420M graphics card,
problem is when i go to additional drivers, the driver listed (Nvidia accelerated graphics) when I install it and reboot it the computer starts on the terminal, no graphic interface. All I get is the black screen asking me login and password, when I enter them, just get the terminal prompt in a black screen.
I recently installed Kubuntu with the windows installer wubi. Everything has gone fine until today. When i turn on the pc i normally have a prompt to go to windows or kubuntu. I choose Kubuntu and it loads it up. But now it goes to a grub prompt and i have no idea how to fix this or get into Kubuntu.
Things i did before the last reboot that may have caused this.
I edited my swappiness to help speed things up at the advice of many websites.
Example: url
I changed it from 60 to 10. I did this by adding the line "vm.swappiness=10" to the end of sysctl.conf
I noticed that there was a # or something at the beginning of every line in sysctl.conf and i did NOT add it to my line. This is my guess as to why i am having problems.
The other thing i did was some bug updates. Something was popping up down by the clock area and it was asking me to do some bug updates of some sort. I said yes.
Any idea on how i can fix this? As of now i cannot get into kubuntu at all. It just gives me a grub command prompt.
I have a roughly 3-year old PC that I put together from parts (listed below) that has been running great with various flavors of Linux as the sole operating system. It is currently running Ubuntu 10.4. A couple of months ago, it started to have intermittent problems booting. The machine will hang before it gets to the Ubuntu "boot" screen with the dots that show progress as the machine boots. If I look at the power on messages from the BIOS, it fails at different points in the process - sometimes during the memory test, sometimes during the search for IDE drives. It fails about 2 out of every 5 attempts to boot. It sometimes takes 2-3 tries at booting before it actually works. Sometimes when it does boot, the Ethernet jack doesn't work and I see errors in syslog about there not being a carrier.
There are no syslog entries when the machine does not boot.The machine is plugged into a UPS. The UPS indicates that it is running at 13% of capacity at 123V/60Hz. I'm in the US.Once the machine boots normally, it will stay up without issues for days.I've checked the 4GB of RAM (I added 2GB to the original 2GB several months ago) using the memory testing application on the System Rescue CD and no errors were found.I've replaced the motherboard battery, which seemed to help for a few weeks, but then the problem returned.I've checked the hard drive for errors using the SMART diagnostics tool in System -> Administration -> Disk Utility and buy running fsck.The interior of the case is not very dusty and all the fans appear to be working.Are there things I can do to investigate and fix this issue other than starting to replace components - starting with the motherboard and the power supply?The parts of the machine:
CPU INTEL|C2D E6850 3G 65N 4M R - Retail (Qty=1, Price=$279.99)
CASE ANTEC|P180B BLACK RT - Retail (Qty=1, Price=$114.99)
MB GIGABYTE GA-P35-DS3L P35+ICH9 - Retail (Qty=1, Price=$111.99)
[code]....
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI have windows7 installed in my laptop. I tried installing Redhat linux in it, and I was successful. But then I logged in with windows7 and deleted the partition in which I had installed redhat through computer management. Now my system doesnt boot with windows instead it boots with GRUB. Also to inform that the deleted linux partition I merged with Windows.
View 2 Replies View RelatedIn a couple days I plan on changing to opensuse from kubuntu. Anyway in the Kpackagemanager I removed the pulseaudio client (and its dependencies) and it messed up my system a bit. I don't really mind but all I need is to get my files from my home folder off my hdd to an external through usb 2.0. When Kubuntu 9.10 boots now all it is is a command terminal basically and I don't know the specific commands to get the files. Or if I need to reinstall something so that it boots up with a graphical looking UI again.
View 14 Replies View RelatedIn order to get the work done I use a Macintosh Macbook Pro (4,1) with a Boot camp partition running Windows 7.This allows me to use my favorite OS (OSX) with my required work environment (Win7 & .Net) when ever I need them.To allow me smooth usage I use Parallels 5 to virtually boot my Win7 machine from within OSX but whenever I want to do some heavy lifting I reboot into Windows 7 (on boot camp) which allows me to use my laptop's entire resources for my work.
My problem is this: I am now about to begin work for a company in Tel Aviv which uses Linux desktops for development and I need to follow suit. So I've given my self a new Quest: Set up the ultimate web development platform. My goal is this-
1. Install the three operating systems one along side the other - OSX, Ubuntu & Windows 7.
2. Set each one of them up in such a way that allows me to boot into it (meaning I can have any one of these OSs running on its own when I want.
3. Use parallels to virtually boot my Win7 partition - this allows me to keep using Office 2007, which I use often.
4. optional! Use parallels to virtually boot the Ubuntu OS also.
I have managed to complete goal 1 & 2.But I simply can't get 3...In theory it isn't a problem to install windows & OSX along side each other and virtually boot the windows under OSX using parallel's bootcamp virtualizer- BUT - the moment I install Linux along side the other two it break's parallel's virtualizer and it can't boot. I think it is due to parallel's in ability to use GRUB but I'm not actually sure about that.
I am considering compromising and going for a system like this:
1. Install OSX and Ubuntu on the laptop - which means I can boot into each of them.
2. Create a virtual machine for Win7 using parallels.
But that will be a real compromise as far as I'm concerned and I hope to find a way to set up the machine as I described earlier (three OSs which can be booted independently and also loaded in VMs).Just to make sure I'm clear - I HAVE MANAGED to install three independent OSs on the same machine - but that always prevents me from booting them as VMs using parallels...
i am using window and linux in a single laptop.i want to access the files in present in linux os ,into the window machine.
View 5 Replies View RelatedI wanted to check what version of GRUB I have installed. I went to terminal and typed grub --versionI got this message back: The program 'grub' is currently not installed. You can install it by typing: sudo apt-get install grub
I am running Ubuntu 10.10 alongside windows xp pro. When I turn my pc on I have the option to boot to ubuntu or xp and at the top of the window it says that the version of grub running is "GNU GRUB Version 1.98+20100804-5Ubuntu-3" how I shold go about installing GRUB 2 or just leave it as is.
Out of curiosity and stupidity, I configured 2 extended partitions to LVM in gparted. Now, I can't boot into X window, and there's only GRUB command line during boot.
View 5 Replies View Relatedwe have a sambe share from our window pc, we cant delete or cut/paste file however creation of new file r possible, where we give full permission.
the samba username is premiaadmin, where all permission given like root see below
[root@tmsrvr2 ~]# service smb start
Starting SMB services: [ OK ]
Starting NMB services: [ OK ]
[root@tmsrvr2 ~]# setfacl -m uremiaadmin:rwx /premia
[Code].....
I have a problem with compiling vdrift-2009-06-15 using scons. As the source that i obtained only supports scons i cannot use make. the error that i get when i try to compile it in GNOME Terminal is: scons: Reading SConscript files ... scons: warning: The Options class is deprecated; use the Variables class instead.
File "/home/mohit/Download/vdrift-2009-06-15/SConstruct", line 9, in <module>
scons: warning: The BoolOption() function is deprecated; use the BoolVariable() function instead.
File "/home/mohit/Download/vdrift-2009-06-15/SConstruct", line 13, in <module>
Checking for C++ header file asio.hpp... (cached) yes
Checking for C++ header file boost/bind.hpp... (cached) yes
Checking for C++ header file GL/gl.h... (cached) yes
Checking for C++ header file GL/glu.h... (cached) yes
Checking for C++ header file SDL/SDL.h... (cached) yes
[Code]........
In completely new to Fedora. After a clean install, I went through, configured yum, did all yum updates and rebooted. I then installed the graphics card (m9500 gs) using RPMfusion and restarted again. After doing so, the comp shows the fedora loading bar but once it finishes, it hangs there and you see a small flashing box. I have no idea how to uninstall that nvidia driver.
to my xorg.conf. Still same issue. Finally I went through and added the "notap" to the grub.conf. I am at a complete loss here. When I try and manually load the driver, the Nvidia installer gives and error about not finding any preconfigured kernels for the package. Then It try's to build its own kernel but says its missing the "cc" in the "gcc" package. Any ideas? If you want to know exactly what I've done so far, I pretty much only followed the guide at my-guides.net. As you might be able to tell, I am very NOOB.
I recently installed Ubtuntu Linux 10.04 and like it but want to go back to Windows. I tried booting from an XP CD-R I have but I got some error while @ a blue installation screen. So I made another CD-R WinXP again (bootable) But same problem. I really want to go back to Windows without messing up my Laptop.
View 8 Replies View RelatedI have a wide screen monitor (1440x900). I would like to change the fonts used when the machine boots and shuts down. Right now they are huge and the first 1-2 characters are hidden.
View 3 Replies View RelatedMy old OS was Windows Xp i have installed Ubutu 2.32.0 i am not able to add window to the grub
View 2 Replies View Relatedview all the software installed on my RHEL 5 machine. Can we find any utility like Add/Remove Programs in Windows?
View 4 Replies View RelatedI had created 4 partitions of my 320 gb harddrive.
First 40 gb was reserved for xp , next 4 gb was swap partition , next 20 gb was linux main partition, and after it there is free space. I first installed linux on 3rd partition. I later installed win xp on the first partition. My laptop directly boots in xp . I don't see Debian listed even after pressing F8.
How do I re-access debian linux ?
I am installed cUrl from http://packages.ubuntu.com/lucid/amd64/curl/download for my ubuntu 9.0 with php 5.2 ,Apache 2.0.It was installed by gkebi package installer. but when i display phpinfo() curl not found since i was attempt to use phptwitter class. what is the proble i have? When i am trying to install again package installer shows same version of curl already found, but phptwitterclass shows following error 'Method "curlQuery" of class "Twitter" reported an error: CURL library not installed.'
View 1 Replies View Related
