The current directory contains:A file called "original.txt" Many directories called "source_001", "source_002", "source_003" ... From the command line how do you copy "original.txt" to "source_001" and "source_002" and "source_003" ...
The total number of these source directories is unknown, it changes every week.
After scouring the internet I was able to find an Adobe release of Adobe Flash Player Square for Linux 64 bit installations in the form of a file (libflashplayer.so). After copying the file to several different Mozilla directories and also making libflashplayer.so executable with the use of chmod +x libflashplayer.so I was unable to install the plug-in.To what directory must I install this .so file to get it to work? Also when I open the browser and user url://aboutlugins I don't see Adobe Flash Player Square yet. Is there an intermediary step?
View 8 Replies View RelatedI have 60+ directory's each containing multiple .doc files. I need to move them to a single directory and keep their file name intact. I don't think cp will do that with out listing all the file names. I was thinking of something like: cp -r /dir/*.doc /newdir . Or should I use a combo like find -type *.doc|cp /newdir?
View 5 Replies View RelatedDescription: I am a newly appointed system engineer taking care of linux servers. We have a new set of data coming in which need below configuration: How to do a script with function?:
for files with ".txt" in sm
copy each of the files to folder : sm1 and sm2 (log every copy)
if succesful:
remove original
log into the log file
if not successful: (not successful copying 1 particular file to all the folders)
retain and retry
log into the log file
mail out the admin with that particular file name
I have already do try a bit:
cd /export/home/
for dir in sm1 sm2; do
cp -p sm/*.txt $dir/
done
Is my starting right? How to do the rest parts?
I would like to copy all the directories (including data) from the Linux box to an external hard drive.
View 1 Replies View RelatedHow do I copy and/or move files to the base folder of a user? I don't know what is is called, so I do not know what to put in the my file "?" command? I know you would normally put mv filename /directoryname, but what is the base username called?
View 1 Replies View RelatedAsuming I have two files, one large file and one small file, I want to write the smaller file to the large file without overwriting the remaining part of the larger file.
Both are binary files, and the large file can become very large, so I want to avoid copying the whole file, as that will take some time. Is there any standard Linux console utility to do this, or do I need to write it myself?
copying permissions from one file to another.I know that command for changing permission is "chmod", for example chmod 666 filename However, I have one file filename1 and by listing all contents of a directory with ls -al I can find out its permissions in form -rwwx and similar. Now I want to define exact same permissions to other file "filename2". How to use chmod command to accomplish this. Other way around would be to simply copy permissions from one file to another. Is there any command for this purpose?
View 3 Replies View RelatedIs it possible to copy a file on multiple remote machines through scp in one command?
View 3 Replies View RelatedI'm getting a video from a camera connected to the computer and saving it to a constantly increasing file.
The thing is that I'm trying to make a non-stop copy of this file over the network (i.e. using scp, rsync or something like that).
Solaris is the os used. I want to copy files from UNIX Machine to windows network drive.I know smbclient,ftp can be used. But is there any other best option i can use?
View 2 Replies View RelatedI am trying to copy four files from my machine, through a second machine, and finally to the destination. The destination computer can only be reached through the second computer, and I am curious to know if there is an easy way to do this. I am able to ssh to the middle machine and then ssh from there to the destination. I know that I could just copy from the first machine to the second, and then from there to the third. I guess that I'm curious to know what kind of command I can run to do this all at once or even if I could do such a thing (which I'm betting I can). I need to copy these files as root on the destination machine too.
View 6 Replies View RelatedI am quite confused about the following description on fork. Could you please explain it ?The child process shall have its own copy of the parent's file descriptors. Each of the child's file descriptors shall refer to the same open file description with the corresponding file descriptor of the parent.For example, I am opening a socket and then fork. Now, does the child have a separate socket or is shares it with the parent. Does I have any impact on using it in child?
View 2 Replies View RelatedI have generated a list of directories that I would like to use ls and grep on, but it is not working. I am using the commandCode:cat directories.dat | xargs lsand I get a whole lot of these errors:Code:ls: cannot access ./foo/bar/baz/grault/*: No such file or directorybut when I try the directories manually one at a time I find that they all exist and all have files in them. Same thing if I try to grep anything. What is going wrong?
View 6 Replies View RelatedI stay in /var/www/upload and I want extract a file with tar command.
The output of tar xfvz /var/www/file.tar.gz is
Quote:
tar: /var/www/esempio.tar.bz2: funzione "open" non riuscita: Nessun file o directory
tar: Errore irrimediabile: uscita immediata
tar: Child returned status 2
tar: Uscita con stato di fallimento in base agli errori precedenti
I have found ways to tar a directory and exclude certain directories but is there a way to simply tar multiple directories (they are in the same directory) in to one .tgz file?
View 8 Replies View RelatedI'm trying to resume copying from a mounted CIFS device to my local hdd with cURL. I tried
Code:
$ curl -C - -O file://myfile
and also
Code:
$ curl -C <manual offset> -O file://myfile
(looked up the manual offset using "$ wc -c")
This resumes copying if I cancel it eg with ^C.
But it does not work if I unmount and remount the CIFS device. cURL then ignores my given offset and continues again from start as if nothing were there without saying a word. With "-C -" the same effect.
I've spent ages trying to build this and had a good look around for a way to do it. I have a directory tree which contains a set of folders and files. Some of the folders contain more than one file but most contain only a single one. I'm trying to move all of the files which are on their own in directories one level below the root into the root. E.g:
Root is: /volume3
Single file in a sub folder: /volume3/20110103/20110103.log
File should end up as: /volume3/20110103.log
I know how to flatten the entire structure fairly easily but its the conditional part which I can't figure out how to do.
I am trying to write a script to pick the directory name from a list of file. Here is a detailed picture.Have a file name LIST which contains the follwing for example/apps/oracle/product/test1/apps/oracle/product/test2/apps/oracle/product/test3I need a script that reads these line from LIST and creates foldersin /apps/oracle/product/test1/backup/date/test1 after reading the first line
/backup/date/test2 after readin the second line/backup/date/test3 and so on.
I have a dir (pub_html) with 45 sub dirsand in each there is a file with name file123.html) what command can I use to rename all files with this name in all sub dirs to file456.html ? I'm on opensuse 11.3
View 14 Replies View RelatedCreate a copy of the file above and call it commands.sorted. Use the vi command to manually sort this file. I.e. use yy to copy a line, P or p to paste a line, and dd delete a line. Order the commands with the two lines starting with double quotes first. Then list the rest of the command in alphabetical order.
Anyone have any ideas what he's talking about? Can I copy a file and rename it at the same time while copying it to the same exact directory again? Now sure what the two lines things means either. I have an email out to him but it usually takes a long time for him to answer me. I got alot of work to do so everytime I get hung up it kills me.
Need to replace the following string :
By
In multiple .exp files and in sub directories.
i am in need of linux help. iam at college and i need this back/restore script to pass this final part of an assessment. i require a backup script that will not only backup but also restore files to the relevent directories. e.g. users are instructed to store all wordprocessor files in a directory named wp. so i am needing to create a backup directory and 3 directories within that and some files within the 3 directories and then back them up ot restore them. l know i should/have to do this myself by been trying to get/understand info for the last few days and came up with zero.
View 14 Replies View RelatedI want to make a webserver with multiple users allowed to login through SFTP to a specific folder, www.Multiple users are added, lets say user1 and user2, and all of them belonging to the www-data group. The www directory has an owner www-data and a group www-data.
I have used chmod -R 775 on the www folder, but after I try to create a folder test through my SFTP server (using Filezilla) the group of the directory created has only r and x permissions, and I am not able to log in with the second user user2 and create a directory within www/test due to a lack of w permission to the group.
I also tried using chmod 2775 on www directory, but without luck. Can somebody explain to me, how can I make it so that a newly created directory inherits the root directory group permissions?
I'm not sure if this is possible or even where to start. I assume that this can be done with an sh script using tar or similar.I have several very large zip files that contain images for all of the products in my online store. Each image is named after its 13 digit SKU (for example, 9987788000012.jpg). In order to import products into my store, all images are placed into a media directory. Unfortunately, there are over 100,000 images.
So I would like to break the images into sub-folders based on file name. For example, when I extract store_images.zip (or tar or whatever), my extract script would create directories (if they don't already exist) based on the first three digits of each image name, placing each image into the appropriate bottom level directory. For example, "9987788000012.jpg" would be placed in the following directory "media/9/9/8", with media as the root and "8" as the directory that holds any images that start with "998". Perhaps two sub-folders would be less cumbersome.Assuming this requires a script, particularly since it involves scanning image names, creating folders, and saving images to specific directories, which language would serve my needs best? PHP? Has anyone had to do something similar?
is there any way so that we can restrict root to delete a file/directories and What is extended file attributes.
View 12 Replies View RelatedI can do:mkdir messages and then: touch messages/hello.txt Is there a command that will do both - create the directory if it doesn't exist, and then the empty file? Something like: touch -p messages/hello.txt
View 1 Replies View RelatedI'm trying to convert all file extensions for files in many sub-directories from uppercase to lowercase. I have two problems, how to list the absolute path to the files recursively over many sub-directories for which I so far have this:-
Code:
find ~/Photos -print which would be fine, except it gives the directories on their own when it finds them rather than just the files with absolute paths. I couldn't find a switch for the "ls" command to do this, so I had to improvise with "find". and once I get grab each absolute file name, to just change the file extension rather than the entire file, which is what I have at the moment.
[Code]..
I am writing a script, in that my requirement is, if all the fill types stored in one directory from that we need to separate different different directories based on the file types.
for example in a directory(anish). 5 different types files
1- directory
2- .txt files
2- .sh files
like that and my requirement is the (1- directory is moved to one new directory(dir) which we are given in the script)and (2 .txt files are moved to another new directory(test) which we are given in the script)and ( 2 .sh files are moved to another new directory(bash) which we are given in the scrip)finally the directory anish should be empty..using bash script.how it is possible !!
I am having problems with scp during a backup operationI added a ps -ef before and after the scp operation used during the backup.The backup is a script to backup a Zimbra ServerI am including the code segment that I am having problems
Code:
# DRCP Section. To scp newly created archives to a remote system
if [ "$DRCP" = "yes" ]
[code]...