General :: Can't See The Second Internal Harddisk?
Mar 12, 2010I have a new Ultra 27 running debian and i cannot see the second internal harddisk any ideas what to do to rectify this.
View 4 RepliesI have a new Ultra 27 running debian and i cannot see the second internal harddisk any ideas what to do to rectify this.
View 4 Replieshow can I clone my installed ubuntu to a new harddisk? with 32bit ubuntu I have used:tar cvpzf -> create a tar file on my external nas system. after that I have done a restore tar xvpfz - worked with 32 bit.
Alternative I have mounted both disks and via another linux partition I have used:
cp -rvbdR /source/* /target
both methodes worked with ubuntu 32 bit. With 64 bit ubuntu I can NOT get it to work. error message after booting the clone: /var/lib/gdm/.ICEauthoriy ..
I can see that /source/var/lib/gdm has different rights as /target - will be part of the problem.
This did not happen with the 32 bit ubuntu - but why ?
I just bought a western digital of 3 TB. Unfortunately Gparted gives error. Gparted can create a about 2TB+1TB, but when it is the whole disk, it does not work.
I tried JFS and EXT4.
My kernel is code...
I have a 60GB hardisk, and try to install CENOS 5.5 HEL5.5 and Fedora13 on it. I partitioned the harddisk to 4 primary partitions like below:
Partition MountPoint Type
sda1 /boot ext3
sda2 VGRHEL LVM PV
sda3 VGCENT LVM PV
sda4 VGFEDORA LVM PV
I created 3 Volume Groups as you see up: VGRHEL, VGCENT, VGFEDORA; under every VG, i created 2 logical volumes ,just like below: VGRHEL=LVRHEL00(swap) + LVRHEL01(MountPoint: /) Below VG try to partition them the same as VGRHEL too. VGCENT=LVCEN00(swap) + LVCEN01(MountPoint: /) VGFEDORA=LVFEDORA00(swap) + LVFEDORA01(MountPoint: /)
I successed installed RHEL5.5 on VGRHEL, but when i try to use the same way to install CentOS 5.5, i got below error infromation: "Bootable Partitions cannot be on a logical volume" I don't why this happened, VGRHEL has logical volume too, but why i can install RHEL on it successfully.
during moving my root partition, i used the old grub and installed the old grub on harddisk:
grub
grub > setup (hd0)
now how could i install GRUB2 on harddisk?
I was reading through the link on journaling-filesystems and i would like to know where exactly is the journal stored in my Harddisk.
View 1 Replies View RelatedI tried to format my harddisk (160 GB) with the following command
dd if=/dev/zero of=/dev/sda
After some 3 hours, following error came up:
dd: writing to '/dev/sda' : No space left on device
312581809+0 records in
312581808+0 records out
160041885696 bytes (160 GB) copied, 10708.3 s, 14.9 MB/s
For whatever reason /dev/sda3 (at /tydelik) does not mount itself (like all the other partitions) when the system reboots.
In YaST's expert partitioner it says that:
Quote:
An asterisk (*) after the mount point indicates a file system that is currently not mounted (for example, because it has the noauto option set in /etc/fstab).
Here is the /etc/fstab :
Quote:
I don't see a noauto option. Is it hiding somewhere?
Also, if I say the following then it seems that /dev/sda3 is ext2 and not ext3 (as YaST says).
Quote:
Firstly, how do I specify /dev/sda3 to be mounted by default (because I thought it would unless there is a noauto specified), and secondly, why is YaST not showing the same settings as when I say "mount" ?
As i said in title, we need to erase all datas from harddisk before distroy our old servers.
Quote:
dd if=/dev/zero of=/dev/hda bs=1M
Quote:
shred -fzuv -n 100 /dev/hda
1. Which is the best practice to erase data, dd or shred?
2. How can i execute these commands in running server, do i need to re-boot the servers as RESCUE mode using bootable cd?
I am using ubuntu but I am reading a windows harddisk via USB.Apparently some files does not appear and it cannot read zip files.
View 4 Replies View RelatedI have tried mkfs.jfs but well not working.... The hardisk is bit getting old ...
I have tried gparted but it doesnt do that.
I have suse in my PC. I want to format my harddisk completely and install suse again.How can I do this. I have the linux OS CD with me.
View 2 Replies View RelatedI have just reinstalled Centos 5.3 on a new harddisk. I would like to copy some files from another harddisk which is also install with Centos 5.3. I have followed some guide in the internet but failed to mount the old harddisk. I got "unknown filesystem type 'lvm2pv'" error when trying to mount /dev/sdb2.
Details:
I am using virtualbox to run windows xp.is there a way to access the harddisk occupied by linux and copy the information to the virtual memory in windows xp
View 3 Replies View RelatedI have been working with dualboot XP and ubuntu on my laptop and screwed the system completely. No matter what I do I get the message "Operating system not found".I also have been trying with, super grub disk, without success.
My question: Can I solve the problem with a new or a blank Harddisk?
I am trying to port the current Fedora4 system to the CentOS5 on a new harddisk. Actually, the Fedora4 system is constantly being hacked due to my lazy update. So i prefer a fresh install of CentOS5. I am not clear what files need copy and what does not need for ease and for avoiding possible backdoors. Kinda a big problem,
View 4 Replies View RelatedI have a Western Digital My Book World Edition external harddisk with blue rings. I filled it up and now want to delete the data and start over. I'm set in my ways and have been accustom to reformatting harddisks periodically (sector maintainance, etc.) It's worked for me as I've luckily have not had a disk crash in 25 years.My webapp is not helping me with the reformat and neither is Western Digital tech support. I've heard that it was factory formatted with something called Linux ext3. Does this make sense? Has anyone had any experience with reformatting external harddisks being used as a NAS (home use).
View 3 Replies View RelatedWe have a target board with intel atom processor(COM). OS : Ubuntu 9.04 But I am not able to hear the Internal speaker sound. ->pcspkr driver is present. ->Different tests were conducted inclding echo -e "a" , console-beep package ,writing to the port etc. ->Sound is not heard during system startup also.
View 4 Replies View Relatedim having trouble in installing dual os in my laptop. i'm currently running in windows 7, how come I can't detect my internal harddrive. when i tried to install Linux the external harddrive was recognize.
View 14 Replies View Relatedi bought a liteon 18x internal dvd rom and i dont no how to make it work with linux i dont no anything about linux husband put it on computer for me and now we are apart.
View 2 Replies View RelatedWhat happen internally when we insert the floppy into the linux operating system? Who will take care of making the entry in the /etc/mtab, etc. Tell me whole internal operation of the kernel when we insert the floppy.
View 5 Replies View RelatedI'm having the following error when I try to mount nfs: "nfs.mount internal error".
View 4 Replies View RelatedI have just installed ubuntu 10.10. I had about 270Gib available free to install ubuntu 10.10 on, but after the installation I can see only 141Gib ? how can I get the rest of the free harddisk ?
View 7 Replies View RelatedI would like to install ubuntu 10.04.2 LTS in my desktop-pc. It boots, I select time zone and keyboard layout, but then it could not see my hard disk, so i cant go further.
But i can see the disk in console while typing:
Code:
# sudo fdisk -l /dev/sda
and I can also make changes in disk such as deleting all partions etc.
I'm using the mail command and I am able to send mail to my gmail account with out any problems. However when I send mail to deco -at- mycompany.com I nothing happens and no mail ever arrives in my mailbox. It might be worth mentioned that my centos5 is a virtual machine on the same server as the company exchange mail server.
View 1 Replies View RelatedI just setup my first Linux box using [URL] everything went along fine except now I have a problem that I cannot seem to solve. I've set up a webpage on the box for my company's intra-net for testing purposes but I cannot get the links to work. On the server itself all the links work but Firefox still ask me to authenticate with the Adobe Flashplayer (player10), but when I access the page from another computer I have the following issues:-
1. Even though hostname -f shows the a fully qualified domain name I have to use the IP Address eg. 192.168.100.100
2. I can access the page but the links leading to the other pages do not work I get "Webpage cannot be found or the HTTP 404 Not Found" Error Message
3. None of the embedded pictures show up I get the red X.
I Just want to like if my system has internal speaker present or not , i'm using rhel4,i don't get any beep sound at the time of my booting,here's my some observation i made in my system
Code:
[root@malick ~]# lsmod |grep snd
snd_azx 21841 2
[code]...
I have a (virtual) server with 3 NIC's: 1 external (inet), 1 local and 1 DMZ. This server is my gateway.
I would like my internal network, where every server has a static 192.168.0.x IP, to access the internet via the gateway.
That means the traffic has to pass from the 'local' NIC to the 'external' NIC, connected to the internet.
Which setting do I change to accomplish this ?
Please check the sceenshot (attachment) for my current setup
I am tired of managing local Address Books and Calendars. I use either POP or IMAP email accounts now and want to keep the email accounts I have. What is a good Mail Server I can setup to Let me use a Global Address Book and Shared Calendar System between Outlook 2003 and Evolution, but not create email accounts? In Other words I want a Local Server I can setup that does nothing but manage a Global Address Book and Calendars. I want to keep using POP and IMAP accounts for the email side of things.
View 1 Replies View RelatedIs there any way to avoid internal and data fragmentation?
View 5 Replies View Related