I am trying to create users accounts reading from a file. I can get it to show if the user already exists but I want it to instead of not creating the user account to create e.g. Scott1 etc.The code i have so far is :
#!/bin/bash
while read line
do
[code]...
I recently found myself in possession of a large file (a few million lines in length) of short strings and would like to count the number of lines that are unique to the file. I thought this would be an easy process, but while working on the problem, I encountered the following. Can anyone explain this weird result to me?
Code:
alaric@alaric-laptop:~/Documents/Programming$ grep '^string$' file.txt | uniq | wc -l
1
[code]....
I am looking at creating two user accounts for "contract system admins"..These guys will be performing sys admin duties for a sever -- however, I am still concerned about security of data. For example, the server contains password information for our database, etc.Besides making them sign an NDA, etc. what other security mechanisms could I put in place to ensure that they don't just go buck wild. For example, when someone makes a sudo command, is this logged?
what are some recommendations for general security practices?
I'm configuring a fresh install of Debian 8 and I'm having a problem creating new user accounts, using XFCE.I'm using the console for setting new user accounts, without any problems yet when I log in the user accounts to check if everything is ready to use I get a persistent message from the system warning the session is in kiosk mode.I've went through several step by step guides I've found over the net, went to the XFCE wiki trying to find an answer for this, with no success. I've even tried deleting user accounts and recreating it but the problem persists.
View 4 Replies View RelatedI have a small office network here which consists of three machines running Fedora 10 and a dev server running CentOS 5.2. I have no Windows machines, and have no intention of having any. I would like to use the CentOS server as the Linux equivalent to a domain controller in Windows. Use case is simple - I will still have a local root account on each machine, obviously, but I want the three staff users to be network accounts. I want them (like a Windows domain) to be able to login on any computer using their network user credentials and *not* have local credentials on any computer.
I've been Googling like mad on this, but I can't find a definitive answer or a sensible HOWTO for this use case in Linux. Others have suggested I do it all in Samba, but I cannot find an example Samba configuration that behaves as I describe above. Another article I found suggested OpenLDAP.I'm lost. What's the best way to do this with a CentOS controller machine and Fedora 10 workstations? Can anyone point me to some good resources on the matter?
Is it possible to completely disable the password change for users accounts in linux?? (I don't mind account lock)
View 2 Replies View RelatedHowto show all created users accounts on squeeze?
View 2 Replies View RelatedI'm using vsftpd as my FTP server. I have set it up so I can access my home directory via FTP, requiring my login.
But I want to make a folder in my documents (or anywhere really), which only my colleague can access. But I don't want to make a local Ubuntu user account. He just needs to be able to send files to this folder, connecting remotely, using his own login details.
We have 4 servers having rhel 5.2. We have several users logged in on one of them. We have nis server/client running on them and have common home area mounted on all of them. Now we want to disable/block the accounts of the users who have not accessed our servers in last 2 months from today. What logic should we apply to do so? We were checking stat of .bashrc of each user but is not correct logic. We are going to write shell script for the same. We don't want to do anything in users home area or their files.
View 2 Replies View RelatedI have the following perl/DBI script:
Quote:
#!/usr/bin/perl
use DBI;
my ($db, $user, $pw) = ('dbname', '****', '***********');
my $dbh = DBI->connect("DBI:mysql:$db",$user,$pw) or die "Cannot connect to $db: $DBI::errstr
[code].....
The error message is
[Wed Feb 24 13:03:27 2010] myscript.cgi: DBD::mysql::st execute failed: Column count doesn't match value count at row 1 at myscript.cgi. [Wed Feb 24 13:03:27 2010] myscript.cgi: DBI::db=HASH(0x8a30c60)->errstr
I was wondering if someone could maybe provide me with a list of things to give a new user using the useradd utility. ( home directory, permissions, etc.) or even point me in the direction of a solid walkthrough
View 4 Replies View RelatedI want to make a script to create a videos , photos, and documents folder in all of my (or anyone's) user's home folder. Wildcards don't seem to work if I try to put in: sudo mkdir /home/WILDCARD/videos here is my error.
mkdir: cannot create directory `/home/*/videos1': No such file or directory
and just to clarify i want all user's to have there own seperate folders not shared.
P.S. I tried with the -p switch and no luck. I just got a new home folder for * with the videos folder inside.
My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedI need to create a lot of users locally on my server.I have these info:username:GID:UID.How I can make a "for cycle" for make a multiple useradd? (useradd -u UID -g GID -m /home/USERNAME -s /bin/bash USERNAME)I tried to do this:
touch userlist.txt (UID:GID:USERNAME)
100:110:user1
200:210:user2
[code]...
I am looking for c/c++ code (no third party lib dependency) to get the physical address of ethernet card on mother board.Most of them suggests to use the linux commands and process the output. For example "/sbin/ifconfig eth0".The problem with above command is that when you run this on a linux variant which is running using VirtualBox on windows host, it's not returning the correct mac address. In this case the correct mac address is the one set for individual virtual machine."/sbin/ifconfig eth0" works fine when linux variant is installed normally.There is another case when linux variant is installed normally and if you install virtualization apps such as VirtualBox or VmPlayer, they create a virtual adepter for their own use. In that case running "/sbin/ifconfig" returns all the adepters. (physical and virtual)
View 1 Replies View RelatedI've a lot of websites (100+ directories) I want to create a unique zip with only public subdirectory.
My structure now is like:
- Site 1
--- app
--- tmp
--- log
--- public
[Code]...
Quote:File1:
Hi, My name is John smith
Quote:
File2:
Hi, My name is smith
I want to show only the different or unique word between the two files (John)i was trying to get it with diff, comm, sort, uniq, grep, awk, sed
I have a box that's used as an SFTP server. All users have restricted shell so they can only use SFTP to send and receive files. But it makes it hard to have them change their passwords. I thought that if we had a web page set up where the user could enter their username, old password, new password and confirmed new password, that this would be the easiest solution.
View 1 Replies View RelatedIn linux, I can grep a string from a file using grep mySearchString myFile.txt.
How can I only get the result which are unique?
I am doing molecular dynamics where I have to edit files. I have looked at tutorials for grep and sed but can't find my solution. The files produced in my simulations look something like this:
ATOM 1825 NE2 GLN 112 113.646 27.895 14.456
ATOM 1826 HE21 GLN 112 114.020 26.957 14.490
ATOM 1827 HE22 GLN 112 112.649 28.039 14.388
[code]...
I have a deep folder structure on my RHEL 5.x file system which is supposed to have only word(*.doc, *.docx) or pdf(*.pdf) files. But I want to check if there are files with any other extensions which exist. Is that possible?
View 2 Replies View RelatedHow to created users in pureftpd and the users are stored in mysql database. I tried when i try to connect i got like this error authentication failed error
View 1 Replies View RelatedHow can I display the no. of lines, words and characters for each file in current directory and in sub directory.
wc . * shows errornous result as there are some executable files in that directory.
I list all the instances of a running process my doing:ps -ef | grep myprogramThis lists all them.how can I simply output a count of how many are running?
View 2 Replies View Relatedi have a NIS master server and 4 NIS clients. out of 4 nis clients two are acting as login servers ie users will login and do all their stuffs and the remaining two are application servers. But sometimes users login into applications servers and started doing all their developer's job. i want to allow only a limited number of users tointo this application users not all the users who are all part of the nis domain.all the systems are running RHEL 5.4 on hp's proliant x86_64 based servers. Please advice me how should i proceed? enabling ip tables is not possible in my environment.
View 1 Replies View RelatedWhen I have different people log into our ftp and browse to the same folder, some people see the files inside, some don't. all the user accounts are in the same group, which has permission to this folder. but the one user who can see the files is the owner. how can i fix it so everyone in that group who's the owner of the folder can see the files?
View 10 Replies View RelatedI have a really deep directory tree on my Linux box. I would like to count all of the files in that path, including all of the subdirectories.
For instance, given this directory tree:
/home/blue
/home/red
/home/dir/green
/home/dir/yellow
/home/otherDir/
If I pass in /home, I would like for it to return 4 files. Or, bonus points if it returns 4 files, 2 directories. Basically, I want the equivalent of right-clicking a folder on Windows and selecting properties and seeing how many files/folders are contained in that folder.
How can I most easily do this? I have a solution involving a Python script I wrote, but why isn't this as easy as running ls | wc or similar?
We are working on our subscription renewal and now since Red Hat has changed their subscription model we need to give them the number of physical CPU sockets on each system.I have tried looking thru /proc/cpuinfo as well as tried to parse data out from dmidecode but both of those solutions count each individual core as a CPU.Is there a clean and easy way to determine the number of sockets on each system? We also use RHN Satellite to manage our systems but I believe that is pulling the same data from dmidecode
View 2 Replies View RelatedIs there a software in linux ubuntu that can count scans???
View 1 Replies View RelatedI would like to count all the jpgs in my home folder I need a command like this:
~$ Sudo count -R /*/*.jpg