I've a lot of websites (100+ directories) I want to create a unique zip with only public subdirectory.
My structure now is like:
- Site 1
--- app
--- tmp
--- log
--- public
[Code]...
At the moment I'm doing:
for i in mdx/[0-9][0-9].png; do cp $i ../../d_s_c/images/mdx ; done
But as well as the directory mdx, I also have other directories called ntt, etc.
How can I say 'For everything in a subdirectory, copy it across to the same subdirectory over at at ../../d_s_c/images'?
Since 2005 when DualCore CPUs came out, you need to create unique multithread algorithms for every particular program? Or you have patterns?
View 4 Replies View RelatedI run the following file with the >log.log redirector and it does not capture errors.
#!/bin/bash
echo ************************BEGIN LOG******************************
date +"%m/%d/%Y %H:%M:%S $HOSTNAME"
cp -f /scripts/original/clamscans.log /scripts
[code]....
The following errors show up when I run from the file from the term window, but are not written to log.log:
tar: /public/public/clamscans/*.txt: Cannot stat: No such file or directory
tar: Error exit delayed from previous errors
mv: cannot stat `/public/public/clamscans/*.txt': No such file or directory
I know with windows you can add the 2>&1 to capture error data. Is there such a thing for Linux?
I have an Archos 605 media player that seems to have become corrupted, so I'm trying to run fsck on it. It mounts as a FAT32 hard drive, so I ran
Code:
sudo dosfsck -a
and this is what I got:
Code:
dosfsck 3.0.7, 24 Dec 2009, FAT32, LFN
There are differences between boot sector and its backup. Differences: (offset:original/backup) 65:03/00 Not automatically fixing this. Unable to create unique name
I was wondering if there is an easy tutorial and/or explaination on how to create Public SSH Keys. Most of what I found is hard to follow and I would need to create on to join groups with the Fedora Project.
View 6 Replies View RelatedIm trying to create a public/private key for open ssh, I don't really know what difference between the two. I want it to all be one command and not have to hit enter after each command. Here is what I mean:i type "ssh-keygen"and it asks me were to save, then my paraphrase, then reenter the paraphrase.I just want to be I guess you could say unattended if that makes any sense.
View 1 Replies View RelatedI'm updating many servers blacklist manualy. from time to time. I want to create a blacklist and host it on a website, and servers will update from this list regularly. For servers I'm using:
Centos
iPcop
Smoothwall
And for proxy I'm using Squid. And I dont use squidguard.
While saving a file I made a typo and performed the vi command ':w~' instead of ':w!' and I created a root '~' instance in one of my subdirectories. How do I remove this reference without wiping out the entire main /root /~ directory? Do I use unlink()?
View 1 Replies View Related$ mkdir backup && mv * backup/
mv: cannot move `backup' to a subdirectory of itself, `backup/backup'
Works, but issues a warning. Also exit code is 1.
How to do it properly (but not [much] longer)?
How Can I Copy Everything in Current Directory to Subdirectory in linux console
View 6 Replies View RelatedI would like to know how can I get permission to subdirectories of a share other than what main share has. I do not want them to have same share I mean for example I share "sharetest" and it has full access for A and B and C groups but "sharetest/foo1" has read only access for A group and "sharetest/foo2" has read only access for B group and "sharetest/foo3" has read only access for all of them.
View 1 Replies View Relatedls -al ../public-back
drwxrwxr-x 4 apache apache 4096 Apr 19 03:32 templates
ls -al ../public-back/templates
drwxrwxr-x 2 apache apache 4096 Apr 19 03:33 content
[code]....
How do I move the contents of /public-back/templates recursively with permissions into /public/templates ?
I have the following command that I run on cygwin:
find /cygdrive/d/tmp/* -maxdepth 0 -mtime -150 -type d | xargs du --max-depth=0 > foldersizesreport.csv
I intended to do the following with this command: for each folder under /d/tmp/ that was modified in last 150 days, check its total size including files within it and report it to file foldersizesreport.csv however that is now not good enough for me, as it turns out inside each
/d/tmp/subfolder1/somefile.properties
/d/tmp/subfolder2/somefile.properties
/d/tmp/subfolder3/somefile.properties
/d/tmp/subfolder4/somefile.properties
so as you see inside each subfolderX there is a file named somefile.properties inside it there is a property SOMEPROPKEY=3808612800100 (among other properties) this is the time in millisecond, i need to change the command so that instead of -mtime -150 it will include in the whole calculation only subfolderX that has a file inside them somefile.properties where the SOMEPROPKEY=3808612800100 is the time in millisecond in future, if the value SOMEPROPKEY=23948948 is in past then dont at all include the folderin the foldersizesreport.csv because its not relevant to me.so the result report should be looking like:
/d/tmp/,subfolder1,<itssizein KB>
/d/tmp/,subfolder2,<itssizein KB>
and if subfolder3 had a SOMEPROPKEY=34243234 (time in ms in past) then it would not be in that csv file.so basically I'm looking for:
find /cygdrive/d/tmp/* -maxdepth 0 -mtime -150 -type d | <only subfolders that have in them property in file SOMEPROPKEY=28374874827 - time in ms in future and not in past | xargs du --max-depth=0 > foldersizesreport.csv
There seems to be a lot written about virtual networking but I am not sure what approach to take in my situation. My local subnet has a public block of 128 addresses. I have a virtual host running on my machine. My machine has a static address and I'd need to assign one to the guest. I have edited the guest's interface file and assigned a public address to it's eth0. However the guest cannot ping out and I can't ping in.
By default the virtual machine manager creates a virtual network (virbr0) and assigned a private address range to it. I have tried to create a new virtual network using a subnet of my public range (/31) but the manager says the range must to a minimum of 16 addresses (/4). It doesn't look possible to achieve my aims using the virtual machine manager.
In the past I have used the procedure laid out here:[URL].. which is to manually create a bridge. I am not sure that is relevant for my 9.10. I think I would have to disable the network manager if I were to do that and I am not sure how to do that.
I have the following /etc/fstab:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
[Code]....
This is, incidentally, the same message that I see while booting. The error message goes away if I comment out the line in fstab starting with /dev/sdc.
I am looking for c/c++ code (no third party lib dependency) to get the physical address of ethernet card on mother board.Most of them suggests to use the linux commands and process the output. For example "/sbin/ifconfig eth0".The problem with above command is that when you run this on a linux variant which is running using VirtualBox on windows host, it's not returning the correct mac address. In this case the correct mac address is the one set for individual virtual machine."/sbin/ifconfig eth0" works fine when linux variant is installed normally.There is another case when linux variant is installed normally and if you install virtualization apps such as VirtualBox or VmPlayer, they create a virtual adepter for their own use. In that case running "/sbin/ifconfig" returns all the adepters. (physical and virtual)
View 1 Replies View RelatedQuote:File1:
Hi, My name is John smith
Quote:
File2:
Hi, My name is smith
I want to show only the different or unique word between the two files (John)i was trying to get it with diff, comm, sort, uniq, grep, awk, sed
In linux, I can grep a string from a file using grep mySearchString myFile.txt.
How can I only get the result which are unique?
I am trying to create users accounts reading from a file. I can get it to show if the user already exists but I want it to instead of not creating the user account to create e.g. Scott1 etc.The code i have so far is :
#!/bin/bash
while read line
do
[code]...
I am doing molecular dynamics where I have to edit files. I have looked at tutorials for grep and sed but can't find my solution. The files produced in my simulations look something like this:
ATOM 1825 NE2 GLN 112 113.646 27.895 14.456
ATOM 1826 HE21 GLN 112 114.020 26.957 14.490
ATOM 1827 HE22 GLN 112 112.649 28.039 14.388
[code]...
I have a deep folder structure on my RHEL 5.x file system which is supposed to have only word(*.doc, *.docx) or pdf(*.pdf) files. But I want to check if there are files with any other extensions which exist. Is that possible?
View 2 Replies View RelatedI'm trying to write a p2p file sharing program using python's built-in libraries. Everything is going well. The only thing is that i'd like to be able to use openssl public and private keys so only a host with the public key could access/decrypt the filesharing. I've gotten these libraries (httplib, basehttpserver, ssl, os) to work using just a pem file containing both the public and private keys but no success with them seperately. Can someone point me in the right direction or offer an alternative? PS, the goal of the project is to create an anonymous, decentralized, secure file sharing program. I want to be able to upload this to sourceforge so everyone can use it, if that's any incentive
View 2 Replies View RelatedHow can I forward all traffic from a public IP to another public IP. Let's say I have a first debian box named box1 with eth0 = 1.1.1.1 and eth0:1 = 1.1.1.2 and I want to forward all traffic from 1.1.1.2 to "box2" located somewhere else over the internet and having for eth0 2.2.2.2 Both 1.1.1.0/24 and 3.3.3.0/24 are public IP ranges.
View 1 Replies View Relatedi need to create a SSH server in my home and i should able to log in my SSH server over the internet from out site. what are the setup i have to do?
View 14 Replies View RelatedI have a machine (mercury) on which /home/hyperhacker/video is a mounted external hard drive while the rest of /home/hyperhacker is on the internal hard disk. I have a second machine (konata) using autofs to automatically mount mercury:/home/hyperhacker in /mnt/mercury as needed. This works, except /mnt/mercury/video shows up empty.mercury:/etc/exports has: Code: /home/hyperhacker konata(ro,subtree_check)/home/hyperhacker/video konata(ro,subtree_check) and I've tried a few variations in konata: Code: $ cat /etc/auto.master
[...]
+auto.master
/mnt /etc/auto.mercury
[code]....
I'm trying to change to a subdirectory:
Code:
tony@advent:~/scratch$ cd Home-Arch
bash: cd: Home-Arch: No such file or directory
So I list the contents of the current directory:
Code:
tony@advent:~/scratch$ ls
duhome Home-Arch qcad_1.dxf qcad_1.svg runme stdout
OK, I assume I have mis-typed the subdirectory name in ways I cannot detect, so I copy the sub-directory name from the output of the 'ls' command, while within the terminal window, and paste it into the next 'cd' command:
Code:
tony@advent:~/scratch$ cd Home-Arch
bash: cd: Home-Arch: No such file or directory
I browse the directory and sub-directory in Nautlius - everything is there where I expect it to be. The folders/files are not hidden. What is happening here?
I have Joomla installed at /var/www/joomla, if I navigate to http://localhost/joomla, I get a 404 error, but if I add index.php, the page loads. What is wrong?? Also I am not able to navigate to the administration part of Joomla for the same reason, typing in index.php doesn't load it in this case. Yes I have verified that all files are present in the directory.
View 7 Replies View RelatedI can't find GNU's public key anywhere. I searched on ftp.gnu.org and I googled, and I can't find their public key.
View 2 Replies View RelatedToday I was bored and i tried to put a lot panels in my desktop, but when I put the fifth panel it was blocked so that did not respond at all (I could only move the mouse), so I had to stop with the button. When I turn on the PC it does normally, but in the "log in" screen I put the password and it doesn't do nothing, just move the mouse.
View 1 Replies View Related
