I have an older RHEL 3 server that is running nfs v 2. I have a backup appliance that I need to mount to it, but the appliance is only compatible with nfs 3 or 4. i cant mount it to my RHEL 3 box. I have searched redhat and can't find an rpm to upgrade nfs on this box. Does anyone know if there is a way i can download the source for nfs 3 or 4 somewhere and then compile it on my RHEL 3 box?
View 10 RepliesI wanted to Upgrade from Fedora 13 to 14 and downloaded the Upgrade Image using the Pre_Upgrade Installer. My system downloads the upgrade just fine but when it starts to perform the it asks for the location of the new Fedora 14 ISO and I have no idea where that is or what to enter as a possible location which I have no doubt is in the default area.
View 3 Replies View Relatedi just jumped into linux with both feet not having a clue what im doing.. loaded ubuntu 10.10.. liked it but i couldnt get stellarium to work with my ati x1300, so i upgraded to 11.4 and it works fine.. problem is.. i have a applications start on the left side, but i cant seem to find the setup like in 10.10 at the top, where you can go to terminal, admin, synaptic, etc.. the only way i found synaptic was trying to download it and asked me if i wanted to keep it in the bar, so now its on the left, but cant find anything else.. ive been trying to find it on the net but 11.4 seems to be so new that there arent very many faqs or tutorials about it..it would be nice if i can get that stuff back without having to format and reinstall 10.10.. im not going back to windows.. so i might as well figure this out..
View 2 Replies View RelatedI am trying to upgrade from Fedora 12 to Fedora 13 using "Preupgrade" but it fails in the last part and tells me that the system cannot find the previous system (fedora 12). I have tried to do the upgrade several times and always the error is the same.
View 3 Replies View RelatedI dual boot Ubuntu 9.10 and Windows XP. I booted into Ubuntu 9.10 and upgraded to 10.4 and upon reboot Ubuntu could not find the boot partition, it reported only /dev. I restarted my pc and and selected Windows and, fortunately, I was able to boot into that OS.
View 1 Replies View RelatedI would like to upgrade from Opera 10.10 to 10.60. I can't figure out how to do this. I thought it was supposed to give me the choice to make a fresh install or upgrade, but there is no such thing that I can find. I have looked on the Opera Downloads page and on the Synaptic package manager page. Neither of them give me the option to upgrade, only a new install. I would like to keep my old preferences, passwords, etc. I need to upgrade to fix the problems with unresponsive flash players (....., etc.)
View 5 Replies View RelatedI recently upgraded from Ubuntu 10.04 to 10.10. All was going well until netbeans started throwing up errors about not being able to find the "stddef.h" header being called from the stdio and stdlib headers. Now I am unable to even initialize variables without failing.
I was using 6.9.1 from the netbeans website, but then I installed 6.9 from the repos alongside, and I still get the same error. Do I need to remove 6.9.1 ( I would rather remove it and keep the repo version), and if so, how do I do it?
where the stddef.h file is located so that I can replace it, or know of any work around?
I have a Samsung SCX-4200. It was working pretty good with sane 1.0.21. I'm using slackware current, keeping updated (almost) every day. On the Mon Feb 28 update sane was updated to sane-1.0.22-i486-1. After that update xsane (as user) cannot find my scanner. I was able to find it running sane-find-scanner as root, but scanimage -L (as root) wasn't able to find the scanner. Now I have updated to the last sane package, named sane-1.0.22-i486-2 . In the changelog I can see that this rebuild should add libusb support.
In fact, now there's no way to find the scanner. And now also sane-find-scanner (as root) is no more able to detect the scanner, also running the command as root. I've tried running sane-find-scanner -v -v and scanimage -v -v -L but I can't get no useful hints. I have checked the sane configuration files but always seems good (the row with USB IDs is not commented in the backend file, which is xerox_mfp, and the backend is listed in dll.conf).
I try to do a upgrade on my fedora 6 ill 10. But when I try to write yum update or yum upgrade on my server a get this error:
yum update
Loading "installonlyn" plugin
Setting up update process
Setting up repositories
Error: Cannot find a valid baseurl for repo: extras
Seen this posted several times, currently running F10 and cannot upgrade to F11 as it does not find the hard drive.
AMD 64
SATA HDD
Used these boot options: acpi=off pci=nomsi
I recently upgrade from 11.3 to 11.4, KDE 4.6.1. I have /home on a separate partition and it was unchanged in the upgrade. If I open Personal Settings-Application Appearance-Fonts, one of my font choices is Adobe Helvetica. If I open Gimp, open a new file, I can select Adobe Helvetica as a font and insert text in my new file. If I open Inkscape (svg drawing application), I can select Adobe Helvetica as a font, text is inserted but when I reselect it for editing, the window indicates that the font is just Sans. (Inkscape has some font selection wierdness, but keep reading). If I open LibreOffice, Adobe Helvetica is NOT on the font list for selection.
If I run
Code:
fc-list |grep Adobe
Adobe Courier:style=Bold
Adobe Utopia:style=Italic
Adobe Times:style=Bold
Adobe Helvetica:style=Bold Oblique
Adobe New Century Schoolbook:style=Bold Italic
Adobe Utopia:style=Bold
Adobe Utopia:style=Regular
Adobe Helvetica:style=Oblique
Adobe Courier:style=Oblique
Adobe New Century Schoolbook:style=Italic
Adobe New Century Schoolbook:style=Bold
Adobe Utopia:style=Bold Italic
Adobe Times:style=Regular
Adobe Times:style=Bold Italic
Adobe Times:style=Italic
Adobe Helvetica:style=Bold
Adobe Helvetica:style=Regular
Adobe New Century Schoolbook:style=Regular
Adobe Courier:style=Regular
Adobe Courier:style=Bold Oblique
However, I cannot find any files named Adobe Helvetica or Helvetica in /usr/share/fonts/* and I am not really sure it is installed. My suspicion is that the upgrade process preserving /home has the system looking at some old information, and that gimp and Inkscape are doing font replacement, while LibreOffice is doing it's own thing. What is the best procedure to refresh the system info on what fonts really are loaded?
I have two laptops, both with broadcom drivers and in both it's working pretty well with my university network but I can't find my home network on the list (I can see my neighbours network). It was working perfectly before the upgrade, and of course, I can connect on windows to my home network.
View 2 Replies View RelatedI thought I would try out Eric's KDE 4.5.1 and Robby's new Xorg pacakges. The upgrade went off with out a hitch, but now when I try to launch conky I get
conky: error while loading shared libraries: libmowgli.so.1: cannot open shared object file: No such file or directory
So I rebuilt conky and reinstalled libmowgli ran ldconfig but I still get the error.
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
I want to upgrade to Meerkat from Lucid but am unable to find the upgrade in my Package Manager.I have been receiving and installing regular updates recently so I don't think there is any problem with receiving notice of updates other than the Meerkat update.Did notice that my packages have not been updated in 46 days.how to update the packages if it is.
View 5 Replies View RelatedI have 4 Linux machines with cluster.My target is to find all kind of IP address (xxx.xxx.xxx.xxx) in every file in the linux system remark: need to scan each file in the linux system and verify if the file include IP address if yes need to print the IP as the following
more /etc/inet/file.example1
182.23.2.4
255.255.0.0
10.10.1.1
I am trying to do a find/grep/wc command to find matching files, print the filename and then the word count of a specific pattern per file. Here is my best (non-working) attempt so far:
wc `find . ( -name "*.as" -o -name "*.mxml" ) -exec grep -H HeightResizableList {}` ;
Is there a way to specify to find that I only want text files (and not binary files)? Grep has an option to exclude binary files, so I thought find probably has a similar feature, but I've been unable to find it.
View 2 Replies View RelatedI've got a setup where I need to use 'find' to find 0 or more files in a certain directory, however, 'find' always produces an error when there are no files that match a certain check. Is it possible to run 'find' while having it omit errors when no files match the pattern?
View 2 Replies View RelatedI have used diff command in past.I faced a situation to which I did not had a cluehere are some text strings (which can be stored in a file)Quote:
CONFIG_XEN=y
CONFIG_XEN_PVHVM=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=128
[code]...
I am attempting to upgrade Fedora 12 to 13. I get an error screen that said root could not be found. Four options are given. Not sure exactly their wording, but two appear to allow you to cancel the other two warn that if you reinitialize you will wipe out all data.
I have a Vista partition and a Fedora partition. I've added the vista ntfs partition to fstab with no help. All of the partition use the long UUID form. I added the root location (root (hd0,5) to the upgrade menu item in grub.conf and that didn't work either.
I'm reluctant to proceed for fear of initializing the entire drive. I could live with installing Fedora 13 over the existing partitions.
I know how to search for normal files but can you let me know " How to search for 5 setuid files on the system. Also explain, for each file, why setuid mechanism is necessary for the command to function properly"
View 1 Replies View Relatedam new to linux and trying to find a file in sub directories using find command as:find .-name *.jpg -type fBut I am unable to get the result as find command is not permitted by the server administrator.Is there any way to find files without using find command.
View 14 Replies View RelatedI just upgraded my laptop (thinkpad T61) OS from Lenny to Squeeze. Everything worked fine out of box except I found when I use pcmanfm or nautilus, I couldn't locate the cursor focus by typing a letter that a filename begin with. It is something I used heavily everyday and I just couldn't lose it. Since it failed in both pcmanfm and nautilus I think it might has something to do with Squeeze.
View 2 Replies View RelatedI want to upgrade kernel to 2.6..36 from 2.6.18 of CentOS 5.5. The make process is successful but prompt "could not find filesystem /dev/boot " after reboot.
Some articles suggest to edit file .config and set CONFIG_SYSFS_DEPRECATED_V2 to 'y' and re-make kernel. However, the problem still stand there after reboot again.
I keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
I am not completley new to linux, I have tried a few variations, but I can't seem to find the right fit.
Can someone tell me: What, if any, is the best Distro for someone with no Internet.
I have Dial-up at home, but it is capped at 20hrs a month, and download speeds of 5Kb/s MAX.
Can sonmeone help, or should I just get an upgrade?
Is it possible to fully enjoy Linux without the Internet?
I have a project directory that contains source code and subdirectories of source code. I want to use the Unix program find to search recursively for the names of files of certain extensions. The versions of find on Linux and Mac OS X behave differently.
# Works in Linux
find . -type f -regex ".*.(py|html)$"
# Neither of these works in Mac OS X
find . -type f -regex ".*.(py|html)$"
find . -type f -regex ".*.(py|html)$"
How do I write this command so that it will run on Mac OS X (and hopefully on Linux too)?
I tried lspci, lsusb and lshw but none of those lists my touchpad device. Where to look now?
View 1 Replies View RelatedWhy there are two so similar command in Linux? and normally what are the circumstances to use each of them?
View 2 Replies View Related