what is the correct process for updating an application installed via the './configure, make, make install' sequence?For example, I have an app checked out via a git repository, on which I run the 'make install' on to install. Then a few days later I run a git pull to update to the latest release, do I just run the same sequence again or should I 'make uninstall' first?
View 3 RepliesWhen I try wget URL... I get failed: connection timed out.I have created br0 as a bridge over eth0 to run this VM. The host has this IP 172.30.8.135.The host has access to internet through eth0 and this is the output of route inside the host.
View 1 Replies View RelatedI am playing around with RH for the first time. I have two applications which insist on using names for network ranges - so they need /etc/networks. I created one on the RH box as suggested via google but the apps still cant see the names (basically they are not reading /etc/networks). What is the correct process to create network names on RH? Basically the equivalent of solaris /etc/networks?
View 4 Replies View RelatedI have installed Redshift But do not know what to do Next.There is no icon for the application or anything to launch the application.
View 1 Replies View RelatedMy downloads are navigating to my home folder but not being deposited into the download folder as you can see by the screen shot . I don't know how to configure the correct path to the folder
View 2 Replies View Relatedi have made a website and i want to use it in my lan.it is working with ip address but i want to use name convention.dns server is working correctly.my server ip is 192.168.0.254 and sample website is [URL] computers in my lan can open it using http://192.168.0.254 but not by [URL] what things i need to edit in named.conf file and in forward zone and reverse zone files?
View 3 Replies View Relatedran ubuntu tweak clean up on kernals and it failed to remove one. following this tried to search for updates and getting this error
[code]...
My current gem env returns:
RubyGems Environment:
- RUBYGEMS VERSION: 1.3.6
- RUBY VERSION: 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux]
[code]....
I got a new hard drive in and decided to do a completely new install of 11.4 64 on my "testing/spare machine:. I have my dual monitors configured properly But I ran into two issues. When doing a manual post install update from the 11.4 updates repo I have one file that will not play happily named cronie. When trying to install the application wspr from the hamradio repo I get the following error for an unsatisfied dependency. I have the same application installed on another 11.4 installation on this system and it didn't choke on this file.
View 7 Replies View RelatedI'm having a problem with NFS. I'm trying to mount /home, which is on the server, to the client nodes. The server is currently running FC14 (64 bit) and I'm in the process of updating all the clients nodes to the same OS. Currently, all the client nodes are running FC8 (32 bit) and are capable of mounting /home on the server. However, the one client node that I have updated to FC14 is having problems mounting /home. I can ssh to the node with no problem however I get the following message:
Could not chdir to home directory /home/myuserid: Permission denied. Now, if I excute the following command: "sudo mount -a" I get no errors and now I can see my home directory.
I have OpenSuse 11.3 KDE installed in dual boot with Win 7. Have used Ubuntu in the past and remember that whenever I started my computer with Ubuntu, i had a black colored screen which showed various kernel options. So in short I was sure that the Ubuntu installation had updated itself. On the contrary, whenever I start Suse 11.3 KDE, it shows me just one option of Suse 2.6.34.7-0.7
I have doubts, is Suse up-to-date, and also there is mention of KDE 4.6 on kde.org website.
But my operating system information is as follows:
KDE: 4.4.4 (KDE 4.4.4) "release 3"
OS: Linux 2.6.34.7 -0.7 -default i686
System: openSUSE 11.3 (i586)
I have also seen that on 10th Mar 2011, Suse 11.4 will be realeased. Will update/ upgrade of this installation work in this direction?
I am running kde 4.4 in virtualbox , but cannot create xorg.conf to get a correct resolution. X -configure = segfault. Older releases were fine - lenny, even ubuntu hardy / lucid.
View 6 Replies View RelatedError messege: sudo dpkg configure a' to correct the problem. I used synaptic package manager to install WIne....It stalls on"ttf-mscorefonts-installer (3.0". So, I try update manager and it asked me to restart computer which I do. When I try to re-run synaptic manager I get the above error.
View 2 Replies View RelatedIs there a way to configure a process to be launched in the "n"th working day?
Let's say n=5. In this case, if the 5th of the month is on Saturday, then the 5th working day will be on Monday so I would like to launch the process on the 7th.
The same when the 5th of the month is on Monday, it means that it's only the 3rd working day, so I would need to launch the process on Wednesday - the 7th of the month.
I tried to update my eclipse to the Helios version through a PPA, but I wanted to use it for programming in C / C++, in order to integrate it with the NS-3. After updating CDT installed the plugin but could not create project in C / C + + because they did not appear in the File -> New -> Project. I decided to return to the previous version to see the eclipse in the repositories by default.I did:
Code:
sudo apt-get purge eclipse*
sudo apt-get autoclean
[code]....
There was a kernel update included in my last three attempts of online updating SuSE 11.2 -- all of which which ended with an error, something like kernel rpm could not be installed (one can't copy that out of the YAST-window ).
The new kernel-relevant directories are there under /boot, the original 2.6.31.5 is gone. This produced lots of errors during the next boot until I manually re-assigned links in /lib/modules pointing to the new kernels. "uname -a" shows my old kernel (see also this thread: [url].
I ran "rpm --rebuilddb" and re-tried the installation, all to no avail.
In the message box during install came about 1,5 MB of errors, a brief extract is shown below:
Code:
Any ideas how to proceed? Can one delete the rpm database and rebuild it from the online repositories?
I have searched for the solution with no luck and still wondering if there is a way to find out what's an application process name is from the name of the application itself. And then pkill the process from the terminal.I tried using
Code:
ps -e | grep ....but it says[code]....
I am new to this debian plotform. How can I add my app to init.d linkup.
I did my programe for I2C Bit banging method and got output on Beaglebone black rev.C hardware.
I want to run my code after booting of beaglebone with out connecting to laptop or login process.
I want just powerup,then run my programe default.
/***************************Extra Information*************
#etc/inittab file
# The default runlevel.
id:2:initdefault:
# Boot-time system configuration/initialization script.
# This is run first except when booting in emergency (-b) mode.
si::sysinit:/etc/init.d/rcS
[Code] .....
I have successfully installed a dual boot system with Fedora 14 on drive sdb and WIN7 on drive sda, with Fedora 14 being the major (default) OS. The system is an AM3 with a quad core CPU and all SATA drives. The drives are set to IDE mode, and I am wondering:-
1. What are the benefits of AHCI - will it improve the speed and responsiveness of my system? And
2. If it is worth installing, do I have to do a complete re-install of the OS, or is there some way of updating the installed Fedora to include and operate with AHCI mode drives?
I'm quite happy with the system as it is now, but if there is a way to squeeze extra speed out of it I'm willing to give it a go. And never having been involved with SATA drives and Linux previously, I'm completely ignorant on the subject.
Is there any way to take a look which process/application is using SWAP partition/file?
View 1 Replies View RelatedI'm porting C++ application from ARM to MIPS platform. It works now, but I see some strange timing problems. I've seen now that My app process is called multiply time. Here is "top" output:
Mem: 24592K used, 102084K free, 0K shrd, 0K buff, 16864K cached
CPU: 0% usr 99% sys 0% nice 0% idle 0% io 0% irq 0% softirq
Load average: 4.02 2.17 0.95
PID PPID USER STAT VSZ %MEM %CPU COMMAND
1888 1875 admin R 12096 10% 98% ./my_app.exe
code....
I don't see something like this when I compile it for x86, nor ARM.On MIPS I use uClibc instead of glibc.
I'm using 10.10 and from today I'm getting this error Quote:dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. When I'm trying to install any software using
Code: sudo apt-get <sw-name> Also I'm unable install using "Ubuntu Software Center", showing unhandleable error. Here is the details:
Traceback (most recent call last):
File "/usr/lib/python2.6/dist-packages/aptdaemon/worker.py", line 769, in simulate
return self._simulate_helper(trans, status_path)
[Code]...
I have Samsug CLP 315 laser printer. To my delight Samsung provides software to monitor the fill level of the cartriges. I found that is done by a process which continuesly uses cpu power. Very little...but anyway. A constant check is not necessary. How and where could I configure this process, so it would run lets say very hour of so?
View 9 Replies View RelatedSo I want to Use CoverGloobus with the Last.Fm Application, how can I do it?
View 3 Replies View RelatedI have set up an encrypted ext4 partition on a new external USB HDD. When I plug it in, some sequence of a daemons and scripts cheerfully puts up a dialog to ask me for my pass phrase and then creates a mount point and mounts the drive in /media. I'd like to know how to configure this process to change the name of the mount point (right now it's an unwieldy hex string), it's permissions and ownership. I'm sure this is straightforward, but I just don't what the relevant programs and files are.
View 2 Replies View RelatedI am using Compiz, and am trying to use Animations to make only Gloobus Preview (Window name= gloobus-preview) open with one of three animations. I have selected Horizontal Folds, Sidekick, and Zoom in Random Effects, made a new item for Open, set its duration to 200, set it to Random, and have tried everything possible to try and get only Gloobus Preview to have an animation, but nothing works. I can get everything except Gloobus Preview to have an animation, but if I do the opposite, then nothing works. If I set it to "any", then Gloobus Preview animates, but so does everything else. I would like for nothing to have an open animation except for Gloobus Preview. How can I do this in Compiz's Animations?
View 1 Replies View Relatedshould the wine be configure to run the windows application. or will it run with out any configuration?
View 5 Replies View Relatedas an absolute newbie I downloaded my first application. RealPlayer11GOLD.rpmFrom info on this forum, I managed to install the package with the rpm command as root on openSuSE 11.1When done, it said finished.But now I cannot find the player. Where do I go wrong?
View 9 Replies View RelatedHow i can configure my conky application to make the gui beautiful ! i can't find a good tuto.
View 4 Replies View RelatedI was wondering is there a way I can install/configure an application to /opt instead of /usr or /usr/local like many do by default? I am most interested in install .deb packages in this manner how ever I am willing to compiling things from source if need be.
View 5 Replies View Related