i have BSNL internet connection . I can connect in ubutnu using usb post but not working in kubuntu anymore i think i dont have the drivers for that ! how do i download drivers ? i have xp , and how can i installin kubuntu ??
View 1 Replies
I've recently set up a local development webserver using Karmic Koala. I downloaded and installed the server version of Kubuntu and have the web server working.
The problem is that for some reason, I'm no longer able to connect to the internet. I can connect to my router, and other machines in my network can VNC into the server.
I'm using an wired connection to the router and have the server set up on an internal IP of 192.168.0.100. I used to be able to connect to the internet, I downloaded and installed a load of packages etc before it stopped working.
The last thing I remember doing before it stopped working was that I installed Samba so I could share files with the other machines on the network (two Macs running Leopard and a WinXP laptop).
I got the share working - I copied a load of files to the server via the share, rebooted, and for some reason now I can't connect to the net (and other machines can't see the Samba share either.) However I can still VNC into the server.
I have recently installed kde and can't find a way to connect to the internet, i have a verizon usb760 modem if it helps.
View 4 Replies View Relatedusing kubuntu 9.04 live cd to see how it works but cannot connect to the internet. I've put in the proper WPA passkey and added the ip address along with everything else and still cannot connect.
View 4 Replies View RelatedI want to connect internet via com port from my mobile phone can any one tell me how can I connect?
View 1 Replies View RelatedI have installed linux 10.10 and i want to connect internet through USB Bsnl EVDO modemprocedure/commands to connect to internet
View 5 Replies View RelatedI have a new clean Kubuntu just installed. I have a wireless router (access point) that I used to connect to internet in Windows 7. I plugged the internet cable into the router, connected computer to wireless network, created a new broadband connection using login and password given by the provider, and internet connection worked. I want eventually to have the same on Kubuntu.
Here are the ipconfig output from Windows with the working internet configuration:
Code:
I want to have the same thing on Kubuntu, but before that I want to be able to have at least the direct cable connection working. Had no problems setting it up on Puppy Linux, but fail in Kubuntu. Wireless connection with the router is no problem, it worked right away.
After plugging the internet cable to the network card I have this:[url] I tried to set up new wired and dsl (not sure which I need, probably DSL as it has the login and password) connections in the Network Connections window but nothing works.
Below are some internet configurations that I guess are needed:
Code:
How can I connect to a hidden wireless network on Kubuntu? I have 9.10 64bit installed, and have the information for the network (e.g. SSID and key) because I've already connected to it on Windows.
View 3 Replies View RelatedHow to set up a bsnl bridged internet connection wth username and password in kubuntu 10.10 ? i tries pppoeconfig but it didnt give me any solution.
View 4 Replies View RelatedI am trying to connect to my linux server using an SCP Key (PPK), but I can't get through using Putty, WinSCP, etc. I think Port 22 might not be open, but I don't know how to open it if I can't at least access the server using SSH.
View 3 Replies View RelatedWhen one should try to connect to port 3306 of particular ip here e.g. 345.56.67.87 it should be redirected to port 3306 of internal machine. This is the scene : How can I access the particular port of the machine which is behind the router . i.e. From out side internet I would like to connect to the port 21 of the machine (192.168.5.8) which is behind router (345.56.67.87) . Here are the details I tried : both side linux (centos)
1.enabled ip forwarding of router (345.56.67.87)
2.enabled ip forwarding of machine (192.168.5.8)
3.implemented some iptable rules: /sbin/iptables -t nat -A OUTPUT --dst 345.56.67.87-p tcp --dport 3306 -j DNAT --to-destination 192.168.5.8:3306
4.iptables -t nat -A OUTPUT --dst 345.56.67.87 -p tcp --dport 3306 -j DNAT--to-destination 192.168.5.8:3306
I tried to google on it mainly it dealt with the iptable rules. of which i applied but error is" can not connect to the port 3306 of 192.168.5.8"
I have to connect from my linux client laptop to SPARC machine by using roll-over cable and RJ45 interface on the server. On windows I always used Tera Term but don't know how to accomplish this task from linux laptop.
Is there some kind of app like TeraTerm on linux too ?
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI bought a HP2133 mini note pc which runs on linux. I have never used it before so i'm unsure about it, but i've done the basic set up on it but it's won't connect to the internet!
View 1 Replies View RelatedI'm running ubuntu 10.4 on my desktop but I can't connect to the internet .I'm using mobile broadband vodafone vmc lite which is a huawei modem.The disc icon is on the screen and the auto run software is there but when I try to run it ,it says error can't find autorun and cant find media/my dischelper. exe.zip period. I'm writing this on a different computer by the way.
View 7 Replies View RelatedAfter being fed up of all the problems I have had with Windows, I have just installed Mandrake Linux and everything seems OK apart from the fact that I can't connect to the internet. I presume it's because I have not got the relevant driver (or have not configured it if it's there) My machine was previously running Windows and all the disks I have are for Windows.
I have looked in my manual and it says I have a K8NBP GRAND (I think that's the motherboard, you'll see that I don't really know a lot!!) The manual also says Gigabit Ethernet LAN : NVIDIA Gigabit MAC + VITESSE Gigabit PHY - Supports 10/100/1000Base- T Ethernet/Fast Ethernet/Gigabit Ethernet. When I was running Windows I just had a network cable running out of the back of the PC connected to one of the LAN sockets on my router. I am currently having to use my wife's laptop (which runs on yet another OS but at least it connects to the internet or I'd be really stuffed).
I suddenly cannot connect to the internet from work and at home with my laptop. Both ethernet and wireless won't work. I still get an IP address, and can also ping it, but cannot ping other addresses. What befuddles me that it happened today at work and at home, that it worked fine at both places before, and that I just connected to the internet yesterday at an airport. I have not installed any new programs, nor have we changed our internet provider etc. My girlfriend's laptop (Windows -- gnnn) still can connect to the internet without problems.
View 8 Replies View Relateda friend of mine recently wiped my computer (windows XP) and installed Linux. The internet provider is Comcast cable. I have not ever had a problem connecting w/ windows XP but now I can't connect to the internet.I've spent hours on the phone w/ IT at Comcast and they tell me that I have connection to their modem and I also have a valid IP number. They seem to think that it could be something as simple as a setting, somewhere in the program and advised me to contact Linux for a solution. I am anxious to use Linux as my friends rave about the performance and all the 'bells & whistles' so the speak.
I have since, reinstalled windows XP (because I need to use the internet a lot, but can't get connected to the internet with it either.Again Comcast shows that I have connection to their modem and I have a valid IP address, but still can not connect to the internet. They seem to think that since all other variables remain constant except for the installing of Linux that the problem lies somewhere in that install.
I have just finished installing Fedora 10 on my machine and I have it connected to the internet via ethernet cable. The problem is it wont connect at all for some reason.
I click on the green Activate button in network configuration to see if it does anything but I keep getting this AVC denial error. I don't even understand what the problem is:
http://img59.imageshack.us/img59/3789/72645136.png
So I play around in the settings and put this SELINUX thing to permissive but the thing still pops up, so it didn't help:
http://img696.imageshack.us/img696/4697/82520734.png
The only other thing I messed around with is the DNS server; I put two DNS servers in those boxes, and I got those from the people in charge so it shouldn't be wrong.
I have a problem with my system with Ubuntu 10.04 UNR not being able connect to Panera hotspots.
View 1 Replies View RelatedWhen using Fedora in VMWare, sometimes I can connect to the internet and sometimes I cannot. I do nothing differently on different days. I restart the machine and / or shut the machine down at the end of the day. When the machine starts back up the next time, I might have an internet connection or I might not have an internet connection. The 2 computer symbol that appears in the top will also sometimes be displayed. If I have that icon and click on it, it will display connections I can use including a sys one. I have a bridged connection chosen in VMWare also. Furthermore, when I click on the System -> Administration -> Network Device Control, 'eth0' is listed and it is listed as 'active'.
Yesterday I could ping out to a specific ip address on our network ( 192.168.1.xxx ). Now, I cannot ping that same ip address. I receive an error 'Destination host unreachable'.
How can I make it so that I have the internet connection every time I start up the machine? What do I need to check as far as the internet connection goes and the network connection?
I have an Internet connection problem. The computer I'm using which is running Red Hat Enterprize Linux Server cannot connect to Internet. I can ping machines working in our local network. Static IP addresses, DNS, Default Gateway, Subnet mask, they all seem to be correct. I restart network interfaces but that doesnt make any difference. Other machines in our local network are connecting to Internet without any problem.
View 2 Replies View RelatedI have redhat linux installed my PC but I am unable to play MP3 also I am not able to connect to internet.
View 9 Replies View RelatedI have an acer aspire one which will not connect to the Internet i have a full wifi connection but when you click the browser button it looks like it trying to connect but nothing. i,m not very computer friendly so i have no idea what to do
View 14 Replies View RelatedI burned the Knoppix ISO to a DVD in roder to boot my comptuer which has BSOD problems...
I've been told a couple of solutions that I couldn't access due to safe mode just going into a BSOD.
So I found Knoppix and it's great. but it won't connect me to the Internet. I use a router and it detects the connection i use. I click on it and type in my WEP key which I know is correct and it tries connecting. After a few seconds the screen pops in again asking me for my WEP key again.
Anyone know how I can connect to the Internet?
I am unable to connect to the internet. I have Motorola Netopia DSL (NO router) and can't connect to the internet in ANY linux distro (openSUSE, fedora, slax, mandriva, simplymepis, mint, dreamlinux, ubuntu, ubuntu studio, artist linux). The only linux distro that works right away is backtrack linux 3. All other distro do not work including new back track linux 4 because in version 4 they switched to debian. My ISP is Bellsouth and they do not want to cooperate. I was told they do not support linux.
DSL shows internet and activity lights green but it does not connect.It seems to me problem is in eth0 because when I go to terminal and ifup eth0 it gives me can't assign requested address. I have dynamic DHCP and can't assign static address.I have 2 questions:
1.- How to connect to the internet?
2.- As I said above backtracklinux 3 works out of the box but doesn't have flash.How to install flash in backtrack linux 3 so I can play chess on Yahoo games and [URL]?
I run all linux distros from live CD/DVD from external DVD drive except fedora which is on C: drive.I did try to run already network devices, dsl configuration without any results If I can go to my modem thru browser address 192.168.1.254 I would be able to solve the problem but I always get message can't connect to server.
I just installed Debian 6.0.1a on an old laptop (Dell Inspiron 6000) and I can't get it to connect to my wireless internet.I installed Ubuntu 10.04 on a separate partition on the same machine, and it has no problem connecting to the internet.
View 6 Replies View RelatedI have lg cookie GD510 mobile and i want to access internet via mobile in red hat...my /etc/wvdial.conf file is
[Dialer Defaults]
Modem = /dev/ttyUSB0
Baud = 460800
Init1 = ATZ
[Code]....
For how long I have suffered with ms. I have installed a couple of Linux versions 7-10 years back,and did not get very far with them, am still a newbie when I look at some of the stuff in Linux, but am willing to learn and am totally converted.
Am running
Laptop HP Pavillion dv6000
Mint 2.6.31-14 Generic
Modem Huawei E220
I have downloaded 9 files from: source code, exe x2, makefile, txt,and 2 shell script files. The exe files give me the msg "could not display file name etc" There is no app installed for exe files What dont I know and where can I find it. Would it be easier to take the machine to an internet cafe and plug in a cable to get it online, atm my other machine is a eee pc windows 7 starter and it has some weird stuff going on, says it has over 10 viruses? Anyway cant wait to get this over to Linux too.
i'm using toshiba laptop, i need to connect my lap to internet but i didnt found the linux based drivers for realtek ethernet.
View 2 Replies View Related
