Ubuntu Networking :: BT Internet Connection Not Working Wired / Wirless - Fix This?
May 7, 2011
Ever since my BT Hub 2 has updated a few weeks ago I'm unable to connect to the internet either wireless or wired. I duel boot on my netbook with xp and duel boot my desktop PC with windows 7. None of the Ubuntu�s are able to connect, I have no problems with the windows side of things.
Has anyone any ideas on how to fix this until BT decide to fix the problem. Preferably a step to step guide as I have limited experience with Ubuntu. I�m using Ubuntu 11.04.
View 3 Replies
ADVERTISEMENT
Apr 30, 2010
i'm really frustrated with ubuntu the last little while. i thought things would be better but its hard to stay optimistic when nothing works. My wife's laptop an MSI A6000-029US has an nVidia chipset [MCP79 (rev b1) according to lspci in lucid].i expected the RaLink RT3090 not to work out of box.. but the Ethernet controller for the wired connection doesn't work either.i can't get this thing online to update it. the syslog says:
Code:
Apr 30 04:13:39 msilappy NetworkManager: <info> (eth0): carrier now ON (device state 2)
Apr 30 04:13:39 msilappy NetworkManager: <info> (eth0): device state change: 2 -> 3 (reason 40)
Apr 30 04:13:39 msilappy kernel: [ 402.001626] eth0: link up.
[Code]...
View 1 Replies
View Related
Jan 31, 2010
After installing UNR onto my dell mini 9 and downloading the correct drivers to enable wireless internet (using this site: [URL]), I decided to load ubuntu onto my brothers netbook. After the installation completed, I went to do complete the steps listed in the above article, however I was unable to connect to the internet using an ethernet wire.
View 9 Replies
View Related
Jun 1, 2010
When I unplug the ethernet cable from this laptop and plug into my Ubuntu 9.10 Desktop I get a wired connection automatically but I have no internet connection in Mozilla
View 9 Replies
View Related
Jun 2, 2010
I have BIG troubles trying to set up wired internet connection in Ubuntu! To be able to connect to the internet I have to enter my MAC address, 2 IPs, netmask and 2 DNS address. When I try to edit the default internet connection eth0 with my correct information, the minute I enter my MAC address and save the changes the network manager creates new internet connection with wrong data and use it instead! I can't select the correct internet connection from the top bar where the internet icon is, because it is just not there. The only connection that I can choice is the new default one with the wrong data! If I try to create new separate internet connection with my correct data the same thing happens! The moment I enter my MAC address and save it, the internet connection disapears from the list of internet connections in the internet area in the top bar and I can't select it. I tried googling it, but with no luck I think that if I set up my connection trough the terminal everything will be ok
View 2 Replies
View Related
Aug 14, 2010
I have had the exact same set up 10.04 on the same machine connecting to the net with no problems. I had upgraded from an earlier version.
This time with a fresh install from disk the network manager does not see any connections. How can I get the manager to recognise the network and connect to the net?
I realise that it would help if I posted up the output of some commands in a terminal but I am writing this on my phone and can not cut and paste large chunks of text. I can only hope for some advice until I can get to a computer with a working connection.
Ubuntu 10.04 AMD dual core 64 bit with wired 10 meg broadband.
How can I get the network manager to see the connection
How can I find the MAC address?
View 9 Replies
View Related
Aug 17, 2010
I've installed Ubuntu 10.04 on my classmate's Lapie after he got frustrated with Windows 7
Everything is fine except LAN connection wired one...
Can anyone tell me how to confiure that..& from where ?Like his IP addressis 192.168.68.10 with subnetmask 255.255.255.0
Plz guide me for this...Bcz many of my fellow hostelmates are for Ubuntu if I configure it out.
View 5 Replies
View Related
Sep 18, 2010
I have an old Compaq Presario v2000 that recently had Ubuntu 10.04 installed on it. The wired internet worked when it was installed, but the wireless didn't. I tried to download the drivers for it and it failed everytime. I did an update thinking that the update might fix the wireless, but it didn't, it actually made my wired connection stop working. So now I have a newly installed OS on the laptop, and I can't do anything on it because there is no way to get any internet.
View 1 Replies
View Related
Nov 4, 2010
I've just installed the 64 bit 10.04 onto my new netbook, with ample specs to run the full desktop version rather than the stripped down netbook version. My only problem (at the moment) is that my wired internet connection is not recognized within the operating system, yet while I was downloading/installing Ubuntu it had no problem finding and using the connection then. When I boot into Windows 7 or plug the ethernet cable into my Mac, the connection is established immediately, and no need for manual entering of anything because everything is auto-detected. The really strange thing is I've run Ubuntu off a USB stick and when booting off that the wired connection was immediately recognized after startup.
View 5 Replies
View Related
Jul 23, 2011
I have an ibm think pad and for some reason the internet(firefox) stop working and i don't know why , the netwprl settings have disappeared or anything on fixing it , yes i have tried restarting the modem but that hasn't work ethier Also i don't really know where the re-start disk so is there anyway i can fix it with out the disk?
View 4 Replies
View Related
Jul 18, 2011
I can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
View 9 Replies
View Related
Jun 21, 2010
I have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies
View Related
Mar 3, 2010
I have just installed a fresh copy of 9.10 on an older Compaq nc6000 laptop. I need some help getting my Linksys WUSB600N wireless adapter to function properly.
I have "half-way" connectivity, meaning that I can see (and connect to) my home wireless network but I can't connect to the internet (unless I use the wired connection). I have installed NDIS wrapper - no change
View 9 Replies
View Related
Aug 29, 2010
For the last 3 or so hours I have been trying in vain to simply give my mobile phone wifi internet access from my netbook. I have tried to google and follow some howto's and guides, but they're either too old or don't explain it very well. I'm fairly new to use of Linux and of wireless networks, but can handle setting them up in Windows. So basically, having said that, I believe I mostly understand how this whole thing is supposed to work theoretically but I just feel as though I lack the experience to jump the wireless hurdle AND the Linux hurdle at the same time. I have provided some information below.
- Setup is based on Lucid netbook remix install with a Maverick kernel update due to lack of driver support for wireless NIC - I can confirm wireless does work properly for connection purposes
- I followed [URL] and kind of followed [URL however I couldn't even tell how to run Network Manager, even though Synaptic tells me it is installed
- When I ran into problems trying to install ipmasq I found [URL] and followed what the response told me to which allowed me to restart the dnsmasq and the dhcp3-server at least
- I have restarted the entire netbook several times throughout the process.
View 8 Replies
View Related
Mar 28, 2011
Okay, a couple of weeks ago I was running 10.04, got an auto update that needed a firefox restart, so rather than restart, I just shutdown the computer for the weekend. When I booted the computer on Monday it would find sites (www.google.com, start.ubuntu.com) but it wouldn't download the necessary items to load the page. Now I have a windows laptop sitting next to the ubuntu box and it was online with no issues, so I know it wasn't the connection itself. So I decided that the update messed up the system so I downloaded 10.10 and installed that and ran that all last week.
On Friday I got a system update that required a firefox restart, so I ran firefox for the day and decided that since it was friday, I would just shutdown the computer and reboot on Monday.Well now Monday is here and now I again have sloooowww internet, to the point that URL.. times out and won't come up. I have tried doing a traceroute on both machines and the windows box gets all the way to www.google.com, but the ubuntu box gets about halfway there and then gets no response. I am at a loss, I don't want to reinstall every week. I did try to reboot and run the previous version of 10.10 that shows in the boot menu, but that does the same thing. One thing I did notice is that the broadcast ip is different than the machine IP, don't know enough to know if this is a problem.
View 8 Replies
View Related
May 1, 2011
I cant get my wired internet connection to work. The command 'dpkg -s pppoeconf' returns ' installed ok installed'. My connection is through a router which is probably in a semi-bridge mode and I need to dial a connection to get the net started. The connection Auto eth0 is setup properly with the correct cloned MAC Address (that of my laptop).
I've also executed 'sudo pppoeconf' and ran the whole series of steps which towards the end said that my connection will be set on boot. However, the net doesnt work directly and I dont know how to dial manually either. 'sudo ifup eth0' returns 'interface eth0 already configured'. I tried some 10-15 threads but none worked. Ubuntu is handicapped without internet.
View 2 Replies
View Related
Jul 24, 2011
I have two laptops (Dell & Lenovo), both have wifi.
I am having one wired Ethernet connection.
I want to share this Internet connection among two system , to access Internet from both the system.
I had tried by creating a wireless network, but was not able to do so.
View 3 Replies
View Related
Jun 1, 2011
I just installed Ubuntu 11.04 desktop on my desktop in dual boot with Windows 7.
Heres my problem, I am unable to connect to the Internet even though my wired Ethernet connection says it is connected normally. The wierd thing about this is that I also have a wireless card in my desktop and when I connect through that I am able to connect to the Internet. I am connecting to a router that is functioning as a repeater to my main router/cable modem. I have tried to solve this myself but am having no luck. Ironically, earlier today suddenly my ethernet connection worked for a few minutes without me modifying anything.
The output of some terminal commands are below.
Quote:
Quote:
Quote:
However a pint to that ip address (my router) is successful.
Quote:
Hosts.allow and hosts.deny are both fine (not blank but no entries)
View 1 Replies
View Related
Nov 1, 2010
I have a wired problem in Ubuntu 10.10, My Ubuntu can connect with Wireless network, however it cannot connect to Wired Connection. I installed dual System, one is Ubuntu 10.10, the other one is Win7. Under Win7, I can both connect to the Internet in Wired or Wireless mode.
The more wired phenomenon is: When I plug in the cable, I can see the icon connected in my network manager. But I cannot visit any URLs. By checking the "ifconfig -a", I can see the IP addr was assigned to my eth0.
View 2 Replies
View Related
Dec 4, 2010
installed Ubuntu 10.04 on my Dell 1564. My cabled netwo connection is not working.buntu has been dual booted with Windows 7. Internet connection on Windows is working. I have an ADSL modem connected to my laptop via the cable.I have given the details of commands asked to be execute(viewed various posts).
isr@ISR:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12)
[code]...
View 1 Replies
View Related
Jan 7, 2011
Running a wired connection through a Linksys router that suddenly stopped working today.I thought this was a ipv6 issue sinced I enabled some of those settings to share a connection with my PS3.I have since disabled IPv6 in Firefox and through the grub. The RealTek adapter will not even show a connection through the network manager when connected.The onboard adapter will show a connection, give me a ip address and MAC but still will not load the internet. I've tried uninstalling and reinstalling both adapters through the network connections, as well as reinstalling Firefox to no avail.I've also tried using Open DNS servers.I cannot ping through the network tools either. Hard for me to paste a ifconfig since I'm on my laptop.I'm running Ubuntu 10.10 (not dual booting).I did some updates this morning but it worked fine for a little while after that, until I tried to connect to my PS3.
View 3 Replies
View Related
Sep 1, 2011
I recently installed 11.04 on my PC (was running 9.04), and beforehand "tried it out" and networking was fine. I could access the internet no problem.I then ran the install, and fully formatted my HDD (i have 1 HDD for the OS and another for storage)It crashed halfway thorough, so no problem, i just re-formatted the hardrive and installed.However, It didnt connect to the internet, I literally tried every single forum looking for the solution, including editing the Network interface file.After a bit of diggingfound my user privileges did not allow me to connect to ethernet, and randomly use audio devices.SO, no problem I checked the boxes, but it still wont connect to the ethernet now, and it was fine before, tried re-installing twice with full format, but still doesnt work.
View 9 Replies
View Related
Jan 11, 2010
I recently installed Ubuntu 9.10 on my Dell Inspiron 1545 64-bit laptop. Before that I used Windows7. In Windows, the internet connection worked perfectly well. But after installing Ubuntu, I am unable to connect to the internet. The network-manager applet finally says that "You are disconnected". When I do the "ifconfig", I got no IP address.
So, I installed Ubuntu 9.04 in the same system. But the problem persists.
I gone through many posts in this forum but nothing was useful.
View 9 Replies
View Related
Jan 14, 2010
As of now, my internet works fine when connected with an ethernet cable.The problem is it doesnt seem like my wireless is working at all.The led light is orange, (its usually blue when it connects) and I cannot see my home dsl network.Is thereany specific troubleshooting steps I should take?HP dv6000 laptopwireless card: Broadcom Corporation BCM4311 802.11b/g WLAN
View 6 Replies
View Related
Mar 29, 2011
Machine brand: Acer 5253-BZ893 laptop
Ethernet controller: Atheros communication device 1083
Network controller: Broadcom Corp. Device 4357
iwconfig: no wireless extensions
network config: *-network UNCLAIMED
iwlist scan: Interface doesn't support scanning
Ubuntu release: 10.04.2
uname -mr: 2.6.32-28-generic x86_64
I have not been able to get an internet connection wired or wireless on my laptop. I downloaded the drivers from Acer's website and tried installing them using ndiswrapper. Still no luck.
View 3 Replies
View Related
Jan 16, 2011
I just want to use Internet Connection Sharing (ICS) to connect to the internet. I have done a massive amount of troubleshooting, but some of it seems to contradict itself, and the only two things that I know for sure are that it used to work, and that my Ethernet cable is not the problem. When I use Terminal utilities like ifup and dhclient it seems that it can not determine IP information, but when I try to put it in manually, the "Apply" button grays out right after I finish typing it in. When I try to connect normally, in KDE or GNOME, the icon acts like it's connecting, then instead of having the connected icon, I receive a notification that "the network has been disconnected", and it goes back to the disconnected icon.
Oh, and by the way, I know that I could probably find a workaround, but I have limited resources, and this used to work. The Linux is a Dell desktop with Fedora 12 and the Windows is a Windows 7 HP laptop.EDIT: I hope that I didn't mess something up, but I accidentally used system-network-config to try putting in the IP address there, and ended up changing it back to the original settings, but the computer is now calling it Auto Ethernet in the taskbar icon, although sudo iwconfig in the terminal still calls it eth0.
View 7 Replies
View Related
Jul 3, 2011
newly installed fedora 15 is not able to connect to internet i have broadband connection with wireless modem my laptop is connecting to wireless modem network. but i am not able to configure pppoe connection on it PS: i am able to connect to internet when using wired connection from modem
View 2 Replies
View Related
Jun 13, 2010
how to make dsl setup and to acess both wireless and wired at a time.
View 2 Replies
View Related
Apr 30, 2011
For upgrade-check I used today Ubuntu 11.04 X64 LiveCD om my Sony Viao VPCF13Z1E Laptop to check if all my hardware can be used with Ubuntu 11.04. When Ubuntu 11.04 X64 LiveCD was started I could connect to my network with my wireless network adapter. But when I tried to browse with Firefox I could not get a connection. A ping to my router or to an other machine did neither work. To browse the internet with Firefox and a wired connection works normally. When I use Ubuntu 10.10 X64 on my laptop the wirelss connection works normally.
The command lspci | grep -ni network on my Sony laptop responds with: 23:02:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35) I use a wireless connection based on wpa/wpa2
Connection information from Ubuntu 10.10 X64:
Interface 802.11 WiFi (wlan0)
Driver iwlagn
Does anyone have an idea how to solve this problem? Or do I have to report a bug?
View 2 Replies
View Related
May 4, 2010
I recently did a fresh install of 10.04 from 9.04 and since then I am unable to use Internet. However my ethernet connection is working fine, as I am able to login to modem and check configuration. I reinstalled twice, downloaded fresh 64-bit & 32-bit and also followed kernel update steps as in few forum posts, but no joy. The firefox is throwing an error "The connection has timed out". My internet connection is working fine as I am able to use my Windows Laptop to post this message. I checked system > administration > hardware drivers and couldn't find any unsupported hardwares.I had similar issue when upgrading to 9.10, hence stayed on 9.04. When I looked at LTS image, I couldn't resist and cleaned up 9.04.
View 5 Replies
View Related
