I am trying to connect to my linux server using an SCP Key (PPK), but I can't get through using Putty, WinSCP, etc. I think Port 22 might not be open, but I don't know how to open it if I can't at least access the server using SSH.
View 3 RepliesI want to open 177 port of remote server for mypc.com.
Code:
-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 177 -s mypc.com -j ACCEPT
I wrote this at iptables, but I could not connect mypc.com with remote server.
Kindly let me know what I am wrong?
If I forward port 80 to port 3128 for squid with an iptable rule, does port 3128 have to be open on the firewall or is this all routed behind the firewall?
View 4 Replies View RelatedI have sendmail running on my centOS 4.6. My lamp server also runs on it. I want to send mail through php mail function. when i execute php page, which fires the mail function, it takes so much long tim1 say even 1 minute, and at last displays that message sent successfully. Suppose, destination address is [URL].... I did not get any mail there. My server is running in LAN. I checked the status of sendmail, it shows me that it ios running. when i issue "nmap localhost" it shows me that SMTP port 25 is open, but when i issue "nmap myserver" (192.168.1.20 myserver ( written in hostfile)), it does not show that SMTP port is open.
I checked the /var/log/maillog, one person in my previous post advice me to see that. There it shows that message is accepted for delivery...but i do not get any mail in my destination, even not in spam folder. One more confusion is that, in my case my server is in LAN and if I am at all enable to open the SMTP port on it, does i need to open SMTP port on my router (which connects my LAN to internet) also needs to open? I think no, because SMTP is application layer protocol, it will wrap my mail in IP packet, which router just need to forward. am i right?
I am running lmgrd on CentOS5, but it returns Failed to open the TCP port number in the license. The port is 27000, how can I open that port?
View 5 Replies View RelatedI have a server which I need to connect to and run a graphical program on. I know that you can do this with Open Text Exceed, but it's been years since I've done this and the last time I did it was on version 9. Unfortunately I only have a license for version 14 now and have no idea how to do this. how I can use Exceed to connect to my linux server?
View 1 Replies View RelatedI am merely trying to change the port for my ssh server.However it isn't changing.I edited my ssh_config file to:
Code:
# This is the ssh client system-wide configuration file. See
# ssh_config(5) for more information. This file provides defaults for[code]...
When i try to connect to my server via port 443 i get a connection refused error. However when i try to connect via port 22 it connects. Since that didn't work, i tried restarting the entire server.To restate, i changed the config file and restarted ssh then the computer, however the port didn't change.Ohh and yes my router is set to port forwarding on port 443, though it doesn't matter since I'm inside the network.
I have Linux server (centos) in my company ,In Server have two Ethernet card we are using one for getting internet connection via eth0 and another one is passing network is shared through this ethernet eth1.Network is shared through this linux squid proxy server to Windows client .But thing is In Windows client Browsing internet via proxy is fine . But while ping google.com in cmd it say could not connect.
View 2 Replies View RelatedI have Linux server (centos) in my company , Network is shared through this linux squid proxy server to Windows client .
How to open port 995 and 587 for Windows client because Outlook are not working in Windows Client ...
How to open this port for Windows Client.
when i fisrt signed up for this forums i accidently posted this same topic in the first place i found apropriate(network/wirless) and i just realised i didn't look hard enough so i marked my old post as solved, please admin delete that one. ubuntu server 10.04 LTS running ubuntu desktop on top(for my lack of skill)ok nitty-gritty. i have been learning to use linux for a few months now and i like it but i cannot access my server through WAN on any ports, yes i have them all open and enabled and associated on my router properly. i even tryed turning off firewall on here and i have tryed a list of misc. things. is there something i am not doing that one might initialy do when first starting an ubuntu server?
View 9 Replies View RelatedVERY new to linux, erm but I have an issue that needs solving!I recently moved to university, where their network blocks sftp port 22, this means that I cannot connect to my FTP server which is running a version of linux.Now I've got this ftp server connected to a seedbox and it was created using the following walk through..Code:I have written this guide for a friend, but I though it would be useful for others as well.
There are several guides floating around, but I found that most always cock up in some way. This one is tried and tested to work on Debian Etch (on an OVH rps, but should apply to most servers).If there is a new stable release of rtorrent/libtorrent then I will update this guide to show you how to update it (without reinstalling the whole server).
At the bottom there are also instructions to install ftp access & some network monitoring software.Basically, I would really like someone to be able to construct the commands on how to change the listen port for sftp connection on linux or add another port to the list that Linux would use so that I could put in through putty.
Wow, don't know why I seem to have so much trouble with this ftp stuff. I have so start all over a few times, reinstalling Lucid Lynx destop all over, and adding the needed files to make it a server. I am just trying to do something simple for now- just having a localhost server environment to develop my joomla website, and later on host it from my server 'out there' (I already have a domain name and dynDNS service with nameservers etc. but don't want to do that yet, as I have in the past with my router forwarding port 80, and actually got hacked! so I don't want to do that again until I learn more about security) My problem right now is that I can't even get the localhost ftp to 'connect to the server'. i know the host name (localhost) and username/password that I set when I set up Lucid Lynx, and I'm sure that is what I use for the ftp usernamepassword, host etc. And I put port 21 for the port. I see from 'Shields Up' that my port 21 is closed. So I followed advice on a thread and entered a few commands in the terminal to ad iptables etc. But still, port 21 is closed and I can't install components with the Joomla installer in admin's backend. And I can't use fireftp to even change permissions in my local folders. What do i do next, open port 21 somehow? I saw a terminal command about opening port 21 that was simple but I forget it.
View 2 Replies View RelatedI've got a server listening on a port. when I stop the server the port stays open for some minutes. How can I close it immediately?
View 2 Replies View RelatedOur DBA has an application running on Server2 which needs to connect to Server1 (Linux OEL5.5 server) thru port# 9171. I use telnet to test basic connectivity.What should I do on Server1 in order to open up port#9171 for connection.
View 4 Replies View RelatedI have 2 server behind the netgear router on my network . win2k3 and CentOS development server, I have port forarded 80 to win2k3 server which i can access over the internet and is accessable. However I can SSH CentOS machine and portforwarded 8080 and 82 for web access, I can't access via any of the port, browsers says UNABLE TO CONNECT.. there is no firewall in CentOS machine.
View 1 Replies View RelatedI'm trying to open up some ports to connect via vnc to a server running Centos 5.5. I've edited /etc/sysconfig/iptables everything *looks* fine, but I still can't seem to get access to the port I've opened (I added some newlines for clarity between commands):
[Code]....
I hear that it's a bad idea to edit iptables by hand.
I want to open 443. Quote: iptables -A INPUT -p tcp -m tcp --sport 443 -j ACCEPT
iptables -A OUTPUT -p tcp -m tcp --dport 443 -j ACCEPT
Since I'm not at the box, I can't use the nifty GUI.
How might one do this via terminal?
OS: CentOSv5 (RHELv5)
i have centos5.3 installed with iptables firewall, i want to open port 5222 as i want to access application which uses port 5222 from internet.
View 14 Replies View Relatedfrom my windows box at work i can only connect to some ports (pop3, telnet, web)also, i can connect to port 1234 (as an example)everything else is blocked.I'm trying to connect with Microsoft Terminal Service Client to my linux box (cant install any vnc)but haven't found a way to make Gnome remote desktop to listen to the port i need (1234).I'm using fedora 13.anyway, i would appreciate any advice on what software to use or hot to configure my Linux box get remote connections from windows box on that certain port.
View 5 Replies View RelatedI've been trying to ssh out of my home network to school computers and I keep getting:
ssh: connect to host sage.math.washington.edu port 22: Connection timed out
I've tried this on my machine (running Ubuntu 10.04) and on a windows 7 machine (using putty). I have been successful ssh'ing to this machine using either of the laptops from every other network I've tried, so I'm pretty sure it's something about my home network.
Made some network and hardware changes, and now I can't get the mailserver to work. It seems that sendmail can't loop to itself on 127.0.0.1. When I nmap localhost, I find that port 25 isn't open.
Naturally, nothing has changed on my system except for different routing, interfaces, etc.
So the question for sendmail gurus,is where should I be looking?
How to open port at iptable?
My box is centos 5.4.
I wanto to open UDP 177 and TCP 6000~60010.
I can connect my box through putty now.
I want to open port 2700 on my firewall but I don't know how I try with Code:iptables -A INPUT -i eth0 -p tcp --sport 2700 -m state --state ESTABLISHED -j ACCEPT But the port is not open I see the firewall configuration with the command setup . I use CentOS 5.3 here a screen of my configuration :http://upbg.net/out.php/i3537_sshot3.pngCurrently my firewall is off because I don't know how to turn on 2700 when the port is open I will turn on firewall .If I write 2700 in other ports field will 2700 be open ? Before 1 month I try but the port was not open . I have only 1 last question will firewall reduce the load of the my server now mysql use many CPU % and I just don't know why
View 14 Replies View RelatedI wonder how can I only open 1 port out of this two on my CentOS Machine:
Code:
[root@389-ds ~]# netstat -pant | grep "ns-slapd"
tcp 0 0 :::389 :::* LISTEN 7956/ns-slapd
tcp 0 0 :::636 :::* LISTEN 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.142:4806 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.142:4805 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1699 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.47.177:4986 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1698 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1697 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.47.177:4985 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.146:1701 ESTABLISHED 7956/ns-slapd
tcp 0 0 ::ffff:10.209.37.91:636 ::ffff:10.209.37.142:4808 ESTABLISHED 7956/ns-slapd
[root@389-ds ~]#
I have Fedora DS Installed and when I a trying to access through the client ldap:// is working but not ldaps://
I am trying to open the telnet port on my system with port 4100 and for the same i have inserted the entries in iptables file using below command./sbin/iptables -A INPUT -s 132.186.208.83/24 -p tcp �-dport 4100 -j ACCEPT.
View 1 Replies View RelatedHow We can Open PORT 2095 IN linux
View 3 Replies View RelatedOn my RedHat 9 , I want to open tcp port 4965 but my server does not contain /etc/sysconfig/iptables . Can you please let me know how to open this port?
View 6 Replies View RelatedI heard when running Ubuntu I need to set it to open with one port. I had a friend ran Ubuntu on his laptop at school and had other Ubuntu users at school got access to his computer, is that possible?
View 2 Replies View RelatedRunning openSUSE 11.2 x86_64.Here's what a nmap of my IP provides:
PORT STATE SERVICE
23/tcp open telnet
80/tcp open http
[code]....
I want to open the port 18680 on my remote Fedora 14 machine. I didsudo iptables -I INPUT -p tcp --dport 18680 -m state --state NEW,ESTABLISHED -j ACCEPTsudo iptables -I OUTPUT -p tcp --sport 18680 -m state --state ESTABLISHED -j ACCEPTsudo service iptables saveThe status returned is OK.I have also opened the port on my security group on Amazon. Also, I rebooted the machine.When I use the browser to view the application running at port 18680 the browser cannot connect.
View 1 Replies View Related