General :: Connect The Wireless With The Command?

Apr 13, 2011

how to connect the wireless with the command in linux?

View 1 Replies


ADVERTISEMENT

General :: Using Command Line To Connect To A Wireless Network With An Http Login?

Apr 18, 2010

I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something.

Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

View 2 Replies View Related

Networking :: Connect To A Wireless Via Command Line Instead Of Utilizing The GUI?

Jul 27, 2011

So i was wondering if anyone can help me connect to a wireless network via command line instead of utilizing the GUI

so far i have done this, but im not sure what to do after this

Nexus:~ # ifconfig wlan0 down
Nexus:~ # ifconfig wlan0 up
Nexus:~ # iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.

[Code]...

View 5 Replies View Related

Fedora Networking :: Connect To The Wireless Network Via Command Line?

Jul 10, 2009

I am fairly familiar with Linux but had never ventured into Wlan settings / options / too much. I have compatible card (aetheros) and when running - iwlist wlan0 scanning - I get plenty networks showing up - meaning the card works. When I installed distro which is last night (before I ran update), I had that little bars menu at the top of the screen that showed available networks once clicked upon. Since I like to modify and make my settings better - I removed that little AT&T like bar, and now rebooted after update to find that I can not see available networks unless I use iwliset wlan0 scanning.... .#$*&)@&#(&%# - need I say more.

Two questions - how do you connect to the wireless network via command line? What is that vertical bars GUI tool called so I can find it and run it again? Is there (for the love of god) alternative to system-config-network GUI managment tool for wlan?

View 2 Replies View Related

Fedora Networking :: Connect To Wireless Network Using Command Line

Aug 17, 2009

I'm tryn' to connect to my wireless network using command line:iwconfig wlan0 essid MY_NETWORK as root.

After this typingiwconfig wlan0
result is:
wlan0 IEEE 802.11g ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s

[Code]....

I installed ndiswrapper in order to use ipn2200 WinXp drivers.

View 4 Replies View Related

Networking :: Connect To A Hidden Wireless Network From Command Prompt?

Jan 21, 2010

connect to a hidden wireless network from command prompt? The networks ESSID is "sh0mis"

View 5 Replies View Related

General :: Connect Sqlplus Through Command Prompt

Nov 29, 2010

I am working as oracle DBA on 10g . Till last day I had worked on windows platform. Now my company want me to work on Linux platform. I am first time using Linux dont know A,B,C of Linux . I want to connect sqlplus through linux command prompt. I have exported enviornment variable of oracle but I am getting permission denied Below mention steps I ahd followed . Please help me to solve it

[oracle@bhel1 mj]$ ORACLE_SID=V7;export ORACLE_SID
[oracle@bhel1 mj]$ ORACLE_HOME=/usr/lib/oracle/v7/app/oracle/prod
ver;export ORACLE_HOME
[oracle@bhel1 mj]$ PATH=$ORACLE_HOME/bin:$PATH;export PATH
[oracle@bhel1 mj]$ NLS_LANG=AMERICAN_AMERICA.AL32UTF8;export NLS_
[oracle@bhel1 mj]$ LD_LIBRARY_PATH=$ORACLE_HOME/lib:$LD_LIBRARY_P
LIBRARY_PATH
[Code]....

View 1 Replies View Related

General :: Debian Wireless Won't Connect?

May 10, 2011

I just installed Debian on my netbook and everything is working fine but the wireless. When I typed in the name of the network and the wep it said it failed and was probably not using dhcp. I went on with the installation and now I am not sure how to set up my wireless. I have an ASUS netbook.

View 2 Replies View Related

General :: Connect To A Wireless Router?

Mar 13, 2011

I just downloaded ubuntu 10.4 today. I can't seem to figure out how to connect to the Internet.

View 7 Replies View Related

General :: Wireless Key For WEP Not Supported - How To Connect

Jul 5, 2010

I'm trying to connect to a wep network. The password is very long and contains spaces. Someone wrote that this might be a solution: 'The key to gaining authentication against WEP is to see what hexi-string the router has on itself. I copied the string off my sister's, and now I use that string as my authentication, with the help of the iwconfig command.' What is the iwconfig command? And how exactly do you go on with this?

View 11 Replies View Related

General :: NM And WICD Cannot Connect To WEP / WPA 2 Wireless

Sep 27, 2009

Newish to linux, been using Ubuntu for about a year, moved onto Sabayon 4.2 now. I also have another laptop with Kubuntu that is using Network Manager, it has no problem connecting to my wireless, one wireless uses WEP and one uses WPA 2. When my main laptop used Ubuntu it was using Network Manager, that connected with no problem. However Sabayon seems to have a problem. Initially I thought it was the DVD that I used to install it in, but after re-burning it and installing from fresh the problem still remains. What happens is that NM when connecting to a wireless prompts for a passkey, I enter it in and it fails right away.

This happens for WEP and WPA. If the network is unsecure then it connects with no problem. So I emerged WICD 1.6 to see if that would work, it hangs on 'Obtaining IP Address'. If I put static IP then it connects, but this cant be an option as at my University campus I cant set a static IP. I have tried to find the log file for NM, but cannot locate it. I understand that it should be located in /var/log/daemon.log, but daemon.log does not exist on my system. I checked every NM directory and could not find any log files. I have tried changing the settings in WICD to no effect.

View 3 Replies View Related

General :: Unable To Connect To Wireless: Red Hat?

Mar 23, 2010

I have installed redhat linux on my laptop. Now I can not connected to the internet. I have wireless router at home. My other laptop works fine but not the linux one. do I need a wireless adapter for linux or?

View 1 Replies View Related

General :: Wireless Networks Seen But Never Connect To WPA / WEP?

Sep 2, 2009

I am fairly new to linux, I getting to grips with the offline and I am starting to be converted. The major problem I have is that I cannot get it to connect to my wireless network. I am using Fedora and my wireless card is the Belkin Wireless G Desktop Network Card - F5D7000uk (version 3000uk).

I am able to see the network and pick up the essid automatically through networkmanager or iwlist scan. I have tried to connect using Network manager:
- it picks up the information and I submit my WEP key and the icon top right shows two green dots with a blue flame(?) rotating between them for a few minutes before asking for my key again.

And using the terminal commands.

Code:
$ sudo iwconfig wlan0 mode managed
$ sudo iwconfig wlan0 essid "BTHomeHub3-12GT"
$ sudo iwconfig wlan0 key 563865428
then tried to test the connection using

Code:
$ sudo ping www.bbc.co.uk
ping: unknown host www.bbc.co.uk

Code:
sudo iwconfig wlan0
wlan0
IEEE 802.11bg ESSID:"BTHomeHub3-12GT"
Mode:Managed Frequency:2.412 GHz Access Point: Not-Associated
Tx-Power=20 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Power Management: off
Link Quality: 0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0

View 3 Replies View Related

General :: Shell - Connect From Command Line To FTP Server With Proxy?

Aug 15, 2011

I want to connect to an FTP server from the Linux command line. The server is configured behind a proxy.

If I call:

echo $ftp_proxy

I get a result like this:

abc.def.ghi.jkl:8080

If I call:

ftp -pn $ftp_proxy

I get a unknown host error.

How can I connect to the FTP server using the Linux command line?

View 1 Replies View Related

General :: Connect To A Wireless Network Shared By A Mac?

Mar 9, 2011

Mac OS X has built-in support for internet connection sharing through the settings as in the following screenshot:

This works very well with other Macs, but I'm having problems connecting to such a network using Linux. I tried all combinations of configuration, double- and triple-check the WEP password but could never get an IP address. In a last effort I also tried without encryption, but still couldn't get my Linux box connect to the network.

I don't know if Windows has the same problem. Now I'm suspecting two things. Either I misconfigured something in my Linux installation, or OS X is doing something smart and makes it difficult for non-Apple devices to use the network (I also tested with an iPhone, it connects very well, unsurprisingly). Now what is wrong? What do I have to do?

View 1 Replies View Related

General :: Ubuntu & Wireless Network - Does Not Connect?

May 3, 2011

Tried the live boot of Ubuntu 10.04 LTS on my work PC today (it has Windows Vista on it and it is literally DEAD slow). There's a wireless network in the office and the PC has a wireless network card installed.
The problem was the following - I booted up Ubuntu, the "tray" was showing the network icon. I click on it, it shows me the list of all available wireless networks. I click on the one that belongs to our office, enter the password, click "Connect".

Now, here comes the problem - after "loading" for some three minutes, the same window pops back up. No errors, no messages, absolutely nothing. The password is correct because the Windows installation and the other PCs in the office can connect just fine. Anyone knows what could be the problem? The drivers are apparently fine if it can find the networks and detect the connection encryption correctly.

View 1 Replies View Related

General :: Connect To Internet With A Usb Wireless From Belkin?

Jan 1, 2011

I am new to ubuntu and am trying to connect to the Internet with a usb wireless from belkin. Attached is the wireless_setup.txt.

View 2 Replies View Related

General :: Internet - Cannot Connect To The Wireless Network

Jan 2, 2011

I am a LINUX newbie using Ubuntu. I love it so far but I am having issues. I cannot connect to the wireless network that I am using with my other Windows PC. The problem in my opinion is that the wireless device I use isn't operating. No light comes on the device. I am not sure how to "find hardware" with Ubuntu.

View 9 Replies View Related

General :: Cannot Connect To Wireless Network In Ubuntu 10.04

Jul 1, 2010

I have ubuntu 10.04 netbook edition running on dell mini 10 and i cannot connect to my wireless network. I entered in everything on the editing wireless network section of ubuntu. However when I try to enter in the mac address as soon as I start typing the apply button becomes unactive. I have entered it before and I did connect to my wireless net with my netbook. However I tried top connect this morning and I wouldn't let me! I did not connect automatically to my wireless net work as it had before. I am typing this message on my desktop using the same internet connection so, I know that the net is active.

View 15 Replies View Related

General :: Connect To Wireless Network Arch

May 12, 2011

I just install arch linux yesterday. And I have an issue with the wireless connection. I can see wireless connections, when i click on thet networkmanager. But I cannot connect. If I remove WPA or any security from the wireless connection(from my wifi router) I can connect to wireless network without any issue. But when there is any security is involved to the connection it does not connect. How to connect to wireless. I've been using debian for a long time, but there was no any issue with this connecting thing. I am new to arch linux.

View 18 Replies View Related

General :: Distros Will Not Connect To Wireless Router?

Jun 12, 2011

There's only one thing preventing me from completely making the switch from Lose-dows to Linux: inability to connect my laptop wirelessly. I'm currently using an old IBM Thinkpad with an Intel Pentium III, 1.13 GHz with 384 megs of RAM. The wireless is through a Belkin USB dongle (model: F5D8053, v3) and a Netgear Duo Wireless-N Router (model: WNDR3300). Let's say, for sake of argument, I'm using Linux Mint Julia. It clearly must recognize the USB dongle, because it can detect all the other networks in the area, including the Netgear. But it won't connect to it, or any of the secured ones.

So what's the deal? It'll connect when connected directly, so it's not the computer. Or is it? All I know is I'll have to wait til I get an LFC interface (LFC=Long F**king Cable) before I want to connect Linux to the net.

View 5 Replies View Related

General :: Connect To Wireless Connection With Fedora 13

Sep 14, 2010

Tried to connect to my wireless connection (COMCAST wireless router) and while my card was detected, I couldn't use it ('Network' didn't look for any wireless connections). Manually set up a connection with SSID etc. didn't work. My card's a 3COM with NIC (or w/e) of 3C59x.

I downloaded the driver in patch form, but could not patch (command not found). Well, no internet, so I was wondering how I might get the metapackage base-devel, which should enable this command? Icidentally, I can't use gcc or anything either, so I'm not sure if I can build anything from source..

View 8 Replies View Related

General :: Connect To A Hidden Wireless Network On Kubuntu?

Mar 11, 2010

How can I connect to a hidden wireless network on Kubuntu? I have 9.10 64bit installed, and have the information for the network (e.g. SSID and key) because I've already connected to it on Windows.

View 3 Replies View Related

General :: Ubuntu 10.10 Can't Connect To Wireless Internet But Windows Can?

Apr 8, 2011

I have a dual boot laptop. It has both Ubuntu 10.10 and Windows 7 running on the same machine. Windows can connect to the wireless flawlessly, however, Ubuntu seems to be so fuzzy. The first time, it can connect to the wireless internet in the dormitory. The succeeding days, the network icon just keeps on turning as if it's trying to connect. What's wrong? Is it because of the drivers? If that's the case, then why are there times when I can connect to the wireless internet?

View 1 Replies View Related

General :: Connect A Wireless Router To Another Access Point?

Aug 19, 2011

I have a complicated situation due to my goals and network structure. I have in mind a potential solution, a bridge, but I do not know whether it is feasible or what hardware it will require.

The network:

My apartment community provides residents with free Internet access through an ancient T1 line. We do not have the option of other Internet providers, so having a router and modem in the home are not an option. The T1 line is split among some 24 switches, one for each building, and each switch has one port per floor. At each floor, there is a D-link WAP, and each has a separate SSID and WEP key. Additionally, they control access at the switch level using Access Control.

My goals:

I'm used to being in control of my networked environment. I like to have friends over often, and most of them have a laptop, a smart phone, or both, which makes Access Control a pain. I don't want to have to think ahead and get their MAC addresses to the IT consultant while he's here during business hours. My wife and I have 6 devices, two of which require an Ethernet connection.
I use a few applications for streaming that utilize UDP (I'm not sure if the WAPs are smart enough to even handle this) and I don't like having my traffic muddled with my neighbors.

I should note that I tried extending the network with my Airport Extreme router, which apparently only works with other Apple devices. I've also looked into WDS, but that seems to require an unlikely amount of cooperation from the IT consultant on site.

The potential solution: a Linux server that acts as a router. Ideally, it could act as a webserver for a small static site as well, but let's focus on the routing. I'd like to bridge two NICs and use masquerading (Internet Connection Sharing). The public interface would connect to the WAP using WEP. The private interface would allow up to 8 devices to connect to the server.

It seems easy enough to configure the public interface, and even to bridge the connections. What I've never done before is purchase a wireless card that can accept multiple clients. Maybe they can all do this?

View 2 Replies View Related

General :: Can't Connect To Internet Using Wireless On Ubuntu 10.10 Despite Having A Connection

Dec 24, 2010

I would like some help setting up using a wireless connection. I can connect using wired connection, and I have no trouble browsing. I have a strong wireless connection as well; however, when I try to browse I get a server not found error. I did download the necessary drivers. Before that, I didn't have a wireless connection. I was able to connect on this pc before the install, and all other devices still connect using wireless. I have a linksys router.

The one thing that stands out at me is the ip address that it says the wireless connection is using. It says it is 10.42.43.1
I feel like that might be problematic because I'm pretty sure my router only accepts connections with values that are between 192.168.1.100 and 192.168.1.200.

View 12 Replies View Related

General :: Decreasing Minimum Wireless Signal To Connect?

Jul 12, 2010

My box: Dell Inspiron 1545. lspci results below. I have enabled the Broadcom STA restricted driver.Problems:1. I am noticing in Ubuntu (using Network Manager and Wicd) that I am unable to connect to wireless signals tha are very weak. In my other OS (dual boot), I am able to connect to these weak signals.2. And the speed of these networks is much slower, and the disconnect rate is much higher than in my other OSI am THRILLED with Ubuntu otherwise, just looking to fix this issue so I can use Ubuntu as my primary OS.Could this be an Broadcom STA issue, or Software config issue? etc? Obviously not hardware cause hardware is same on other OS.

Code:
~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev

[code]...

View 1 Replies View Related

General :: Connect A Server Using Centos 4.8 Onto A Wireless Router?

Oct 6, 2010

want to connect a linux server using centos 4.8 onto a wireless router. then clients will access mails/internet using the wireless router. how do l go about it. anyone with an example

View 4 Replies View Related

General :: After Lose My Wireless Signal - Can't Connect To A Network Again In Ubuntu 10.10

Jun 8, 2011

I'm running ubuntu 10.10, in a Gateway M-6750. I can't get my wireless to work properly.

After I lose my wireless signal, I can't connect to a network again. I have to restart my computer or, remove the ndiswrapper module and insert it again so that I can connect to the network again.

I do this with:

Also, there are sometimes when the computer freezes up when trying to search for a signal.

View 1 Replies View Related

General :: Wireless On Letux 400 Finds Networks Doesn't Connect

Jan 13, 2010

I bought a Letux 400 mini netbook and it works fine except for wireless Ethernet. It finds wireless networks, including mine, and then pretends to connect, after asking for a password, but finally never connects. I tried reconfiguring the wireless network from g to b/g and finally to b only, but nothing changed. Cable connection works. Unfortunately all relevant Letux Web pages are hopelessly slow and certainly too slow to use the forum and ask questions there. why the thing doesn't connect and how to make it connect? If it recognises networks, shouldn't it be able to connect as well?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved