I have been requested to deliver the logs for last friday, but the problem is that I have configured squid logs to be weekly, not daily. How can I extract the logs generated friday from the week file?
View 3 RepliesMy squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View Relatedi am monitoring access log messages in squid proxy server,can it possible to get date,time,day in access logs is it possible
View 2 Replies View RelatedIs there any way to delete squid proxy access logs. e how can the access logs be deleted
View 6 Replies View RelatedI've installed squid 2.7 stable9 in centos 5.4 x32 bit. I've installed and configured it successfully, its working fine. I want to clear few doubts, for that your kind help is needed. Parallely, I've configured another server using binary rpms with same squid version (2.7 stable9). I found that it creates a /etc/logrotate.d/squid for rotating log files (access.log, cache.log, store.log). Which is properly rotating log files using compress, dateext and size options (i manually added the size option).
But after compiling and installing from source code, its automatically not created. I want to rotate the log files in the same way as it is doing when i install using binary rpms. Below logfile_rotate entry is present in my squid.conf file (in source code installation scenario) logfile_rotate 10 Below logfile_rotate entry is present in my squid.conf file which is commented (in binary rpm installation scenario) #logfile_rotate 10 I want to rotate the log files by size (as I've more than 200 users, these logfiles size increasing very fast, ie. approx 80 MB per hour), with compress and dateext option.
I am trying to set up a free wireless network for clients for a small business. I have a wireless router that I plan on hooking up to our main router. I want to keep all the computers that are associated with the wireless router from being able to access the rest of the network hooked up to our main router. I think one solution might be to put the wireless router in a DMZ. I think this should isolate it from the rest of the network (and have a side-effect of sending outside traffic to the wireless router, which shouldn't matter). Will this work? Also, if I just make both routers have the same subnet (e.g. 192.168.1.x), will my wireless router just filter out requests for computers on our main network as requests for (non-existent) computers on its local network? Any other ideas are welcome.
View 2 Replies View RelatedHow to get the week number in linux using gawk with different first day of the week? the date command can give me the week number with +%V but it is based on Monday (1-53) or +%U (based on Sunday, 0-53).
I tried to to do this: date -d "ddmmyy+2days" +%V, but the result is not correct. I want the first day of the week is based on Saturday.
i am going to write rhce exam in this month ,i want some tips how to do revision for the same.
View 1 Replies View RelatedWe need to collect data from nagios once a week and have it sent/mailed.What would be a good place to get it? I am thinking starting with nagios/var/nagios.logscan it once a week and get most recent entries from each hosts.
View 3 Replies View RelatedI am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
I have a WindowsXP virtual machine which I need to isolate from the host machine completely (have the host act as a bridge but not be visible on the IP layer at all.) It still needs to have Internet access. Obviously it has to be able to contact the router but I would like to be able to block port 80 (or even just block all SYN packets addressed to the router.) I also want to allow port forwarding from the router to the virtual machine. I can use basic iptables but this is way beyond me.
The host OS is probably going to be Debian Lenny but this is not built yet so if someone can recommend a different distro which is as lightweight as possible but will support VMWare, iptables and tcpdump then that would be great. I was thinking of Slackware but I have not used it in ages and from what I can remember their is no real package management.
When I try to login as me - it gets pretty far but then something happens and automatically logs out. This happens in Gnome, Kde too. Now - I have no problem logging in a Root. Is there a way I can try to stop the login process before it kicks me out, or is there a way to look at some files to tell me what's going on?
View 3 Replies View RelatedSomeone knows how to change the first day of the week in the calendar popup to Monday?I already looked in /usr/share/gnome-shell/js/ui/calendar.js but I didn't saw where I have to change that (my knowledge of JavaScript isn't very good yet)
View 1 Replies View RelatedI installed ubuntu a mount ago, since then my vista goes bluescreen almost every week, I have vista business sp2 32bit and ubuntu 9.10 32bit dual boot. Details about one of bluescreens is below:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.256.6
Locale ID: 1033
Additional information about the problem:
BCCode: be
BCP1: 837020B7
BCP2: 28EA0860
BCP3: 8BB63A18
BCP4: 0000000E
OS Version: 6_0_6002
Service Pack: 2_0
Product: 256_1
Files that help describe the problem:
C:WindowsMinidumpMini020110-01.dmp
C:Users
afisehAppDataLocalTempWER-50060-0.sysdata.xml
C:Users
afisehAppDataLocalTempWER8304.tmp.version.txt
Read our privacy statement: [URL]
I logged on my ibm600e with SUSE 11.1 + on Thanksgiving and auto update started and is still running today 12/02/2009. Pentium cpu is at 77 to 97% 93% memory usage plus some swap usage. Ethernet and wireless are activeily working
also separately the CD ROM is not detecting/detected except by the hardware report I sent in. My external Zip100 Is visible. as is the plug in floppy drive
My linux is very limited
I am using the following to find the Day of the Week on my server which is in UTC.
Code:
But say if I want to find the Day of the Week in another timezone, how would one go about it. I had a look at date --help but could not find any timezone related switches so am not sure if this is possible using this method.
Update:
This appears to work but is this the only way?
Code:
On our app server the logs from the Sybase Mobilink service get logged to /var/log because of that I did a chmod a+rx /var/log and all is well until.... the next day QA logs in goes to check the logs and gets:
Quote:
qa@dwdb [~]$ ls /var/log
ls: /var/log: Permission denied
qa@dwdb [~]$
I have a cyclical problem. After a new fedora installation the calendar week start with sunday and I want to change it with monday. I tried with many guide without success (the latest is this: [URL]). Is possible to say how to change it? The version is fedora 14.
View 3 Replies View RelatedSuse 11.3/Gnome 2.30.0
Evolution 2.30.1.2
I cannot get the monthly view to start the week on Sunday. The settings seem right but they don't stick. Restarting Evolution always defaults to a week start on Monday even though the defaults display Sunday. I've viewed the default settings the following two ways:
Within Evolution... Edit > Preferences > Calendar and Tasks > week starts on "Sunday"
GNOME Configuration editor.../apps/evolution/calendar/display/week_start_day = 0 (Sunday)
My system specification:I am using is in my PC(stand alone) with the following system config..AMD Sempron(tm) processor2500+704 MB RAMASUS mother board..buntu version 9.10When I click ubuntu software center ->search any software ->select the software -> click the arrow at right corner->then click install button for me nothing happens. It was installing for one week and now it seems to be not. It gives no error message no action, but just static. Is that a paid version or i am missing something basic? I have tried to do the following
sudo dpkg --configure -a
sudo apt-get update
sudo apt-get upgrade
If i use my Ubuntu some times per week, there isn't any problem. But if i don't use it for a short time (a week), when i want use it again and select it on GRUB.. after the first loading screen (on Ubuntu 10.04 the purple screen with Ubuntu in white and some points under), my screen is black. The computer screen is receiving signal because the led is green and not brown/orange like when is on standby mode. On Windows i haven't any problem.
First time it happened with Ubuntu 9.10. I didn't got solution for it and i format the partition and install the 10.04. But now it happen again with 10.04. I have an ATI 5770 and i have tried drivers since 9.12 till 10.4 (last ones the best i have had) On versions before 9.10 i had no problem, but i can't confirm that, because i had other graphic card (NVIDIA 9800GT). But the 5770 didn't work well on previous version so i updated to 9.10 and after this problem, updated to 10.04.
At spanish forum, people don't know solution for this problem, they never read about a similar problem. I hope you know a solution for it, because the only one i found and work is.. format and reinstall.
I'm running Ubuntu 10.04 which was upgrade from a 9.x install. I never had this problem on my 9.x install, but since the "upgrade" I experience my desktop freezing. I'm not exactly sure how to troubleshoot this.In looking at /var/log/messages the last entries I see before me having to a hard reboot are:
Code:
Sep 27 19:27:07 gingerk sudo: pam_sm_authenticate: username = [me]
Sep 27 19:27:07 gingerk sudo: pam_sm_authenticate: /home/me is already mounted
Sep 27 20:56:40 gingerk kernel: [102839.046817] operapluginwrap[26712]: segfault at 0 ip (null) sp bf9ce11c error 4 in
[code]....
My manager has asked me to look at memory drop on system while I was doing test on Linux machine. there is a big dip in memory graph produced by another tool. I do not know which processes were responsible for those memory dips. Is there any way I can find memory utilization of process during last week?
View 1 Replies View RelatedI would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedComing from Fedora, I had a Web/Mail/SQL server with 2 hdd's. One (sda1) was the one with Fedora on, and all backups were on sdb1.
Now, I started having issues with SDA1, so I started copying files to SDB1. 2 weeks later I noticed similar issues, and started copying new back files to SDB1. But once I started doing this I lost connection with the server.
Turns out that (in rescue mode) that I couldn't access SDA anymore, it couldn't even read stored data on it, etc. It didn't show up in fdisk anymore either.
So after a lot of trying I asked to replace the disk and started installing Ubuntu 10.04 LTS on it. After having installed everything, I tried to restore one of the MySQL backups that was on the SDB disk, but halfway I started getting errors. I stopped the restore and did some other stuff that I wanted to take care of first (apache2 config etc.).
I then tried to reboot to be sure that that was working as well, and then the problems started. I couldn't access the server anymore, and in rescue mode (which is a live cd my host provides, it's a dedicated server btw.) I didn't see SDB anymore.
I told them this and now after they told me that they managed to get it back, I went into the rescue mode and tried to recover bad blocks with the e2fsck command.
Code:
Trying to restore this bad superblock doesn't work. I've tried for almost all of them:
Code:
e2fsck: Attempt to read block from filesystem resulted in short read while trying to open /dev/sdb1
Could this be a zero-length partition?
What are the chances of TWO hard disks failing? Surely there must be something else wrong? Did a bad driver (which would be weird, since I didn't do any updates like that) screw both of my hard disks up in Fedora?
Also, I must note that when I tried to copy the backups from SDB1 to SDA1 (the new one). I got a read only (??) error, and some other I/O errors.
Just for information, I'll show fstab and mtab as well: /etc/fstab
Code:
Code:
I haven't added the sdb here yet, but it was here in Fedora so that can't be the problem.
And this is /var/log/messages when the problems emerged
Code:
Then on the ubuntu forum they proposed me to do this:
I ran smartctl and it gave me this:
Code:
Code:
I have been using a ARM device with 512MB ram and flash to send messages via Bluetooth to everyone in the proximity. I am doing this with OpenProximity (Python) and it worked for the last week, it did stop for two times but since I didn't have time to find the cause, I just rebooted it (Windows style ) and it worked again, but suddenly it stopped working again last Saturday. When I did /etc/init.d/bluetooth restart it did not say it failed or something, but when I did /etc/init.d/bluetooth status it said "bluetooth is not running ... failed!". This is what I got in the syslog:
Code:
Apr 27 13:52:45 debian bluetoothd[31243]: Bluetooth daemon 4.60
Apr 27 13:52:45 debian bluetoothd[31243]: Starting SDP server
Apr 27 13:52:45 debian bluetoothd[31243]: Starting experimental netlink support
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to find Bluetooth netlink family
Apr 27 13:52:45 debian bluetoothd[31243]: Failed to init netlink plugin
Apr 27 13:52:45 debian bluetoothd[31243]: Can't create GN bridge
[Code]...
You'll probably note that the first message is version 4.60 and the second one 4.63, this is because I tried to upgrade, but that did not work completely, but the error above is the same as first before the upgrade.
Don't know if it matters, but I am using Debian Squeeze and the output of uname -a is: Linux debian 2.6.32.2 #1 PREEMPT Fri Dec 18 22:54:28 MST 2009 armv5tel GNU/Linux. Hope someone know how this could happen suddenly, and even better, knows how to fix it
EDIT: Forgot to say, I am using a SENA Parani UD100 Bluetooth USB Adapter which uses the Toshiba Bluetooth stack.
UPDATE: It won't crash until the Bluetooth stick is inserted, so it should be a driver problem?
been running Lucid & Karmic for a while now, after an update last week (with kernel) & reboot sound no longer works.Results of 'sudo aplay -l':
Code:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC888 Analog [ALC888 Analog]
[code]....
I'd like to tweak my Conky so it automatically displays the days of the week correctly. So for example, if TODAY were Tuesday, it would look like this:
Tuesday
Wednesday
Thursday
Friday
[etc.]
And then tomorrow, *automatically*, it would look like this:
Wednesday
Thursday
Friday
[etc.]
I know I can get it to display *today's* date like this:
${time %A}
But how do I get it to display tomorrow's date?
I've installed osmo , and lots of software from Software Center, but nothing suits me. What I need is a lightweight program, with this capabilities : week and day view, (something like google calendar)advanced repetitive tasks(on week criteria[so I will be able to set a task once in a week, once in two weeks , and so on]) and alarm
View 4 Replies View RelatedUbuntu one does not synchronize files since I upgraded from 9.10 to 10.04. The preferences panel keeps showing "Synchronization in progress...", but files are not downloaded from the repository. It does not show any error message.
Where do I find the programm logs, where I can investigate my problem?