General :: Gnome-panel In Fluxbox - Performance Degrades?
Nov 28, 2010
I'm toying around with fluxbox and like it's speed and simplicity. However, the gnome-panel is great and I would like to use it in fluxbox. Specifically, I like its system monitor, typing break, gnubiff and clock (which world clock support). My question is: if I'm running the gnome-panel in fluxbox will this degrade performance, for example, since the gnome-panel needs to load all the gnome related libraries etc.? One of the main reasons I'm looking into fluxbox is for speed so I don't want to lose that just because of the panel.
View 14 Replies
ADVERTISEMENT
Oct 18, 2010
I upgraded my old Kubuntu installation to 10.10 Maverick Meercat and I am now experiencing a really annoying problem. I boot my computer and everything seems fine for a while, but eventually my disk performance drops to horrible levels. It's not gradual. It's fine one second and then abysmal the next.
If I do "cp file1 file2" and then kill the cp process after 10s, there are only a couple of MB copied.When I run dmesg after the performance degradation, I see this:
Code:
[12879.434115] irq 22: nobody cared (try booting with the "irqpoll" option)
[12879.434121] Pid: 0, comm: swapper Tainted: P 2.6.35-22-generic #34-Ubuntu
[12879.434124] Call Trace:
[12879.434126] <IRQ> [<ffffffff810cba5b>] __report_bad_irq+0x2b/0xa0
[12879.434137] [<ffffffff810cbc5c>] note_interrupt+0x18c/0x1d0
[Code]...
View 3 Replies
View Related
Dec 17, 2010
I need the steps to troubleshoot this:
If I:
1. Add drawer(s) on the gnome panel
2. add items to one or more of those drawers
3. reboot then:
1. all empty drawers can operate normally
2. drawers that have stuff in it cannot be opened.
View 2 Replies
View Related
Jun 8, 2010
I just installed fluxbox recently I'm trying to install some new themes and stuff. The problem is: When I change my gtk theme is changes it on GNOME as well. Is it possible to stop this from happening at alll?
View 2 Replies
View Related
Jul 29, 2010
Is it possible to install Gnome-panel in Xfce? I'd like to completely replace xfce-panel with gnome-panel. It is possible the other way round so maybe this way too?
[url]
I tried xfce4-XfApplet-plugin but it doesn't work the way I would like to.
View 4 Replies
View Related
May 15, 2011
I just recently upgraded to Natty and I'm having a fairly annoying issue with Gnome and Fluxbox. There will be random intervals where I'll hit the enter key and my desktop environment will just quit out without any warning. Now this is becoming a huge nuisance because I use time tracking software for work and I essentially lose time because once the environment crashes, the time is not saved.
View 9 Replies
View Related
May 17, 2011
So I just updated my IdeaPad to Natty and played around with Unity. The performane was absolutely unbearable so I installed Unity2D from the software center. Now when I start the session everything seems to be fine at first. Whenever I move the mouse over the panel though it seems to switch to my old gnome-panel from the "Classic" session (with some missing icons). When I move the mouse over that panel again it switches back to the Unity panel style. What is going on? Can I fix this somehow? I will have to use the classic session until I get a working consistent behavior
View 3 Replies
View Related
Dec 4, 2010
Regarding the gnome-panel in Ubuntu (64 bit).... I discovered some time ago that I wasn't the only one who routinely (every login) had their gnome-panel appear butchered, for which Alt-F2 then 'killall gnome-panel' would easily fix.
Having become impatient with this over the past 8 months, I decided I would automate the process and so cofiguring the startup applications seemed like a perfectly logical choice to me. Turns out I was wrong. After adding 'killall gnome-panel' to the startup applications not only does the panel fail to load altogether now, but Alt-F2 doesn't even work.
I tried Ctl-Alt-F1 and working with the graphics-free mode thinking I could somehow navigate to the startup apps config file and edit it, but I don't know where it is or how to edit it without logging in as root and I certainly don't know of any 'root password'.
View 9 Replies
View Related
Oct 18, 2010
How I can set that my left panel fit the top edge of the screen (instead of top panel)?
View 6 Replies
View Related
Nov 13, 2010
The last 1 weeks or 2, moving around in the gnome panel has slowed a lot. What was a 1 second delay switching from workspace 1 to workspace 2 now takes 30 seconds. Inside the applications like gnome terminal processing is fast, Thunderbird and Firefox do seem to have slowed but Kate, Kaffeine work fine. Dragging and dropping into workspaces takes 15-30seconds but by using the drop down box the speed is normal. This machine is running OpenSuse 11.2, Gnome Desktop 2.28.2, Amd 64 3000+, 2Gb RAM,
View 5 Replies
View Related
Jul 24, 2009
Does any one know how to get the name back on the gnome panel. It seems to have disappeared , I tried using the add to panel feature by right clicking on the panel but cannot locate it in the list.
View 5 Replies
View Related
May 25, 2010
I use alsa, and I don't have a volume control applet on my Gnome Panel.When I right click and select "add to panel", there is nothing that has to do with "sound", "audio" or "volume" in the list, and the "Indicator Applet" or "Indicator Applet Session" things have no volume controls, or properties that would let you enable any sort of volume control.
How can I get a volume control in Ubuntu, so I don't have to run aumix in a terminal or something? I've got the thing working now. But does anyone know why the new, fancy "Indicator Applet" volume control doesn't appear? The Gnome Volume Control Applet isn't as nicely featured, although it actually works.
I've been using Linux since Redhat 5, it's beyond me why these sorts of problems are still around. Someone should just put a damn "Volume Control" element in the list of things to add to the panel, even if it doesn't work, perhaps showing an error message.
View 5 Replies
View Related
May 20, 2011
Is it possible to run the GNOME session manager but not have a window manager? It would also be nice to have a panel (or at least a status notification area) that was in a window, rather than a title-bar less menu bar.
The reason I want this is that I'm using my Mac's X server and logging into a VM running Fedora on the same host. And I've noticed some things, like the ability to use USB tethering, depend on a D-Bus session being active, and possibly the NetworkManager widget in the panel.
From IRC - #gnome:<borschty> ok, then go to gconf-editor somewhere under /desktop/session there should be something like "required_components" and remove window-manager from that list. You could use something like wmctrl to change the window-type of the panel, but a) that might break stuff and b)
View 1 Replies
View Related
Feb 17, 2011
Do you know the GNOME Panel applet that is terminating running applications after clicking on them with the cursor and confirming the action with a Yes/No dialogue?I know about xkill, but it is not satisfying due to it has not confirmation dialogue.Instead, I would like to use xprop and kill and zenity
View 5 Replies
View Related
Nov 12, 2010
Seeing this on two systems that went through F13-F14 upgrade.
version: gnome-applets-2.32.0-1.fc14.x86_64
symptom: via right click on a gnome panel, perform "add to panel" and choose Dwell Click.
Gnome panel bites the dust with SIGSEGV at this point, restarts, and then you've got dwell click on the panel.
Anyone else seeing this, and better yet, have a solution?
View 1 Replies
View Related
Mar 2, 2010
How do I delete Gnome-panel only without deleting gnome?
View 1 Replies
View Related
May 12, 2010
I've installed Ubuntu 10.4 and the gnome-panel appears half, as you can see in the attached picture, if I try resolutions over 1024x768.If I kill the gnome-panel and it restarts, or if I change its properties, it became OK, but in startup it appears like the image.I've tried other Gnome 2.3 based distributions and occurs the same issue. With Gnome 2.28 it doesn't occurs. Then ii seems a gnome 2.3 problem.
PD: My grafic card is a Matrox G550.
View 6 Replies
View Related
Nov 3, 2010
I have Ubuntu 10.10 on e-machine T-1221 I can shut down the machine using :
sudo shutdown -h from terminal
I can shutdown using powerbutton on case. I can't use the applet indicator powerbutton in root account, but, I can use the command under "System-->-Shutdown" in root account, but I don't see "System-->-Shutdown" in users account. Is there a way to add it ? I installed Debian 6.0 Squeeze on my Acer Aspire 3620 Laptop it works just fine and has the same Gnome Desktop. The only thing different is that there is no powerbutton available thru Gnome applets, only the command on menu under" Sytem-->-Shutdown", which I'm fine with on this machine.
These are the things I tried on emachine T-1221
I tried "acpi=force"
I tried "noacpi"
I tried "noacpi nolapic"
I read the bug reports it stated that on live-cd there was only suspend and hibernate. There is no shutdown or reboot. I tried: "#start acpi", it closed with errors. It said that Ubuntu uses upstart. Is there a script which you can add to power button to add the shutdown.? Really I don't necessarily need powerbutton, I think the work around would be adding the command to "System-->-Menu.
View 3 Replies
View Related
Sep 1, 2011
I am running a ubuntu desktop machine as a server and use VNC from my windows machine to login via a LAN to the ubuntu machine. The login session is very sluggish and frustrating. I installed gnome-rdp to see if it would be better but I don't know how it works or what to do and if there is something else I can do to improve the performance. I have 3 gig of ram and the server is a dual celeron machine
View 9 Replies
View Related
Aug 16, 2010
I have a very simple question concerning gnome-do. I have configured to search for folders and files, starting from my home directory and going deep up to 20 directories.
The program gives me a message that it is indexing too many files, I guess it is giving up? it basically do not find some of the files/folders I try. the version is 0.8.2 for ubuntu 9.10
View 8 Replies
View Related
Aug 3, 2011
I am trying to get rid of the gnome panel shadow in ubuntu 11.04(classic, not using unity). I know that I can get rid of it using compiz but I do not want to use that. I suppose my question would be, where is the "panel-shadow.png" file located that I can edit and make transparent? I found it before but cannot for the life of me now.
View 9 Replies
View Related
May 31, 2011
OR IS IT A FEATURE?
I've managed to ALT-RIGHT-click-add some launchers to the top gnome-panel. When i now click on a launcher the gnome-panel crashes(?) and reappeares, but the program starts without problems. If i do this two times in a row (1 sec diff or so) the gnome-crash screen appears and i've got to log out although all the programs are still running without any problems.
dmesg shows this: [14460.034820] gnome-panel[4428]: segfault at 18 ip 0000003810fc05df sp 00007fffcaae4c30 error 4 in libgtk-3.so.0.0.10[3810e00000+3fb000]
View 1 Replies
View Related
May 18, 2010
Gnome 2.30.0 (Ubuntu 10.04) I wish to create a launcher to a particular subdirectory.- right click on Panel and select Add to Panel- choose Custom Application Launcher- Set Type to Location- input desired NameNext to the Location text box is a Browse... button. I would expect to be able to browse to the subdirectory which I wish to access with my launcher. However, the Browse... button brings up a window which is titled "Choose a file..." and which will only "Open" a file, not a subdirectory.Is this a bug I should report or just an example of poor user interface design? If the latter, is the issue with the Create Launcher program (for bringing up a file locater) or with the File Locater program (which should have the option of selecting a location as well as a file?
View 5 Replies
View Related
Apr 26, 2011
My problem is the links that are in the places menu in the gnome panal, all link to the appearances preferances. I'm running Fedora 14 with Gnome.
View 1 Replies
View Related
Mar 12, 2011
In ~/.xinitrc I have option:xset -dpmsI also read this page about screensavers and found that I didn't install any of those programs for blanking the screen.But after some idle time Fluxbox turns on the blank screen. Why? How to disable it?
View 2 Replies
View Related
May 2, 2011
i have fluxbox as my desktop manager but i want kde instead so i installed it and i don't know how to switch over to kde. will i have to remove fluxbox??
View 4 Replies
View Related
May 18, 2011
I have been hearing some cool things about window managers like fluxbox and I was wondering what the best distro is to put it on? Is fluxbox the best window manager to use?
View 9 Replies
View Related
Nov 19, 2010
I recently bought a second monitor and I had this set up perfectly fine with two panels on my primary display and one on my secondary. I've now gone away for the weekend (leaving the monitor) and I went to turn on my laptop and it didn't work.
When I login to a gnome session (or indeed a failsafe gnome session) I just got two horizontal white bars (where the panels would be). I switch to a terminal, login and run top and see that gnome-panel is on 100%. Running 'killall gnome-panel' does nothing (tried a few times).
I've had to install xfce4 just to type this message. Is there any way I can 'reset' gnome-panel or any other fix? Or even a workaround would be nice. I'm on 9.10 by the way. I am going to upgrade at some point but its not really an option yet.
View 3 Replies
View Related
Jul 31, 2010
I just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies
View Related
May 7, 2010
I am placing apps into my fluxbox startup file as per the instructions, however nothing starts up except fluxbox.It doesn't matter what app I try, so it isn't an app problem.
here is my startup file:
#!/bin/sh
#
# fluxbox startup-script:
[code]...
I have also tried tests such as "touch ~/testwoked" and such, nothing works.It makes no difference if the file is executable or not.
View 1 Replies
View Related
