I need to make some changes to a bash script for my internship, and since I just started reading up on bash today, I'm having a hard time understanding what this would mean.
node="\\$1"
echo $node`echo $2|sed 's///\\/g'`
I currently have 3 files with floating point data that I wish to have in a single file with the format:
Code:
F1 F1 F3 Output
a1 b1 c1 a1 b1 c1
a2 b2 c2 a2 b2 c2
a3 b3 c3 a3 b3 c3
a4 b4 c4 a4 b4 c4
When I run for i in $(find -name '*.ogg'); do echo '$i'; done I don't get one line per file as I expected. Instead, when a file name has a space in it, each word comes out in a separate line, so I can't run commands on the files.
View 4 Replies View RelatedI would like to append text to a file. so i wrote in bashecho text >> file.confHowever it doesnt leave a new line. So i can only do this once. How do i add a new line?
View 2 Replies View RelatedI am looking for a way to delete the currently entered commandline without wasting seconds on the "Backspace"-key.
For example I scrolled the bash history and have a long commandline that would execute when I pressed ENTER:
~$ aptitude search openssl | grep dev
But now I decide that I do not want to execute this command. Can I get an empty prompt fast without deleting the whole line with Backspace? On the Windows "cmd" you can just press ESCAPE and it is gone. This behavior would be what I want.
The question may seem trivial but this is bothering me for a long time now.
I am looking at how to add particular text to a file in bash.Here is what I am trying to do:In the /etc/grub.conf file, I am trying to add "audit=1" (without the quotes) to the end of the kernel line...such as:kernel /vmlinuz-2.6.18-194.el5 ro root=LABEL=/1 rhgb quiet audit=1
As there are a few different lines in this file, I am only looking to add the "audit=1" to the above line via a bash script.
I have a lot a folders, each named by a number, and in each of these folders I have a specific file (stddev.dat) containing a single line (of numbers) I need to have a single file with each line being one of the stddev.dat (no matter if it is sorted or not), and also I need to add at the begining of each line the number of the folder it comes from.
I 'm no bash expert, and the "add at the begining of the line" is a bit of problem to me". Here is what I've come up with so far, just to put everything in one file, (and also if you know a better/more elegant way to do the same thing I've done, I'm listening)
[Code]...
I just installed ubuntu today, and it asked me to install over 200 security updates. When I finished that, it asked me to restart the computer so that the updates will take effect. After Dell (it's a Dell computer) booted, I got a message reading:
"Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else, TAB lists possible device or file completions."
I would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 3 Replies View Relatedbash 3.1.17(2) I'm trying do write a shell script which must operate on each line of an ASCII text file. So, all the code must be inside a loop, and inside the loop, the first thing should be to read the next line from the file. I have the bash read command. But it reads from stdin. Any way to make read from a file?
View 6 Replies View RelatedI have a set of files containing data that I need to re-arrange into one single property list.
The files that I have look like this:
Code:
# cat uk
<string>10</string>
<string>11</string>
...
<string>29</string>
[Code]....
So the lines in the files match up but I haven't found a way of reading several files line by line.
I'm trying to make another file annotation script a little speedier than it has been by the up-until-now proven method of checking the last four characters in a filename before the "dot" (eg .jpg, .psd) against a list of known IPTC categories and Exiv2 command files. It occurred to me that if one script generated a list of files in directory foo, and the same or another script sorted that list by that four-letter tag,then that list could be used(instead of a for/do/done loop on the real files in the folder) by the command-file-matching script to "vomit out" which annotator file would go with file nastynewfile.jpg, f'r'instance. The script I had been using for this task looks like this:
Code:
while read 'line';
do
sp=$(echo $line)
vc=$(echo $sp | cut -d"," -f1)
cv=$(echo $sp | cut -d"," -f2)
[code]....
Where I seem to be stuck is with how to sort the lines in templist, which may be any number of different lengths, from back to front. sort -k looked promising, except it seems only to work the other way round. I thought of invoking a
Code:
q=$(expr length $line); echo $q
n=$[q-8]; echo $n
kind of thing, but that presented the problems of how to sort by those, how to tell sort where to find them (grep?) and how to "stitch them back in" to the original list, which is what I want to sort in the first place.
I have a wrapper script called MAIN.sh that runs several other script. It looks like this:
Code:
#! /bin/sh
script1.sh
[code]...
I have a text file (myfile.txt) with columns a,b,c.
123 2 23
124 2 24
125 2 22
[code]...
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program(there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]".Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.?
(Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
I've written myself a linux program "program" that does something with a regular expression. I want to call the program in the bash shell and pass that regular expression as a command line argument to the program (there are also other command line arguments). A typical regular expression looks like "[abc]_[x|y]". Unfortunately the characters [, ], and | are special characters in bash. Thus, calling "program [abc]_[x|y] anotheragument" doesn't work. Is there a way to pass the expression by using some sort of escape characters or quotation marks etc.? (Calling program "[abc]_[x|y] anotheragument" isn't working either, because it interprets the two arguments as one.)
View 8 Replies View RelatedI have a log file that contains information like this:
----------------------------
r11141 | prasath-palani | 2010-12-23 16:21:24 +0530 (Thu, 23 Dec 2010) | 1 line
Changed paths:
M /projects/
M /projects/
[code]....
what i need is, i need to copy the data given between the "---" to seperate files, for, e.g. the first set of data between the "---" should be in one file and another set of data in another file.
i have a text file like
abc abc abc abc
abc abc abc abc
--- --- --- ---
i want to add a string xyz to end of each line..
abc abc abc abc xyz
abc abc abc abc xyz
abc abc abc abc xyz
--- --- --- --- xyz
--- --- --- --- xyz
how do i do this in bash?
if I can create a bash script that once executer will edit or replace a line a in a file this line is the first one and its just one character that needs to be changed from a 1 to a 0.
How do I go about this? it is for a game called EVE Online, heres what my .sh look like atm
#!/bin/sh
echo fixing prefs.ini
#fix for prefs goes here
echo starting eve
eve
I've written my script so that it reads in the variables $1 $2 $3 $3....$12I have an input file as follows
word1 1 1 2 3 4 5
word2 1 1 2 3 4 5 6
word3 1 1 2 3 4
[code]...
I'm writing a mass snmp toner check which polls any toners available to be snmp polled, however when using a loop statement I get the results on different lines; which sounds good, however the tool I use to check with (nagios) ignores the new lines.
Is there any way I can get the output on one line? Also, I need to raise a fault if any of the toners are below a specific level (with nagios you raise faults with the exit code) - any way I can do this without exiting the loop. Code below with bits and bobs commented out.
Code:
check_ink_levels ()
{
for ID in $INKS
do
[Code].....
I would like to delete a single line from a file that contains many lines passing through the same values as the two parameters. Again, I would like to delete a single line and not all those that contain parameters. How can I make bash?
View 14 Replies View RelatedI keep time sheet entries at work in an sqlite database called 'timesheet'. I have a shell script called 'today' which queries for all timesheet entries which are less than 24 hours old; it looks like this:
Code:
#!/bin/bash
echo "select datetime(start_time, 'unixepoch', 'localtime'), datetime(end_time, 'unixepoch', 'localtime'), project, site, duration from timesheet where start_time > strftime('%s', 'now', '-1 day', 'localtime');" | sqlite3 ~/.timesheet/timesheet.db
In an effort to make it more readable, I've put the query inside a here document:
Code:
#!/bin/bash
cat | sqlite3 ~/.timesheet/timesheet.db << query
select
[Code]...
I installed Ubuntu on my laptop yesterday, and now it won't start up. It will ask me what OS I want (either Windows or Ubuntu) and then it goes to a black screen with the "minimal bash-line..." phrase on it. Before this happened, I had somehow managed to get into full screen terminal. I couldn't get out of it so I just hard restarted the computer, and this happened. What can I do to fix it? It doesn't get as far as asking which version of Ubuntu I want to load.
View 1 Replies View RelatedHow do i do to:1. Check if there is a audio source plugged in via line in?2. Control the volumeI want to do it through either bash or python script.
View 1 Replies View RelatedI would like to know how do I print the line # in a script. My requirement is, I have a script which is about ~5000 lines long. If there are any errors happen I just exit. And I would like to add the line # of the script where the error happened.
View 2 Replies View RelatedBelow is the part of my bash script which uses awk to to fetch a line from a file. Choice is set by a case, and i know it is receiving a proper number because of the echo statement. The problem is with the syntax of the awk command it says the error is with one of the ', but when I run the command at the command line and replace "$choice" with a number it works properly. So I am not sure what is going on.
echo "announcing choice $choice"
command="awk 'NR = "$choice"' beerpong.txt | say"
$command
I need a command to search a string in a file and then to convert the next string in the same line from hexadecimal to binary. I was able to put everything in capitals. The original file can be as such:
E 2
C 1 794
T ffff
E 2
C 1 787
It is not always FFFF! I am trying to do this in a file at once, not reading line by line (using while).
Bash 3.1.7
Suppose this bash script:
Code:
#!/bin/bash
ls foo
I would like the output to be
Code:
ls foo
foo
That is, the command is first echoed then executed. Is it possible to do this? Or is the only way to debug the script?
I've got a bash script I'm using to download a text file list of links via axel. What I'd like to do is automate the movement of completed links in the for loop when axel has successfully completed the download. This is what I've got. I can figure that I can just echo append the line to a new file, but what is the easiest way to delete the line with the link I just downloaded?
Code:
#!/bin/bash
for i in $( cat $1); do
axel --alternate --num-connections=6 $i
export RC=$?
[code]....