I would like to increase my "/" filesystem, as you can see, it has 81% occupied, and i would like to decrease the capacity of "/home" and pass it to the /Is this possible?
MY-SERVER:#df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda2 3.8G 2.9G 707M 81% /
[code]...
When I try to install anything recently, I was getting errors about "No Space". I noticed that the root drive (/dev/sda1) has 100% usage which I'm not sure how that suddenly happened.
Code:
tom@HouseMedia:/$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda1 9.0G 9.0G 0 100% /
none 1.5G 552K 1.5G 1% /dev
none 1.5G 0 1.5G 0% /dev/shm
none 1.5G 300K 1.5G 1% /var/run
none 1.5G 0 1.5G 0% /var/lock
none 1.5G 0 1.5G 0% /lib/init/rw
/dev/sdb1 294G 182G 97G 66% /mediastorage
There was a powerloss recently and I wondered if some serious corruption had occurred. Since I'm checking the root drive, I had fsck run after a restart:
Code:
sudo shutdown -F -r now
FSCK went to work, briefly, and the logs (/var/logs/checkfs and /var/logs/checkroot) remain empty. Speaking of log files, I had a look at all of them and they take up a mere 32MB, so that's not the issue...
Code:
tom@HouseMedia:/var/log$ ls -h -l
total 32M
drwxr-x--- 2 root adm 4.0K 2011-06-05 06:39 apache2
drwxr-xr-x 2 root root 4.0K 2011-01-20 10:43 apparmor
drwxr-xr-x 2 root root 4.0K 2011-06-01 06:37 apt
-rw-r--r-- 1 root root 0 2011-03-01 06:43 aptitude
-rw-r--r-- 1 root root 851 2011-02-08 10:08 aptitude.1.gz
-rw-r----- 1 syslog adm................
Using Code:
du -h
I know that:
/var uses 1.2 GB
/root uses 100 K
/usr uses 1.4 GB
/tmp is empty
/home has 35 MB
Have already ran apt-get clean. How can I figure out what is taking up so much room? How can I go about figuring out what is huge and is safe to remove?
I am currently running a network with a file server that runs Ubuntu 10.04 Desktop at the moment. DHCP and samba are setup on it for now. Has multiple network cards but we only use the gigabit interface. Here's what I want to do in the near future. I want to provide internet access to the network via ADSL (no better option currently) So what i'll have is one or more ADSL lines and their corresponding modems (most likely D-link ones as they are cheap). As i understand it the server will be doing the job of a router. anyway, point wise here's what i want to be able to do:
1. Have ability to increase capacity/bandwidth with more ADSL line & modem combinations
2. Have user accounts (probably web based setup or any other option) for internet access so that they can be billed per GB.
3. Still be able to share files that are on the local network using local DHCP if possible.
So to an existing network that has files i want to add internet access capability. but users will have to log on so that their usage can be monitored. I have been searching around but maybe the search terms are wrong for what i need accomplished. i don't mind upgrading the ubuntu version to the server edition so long as i can use X11 forwarding atleast so that i can do remote monitoring. VNC is too slow, and using nautilus forwarded via X11 to my desktop sorts out most of my needs. The network provide has suggested maybe using pppoe but i am thinking if there was a welcome page based authentication system then it'd be more easy to monitor?
.I want to increase the /home directory size. How can I do that.I have copied all the files into another directory.
View 7 Replies View RelatedI'm trying to install some updates and I get the following error message:Test Transaction Errors: installing package kernel-2.6.32.10-90.fc12.i686 needs 2MB on the /boot filesystemI have 60 GB freespace altogether. How do I increase the size of the /boot filestem?
View 5 Replies View RelatedMy requirement. We have a linux File server which was connected to SAN (IBM DS4700)now I need to increase my capacity by 50GB I've added the 50GB through the IBM storage manager to the File server, but it doesn't showing on my linux file server
bellow the detail of my drives
/dev/mapper/mpath0p6 1.6G 287M 1.2G 20% /
/dev/mapper/mpath0p7 837M 240M 554M 31% /var
/dev/mapper/mpath0p3 4.1G 2.5G 1.4G 65% /usr
/dev/mapper/mpath0p2 5.1G 1.7G 3.2G 36% /home
/dev/mapper/mpath0p1 200M 24M 166M 13% /boot
tmpfs 2.1G 0 2.1G 0% /dev/shm
/dev/mapper/mpath0p8 356G 303G 36G 90% /filesrv
I need to add the 50GB on to the "mpath0p8".
I have a Lucid Lynx server running with a 6 GB for /home and a data partition of 400 GB mounted inside home (/home/user/data). The data partition is shared through SAMBA for access by other windows machines on the network. However, the capacity of the samba share shows up only as 6 GB (or less) while the actual capacity is 400 GB. I am assuming that this because it is mounted within the home partition. I understand that 400 GB is still available even though the SAMBA drive shows only 6 GB (or less) capacity.
The problem is, I am trying to setup Windows 7 Backup and Restore on one of my laptop. The backup stops with an error that the network drive does not have enough disk space. I think that this is because the samba drive only shows up as 6 GB or less capacity even though it can store more.
How do I fix this problem? How can see the actual size of the SAMBA drive (in my case 400 GB) in stead of the remaining space in /home partition? I know I can reformat my drive and make my /home 400 GB. But I am not sure if this will fix the problem. However, I will prefer to this without formatting.
Can anyone tell me how to increase system file's partition size.I have ext3 type partition where FC11 is installed.Is it possible to increase the size of ext3 without lost of data?
View 2 Replies View RelatedI downloaded ubuntu 10.04 and install it from windows vista (32 Bit) and gave it initial memory 5 GB, but after I started using it I always got a message that I have a very low memory left (16 MB only !!!) and I cannot install any updates or new applications , so is there any way I can expand the File system files without reinstall the OS again????
View 2 Replies View RelatedI'm looking for some advice about how to implement the following functionality in my pet project.
There are two users on my system, user1 and user2. When user1 logs in he can do what he wants etc.. when user2 logs in I want to somehow link the entire file system to another place. In more detail when user2 logs in and does something like ls ~, he should see contents of /home/user1/extra/home/user2/ instead of /home/user2/
and when user2 does ls /usr/bin he should see contents of /home/user1/extra/usr/bin/
Is there a simple way to do this kind of operation. I have looked up the ln command, but I am a little unsure about how to show a completely different file structure to a particular user.
I did play around with ln and found that you can make "soft links" to directories. The problem being how can I link the user2 home directory /home/user2 to something like /home/user1/buffer/home/user2 . can I use something like ln -s /home/user1/buffer/home/user2 /home/user2 .. I guess not. I didn't want to try it as I wasn't sure so as to not hose my system.
whenever I try to download anything I get the error there's not enough space on my home partition; thus I was wondering if anyone would be able to tell me how to increase its size? I'm using ubuntu via vmware workstation.Here is the output of df:
Filesystem 1K-blocks Used Available Use% Mounted on
tmpfs 254964 0 254964 0% /lib/init/rw
varrun 254964 52 254912 1% /var/run
[code]...
how do I increase the size of my home folder in OpenSuse11.3
View 12 Replies View Relatedi just installed ubuntu 9.10 onto my windows vista laptop. i ran ubuntu update manager but it tells me i'm low on disk space. system monitor tells me that i still have 50.2 GB of space but the problem is that i only have 68 MB left in my / File System. how can i increase disk space in / File System?
View 3 Replies View RelatedI am using Slackware 13 x86_4. I have it set so that when I close my lid, it suspends to RAM. When I open my lid, it asks for password, but after I enter it, it freezes. I force KDE down by Ctrl+Alt+Backspace then read the errors. It says:
Code:
xauth: error in locking authority file /home/ridwan/.Xauthority
rm: cannot remove '/home/ridwan/.serverauth.3457': Read-only file system
When I try to startx again, it says
Code:
/usr/bin/startx: line 158: cannot create temp file for here document: Read-only file system
/usr/bin/startx: line 174: cannot create temp file for here document: Read-only file system
/usr/bin/startx: line 174: cannot create temp file for here document: Read-only file system
[code]...
It forces me to power off the laptop by holding down the power button. When I try ctrl+alt+delete, I get an error saying "can't execute from /sbin/shutdown/"
I have created a linux machine in virtual box now i want to add some hard disk space into it.
How would i do this. code...
Can windows read files from a home file server with an ext4 file system? or do I have to partition the drive with the server (ext4) and an ntfs partition with the files on?
View 4 Replies View Relatedi have this directory with multiple images 'pics' and the size is 20mb, and i want to make a .zip or .rar package of this directory but with an increased size so the .zip/.rar file will be 100mb, and then when you extract it the file size is the original 20mb
View 10 Replies View RelatedJust installed Linux (Ubuntu 10.10-net book-i386) on an acer 5310 laptop, everything is working great except for the internet. Google home page takes over a minute to load on Firefox, the actual search results takes only a second but then it takes 2 or 3 minutes to load any site i click on. I have broadband, only 1mb, but it worked perfect on the previous OS, also using Firefox.
View 9 Replies View RelatedI have installed ubuntu on my second hd, the size of is 500 GB.The live Ubuntu cd installation have used only 250 GB, the rest remains as NTFS system. And now I do need more space on my home folder, I would like to convert the 250 GB NTFS to Linux system and add it to my home folder. But I don't know how. I have looked at Disk Utilities, I have not found this possibility.
View 6 Replies View RelatedI need to increase the size of my /home directory. I am working with Ubuntu(2.6.35-22-generic #33-Ubuntu SMP Sun Sep 19 20:34:50 UTC 2010 i686 i686 i386 GNU/Linux
I checked the partitons with df -h command...the output is :
Filesystem Size Used Avail Use% Mounted on
/dev/sda7 11G 4.3G 6.2G 42% /
none 1001M 560K 1000M 1% /dev
none 1006M 188K 1006M 1% /dev/shm
[Code]....
Clearly /usr has loads of space here...and I dont know /home is mounted with which partiton...I read somewhere that tune2fs command could be useful here...I dont want to experiment and mess up here..
i have to upload a signature image(in jpeg format) to fill a recruitment form which says file-size must be of between 10-20 kb......i have scanned image which is of 9.5 kb.....tried to edit in shotwell photo manager....tried some random things in Adjust and crop menu but my little changes didn't work, it always shortened the file size......as i don't know anything about Image editing can someone tell me how can i increase the file size (>=10kb) i also tried gnome-screenshot to take the screenshot of the image, but it also saved the new image smaller than 10kb....
View 6 Replies View RelatedI'm interesting in knowing what processes could be altered to improve performance and functionality on my system. And which process may be the best one to alter
View 2 Replies View RelatedRecently upgraded to F12. K3B can't burn DVDs. Drive was working fine in Fedora 10 before the upgrade, and I've applied all updates.
Here is the output when run from console:
Code:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/SlowCoder/.gvfs
Output information may be incomplete.
(K3bDevice::HalConnection) unlock queued for /org/freedesktop/Hal/devices/storage_model_DVD__RW_GA10N
First sec data area: 43:41:33 (LBA 196608) (402653184
[code]....
Can't log into my XFCE desktop like I normaly do. all the sudden I get notified that my xsession lasted less then 10 secondsLooking at the error I can see this:
Unable to access file /home/username/.iceauthority: No such file or directory
Using failsafe I can start a terminal. From terminal I tried to start X
Code: sudo startx Result: Running on desplay:0
So I tried to run this;
Code: sudo startxfce4 And I get up a graphical desktop.
So this is not a critical situation as I easily can use this method to log on, but as there has been something causing this I would like to be able to resolve this nonetheless. Btw it is not the old chmod trick in play here, cause my .iceauthority file is gone alltogheter.
What is the maximum amount of ddr that can be installed in a 64 bit ubuntu linux system computer?
View 1 Replies View RelatedMy specs: Debian Lenny i686, 7gb ram, 1tb hdd, Pentium 4 2.2 the rest not important.
Now, i did clean install of Debian on to my 1tb hdd as such:
- 14 gb swap (as far as I understood it has to be twice as ram)
- / root 25 gb
- /home the rest
I don`t know if it`s important, but I am under Gnome+Compiz+Emerald.
So the first question is: There is a program in: Applications/SystemTools/Disk Usage Analyzer It tells me thisScreenshot-Disk Usage Analyzer.png
Correct me if I am not right, but i am running out of disk space on /home?
Currently, I have on internal HDD 160GB in size. 20GB are for windows XP partition and the rest is assigned for ubuntu partition(s?). i want to make it now more equal in size, but how can i do that? I'm using ubuntu 11.04...
View 3 Replies View RelatedI'm currently switching to a new laptop that will be my main machine and currently I use a laptop and a desktop on a daily basis. The laptop will continue to be used by another member of my family but the desktop will no longer have any use (well I might later build a new desktop but this one has finished his service).
The machine in question has:
AMD Athlon 64 3800+ @ 2.4GHz
4x512MB DDR-400 (2GB Total)
Seagate 200GB SATA 7200RPM 8MB Cache Hard Drive
Geforce 6600GT 256MB GDDR3
Since I will no longer use it as a desktop/working machine I'd like to set it up as a home server. However I can't decide which OS to use for that. I have access to all Windows Versions since XP/2003 (with the exception of Windows Home Server) and I have some knowledge using both Windows and Linux so that's not a problem on my choice.
[Code]...
At home - Ubuntu, running vnc, dhcp,
At work - windows 7, running vnc, dhcp.
How would I be able to access a home ubuntu workstation from my work's laptop ?
Any ideas on what is the best set up ?
I am operating Debian 5.0 kernel 2.26. In trying to clean up (I believe I was using a root terminal), I erased the directory /home/root. Since I have done that, I can not get to a root terminal, can not use synapse and a host of other administrative processed.
Now, when I boot the system, I can log in as a user (my version of Debian does not allow me to login as the administrator). Then, logged in as the user, I previously could select for example 'synapse', I would be given a screen to enter the Administrator password and then get synapse. Now, I am given the screen to enter the Administrator password, but once I enter it, I do not get synapse. I do get an error message
'can not find /home/root/.synapse' And of course, I erased the /home/root directory. Now I might just mkdir /home/root - except to do that I need a root terminal and I can not get that either - probably for the same reason.
I have tried using the boot disk and going to the rescue mode - except for some reason I can not mount a root directory. I believe it is because I am using LVM2 and my root directory must be in an LVM volume, but I can not figure out how to get to that using the rescue mode.