General :: Build Tclcl 1.16 - Getting Error
Nov 17, 2010I am trying to install ns2 2.28 in fedora 12 and iam getting an error as
[code]...
ADVERTISEMENT
Slackware :: Error With Gnome Slack Build (GSB) - ((Error Org.freedesktop.DBus.Error.AccessDenied.))
Jan 19, 2011after install slackware with gnome using gnome slack build it is work fine Except some thing :-
the volume it is not work and get this error ((The volume control did not find any elements and/or devices to control. This means either that you don't have the right GStreamer plugins installed, or that you don't have a sound card configured. You can remove the volume control from the panel by right-clicking the speaker icon on the panel and selecting "Remove From Panel" from the menu.
No volume control GStreamer plugins and/or devices found.)) and the System Monitor give me this error when i want check the state of memory and processor ((There was an error executing 'gnome-system-monitor': Failed to execute child process "gnome-system-monitor" (No such file or directory)) and the memory flash not work and give me this error ((Error org.freedesktop.DBus.Error.AccessDenied.))
General :: Getting Error : Make: *** /lib/modules/2.6.31-20-generic/build: No Such File Or Directory On 9.1?
May 9, 2010When trying to install my WiFi card's driver on Ubuntu 9.1, I run the make command and get the following error:make: *** /lib/modules/2.6.31-20-generic/build: No such file or directory
View 1 Replies View RelatedGeneral :: Lib/module/build And Set Kernel Path Error While Configuring Madwifi
Jul 25, 2010I am trying to install atheros AR5007EG on my toshiba laptop -i figured out that best way to install this wireless card is through madwifi -while configuring madwifi i get this error
I am posting the output of different commands so you can understand better -i manually tried to link the build directories to kernel-source which failed - i am not sure exactly what kernel source is and how i can link to kernel source -
My output:
General :: Can't Build RRDTool On RHEL4 - 'make' Command Give Error Message
Mar 19, 2010I'm new to LinuxQuestions and this is my first post. I'm trying to build rrdtool to install Cacti and encountered the following problem: 'make' step returns an error messages:
Code:
./.libs/librrd.so: undefined reference to `xmlTextReaderGetParserLineNumber'
collect2: ld returned 1 exit status
What I have doneDownload and build the latest version of pkg-config, glib, pixman, cairo, pango, atk, gtk+ from official sites.
Download rrdtool source
Set PKG_CONFIG_PATH correctly
[Code]...
There is actually another problem with the computer which is "The Nautilus application has quit unexpectedly" everytime I open File Browser application or right-click>Properties a file/directory. This happen only after installing cairo and pango and I don't know how to revert to old version. Since there are a lot of log files so I'm very confused. Can someone give me a direction on how to resolve this?
Slackware :: Build Handbrake Error - Gtk.install - Error 2
Aug 14, 2010I need handbrake software so badly so I went to alien's slackbuild to download the handbrake.However,it ends with error after compiling-
Does it mean i miss something of gtk?
Ubuntu :: Installing Emacs 23.1 - Error "makeinfo Is Missing - Cannot Build Manuals Make: *** [info] Error 1 **** Installation Failed"
Feb 6, 2010I've been trying to install the latest version of Emacs from source but I'm running into a trouble. The commands "./configure" and "make" work just fine. However, when I run "sudo checkinstall" I get a message saying that makeinfo is missing:
Code: makeinfo is missing - cannot build manuals make: *** [info] Error 1 **** Installation failed. Aborting package creation. Cleaning up...OK Bye. What is Error 1
Debian :: Backporting Build Process Error
Sep 12, 2015I'm trying to build a backport of the package redshift [URL] ...., from stretch to jessie.
I followed these instructions [URL] .... and ended up with an error at the last step (dpkg-buildpackage).
What I did:
Code: Select allsudo apt-get install packaging-dev debian-keyring devscripts equivs
rmadison redshift --architecture i386
dget -x http://http.debian.net/debian/pool/main/r/redshift/redshift_1.10-5.dsc
cd redshift-1.10
sudo mk-build-deps --install --remove
dch --local ~bpo70+ --distribution jessie-backports "Rebuild for jessie-backports."
fakeroot debian/rules binary
[Code] ....
Ubuntu :: LibreOffice Build Error In Maverick
Feb 9, 2011I am trying to build libreoffice 3 in my maverick machine, but after doing 'make' I got this build error
Building module boost
Entering /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost
mkout -- version: 1.8
dmake: Error: -- `./unxlngppc.pro/misc/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.unpack' not found, and can't be made
Forcing regeneration of dependency info
Nothing to do here...
dmake: Error: -- `./unxlngppc.pro/misc/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.unpack' not found, and can't be made
Retrying /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost
dmake: Error: -- `./unxlngppc.pro/misc/f02578f5218f217a9f20e9c30e119c6a-boost_1_44_0.unpack' not found, and can't be made
rm -Rf /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost/unxlngppc.pro # optional module 'clean'
/bin/bash
cd /home/abr/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4
source ./LinuxPPCEnv.Set.sh
cd boost
build
When the problem is isolated and fixed exit and re-run 'make' from the top-level
abr@abr-laptop:~/libreoffice/libreoffice-build-3.3.0.4/build/libreoffice-3.3.0.4/boost$
Slackware :: Error Building Glade3 - Build ?
Jan 21, 2011Im trying to build the glade3 slackbuild on slackware x64 -current, but everytime i try to build it, i get the same error:
Code:
There are no dependencies listed in the slackbuild, so i'm confused as to what could be causing this error.
CentOS 5 Server :: RPM Build Error Openssh 5.8p1?
Jul 19, 2011I am trying to build rpm for openssh 5.8p1 on centos 5.6 (32 bit) as i have not found rpm for i386 online. i followed the below mentioned steps but when i apply command rpmbuild -bb openssh.spec it gives this error at the end:
configure error: Pam Headers not found
error: Bad exit status from /var/tmp/rpm-tmp.18348 (%build)
if there is any rpm availble online or to sort out this build problem,Following steps i followed to build rpm. wget http://mirror.mcs.anl.gov/openssh/portable/openssh-5.8p1.tar.gz
tar -xvzf openssh-5.8p1.tar.gz[code]......
Now if you go back into /usr/src/redhat/RPMS/<arch> , you should see three RPMs. Go ahead and install them:rpm -Uvh *.rpm
Debian Configuration :: Build USB WiFI Driver Error
Oct 22, 2015I am running fully updated Stretch. I am tring to complie a driver for Ralink 5370 USB WiFi dongle. When I do make I get the following error:
Code: Select allmake[1]: Entering directory '/lib/modules/4.2.0-1-686-pae/build'
make[1]: *** No rule to make target 'modules'. Stop.
make[1]: Leaving directory '/lib/modules/4.2.0-1-686-pae/build'
Makefile:356: recipe for target 'LINUX' failed
I have installed build-essentials, linux-headers and linux sources. What I have to install to complete this compile?
Server :: RPM Build Error While Installing Maildrop-toaster?
Apr 19, 2011checking pcre.h usability... no
checking pcre.h presence... no
checking for pcre.h... no
[code]....
Software :: Gobject Introspection 0.6.14 Build Blowing Up - Error
Dec 31, 2010[code]...
this is the error i get building gobject-introspection.
Debian Multimedia :: Gnome 2.30 Build - LibIDL Make Error
Apr 7, 2010Did not find much here regarding building Gnome 2.30 from source. I'm using jhbuild to build the gnome 2.30 desktop. I have everything, to my knowledge, installed to build gnome. I get an error when trying to build the libIDL library. Anyone have any clue as to what I need installed or changed in the configuration file to build libIDL?
View 1 Replies View RelatedUbuntu Installation :: When Trying To Run 'python Setup.py Build' Get An Error (Shown At The End)?
May 5, 2010I would like to install pymedia on my ubuntu 9.10 karmic distribution, but I am having a bit of a hard time doing that.I managed to install all the libraries (lame, libogg, libvorbis etc.) but when trying to run 'python setup.py build' I get an error (Shown at the end).I found on the interwebs that it may have to do with the version of gcc c++ compiler running (currently gcc-4.4) and that it only works with gcc-3.x. Therefore I downloaded gcc-3.4 (from the old jaunty archive), and with this one still no joy.NebelhomP.S. I am not a complete newcomer to linux and python but I am not an expert so it may happen that I ask questions with a very obvious answer.
Code:
nebelhom@nebelhom-desktop:~/pymedia-1.3.7.3$ python setup.py build
Using UNIX configuration...
[code].....
Ubuntu :: Build Failed - Sub Process Returned Error Code
Sep 24, 2010The problem emerged when I started to make the internal microphone and external speakers work [URL]. In either kernel 2.6.32-24 or 2.6.35-15 - cannot install any package with apt-get. Here is the error I get when installing just anything [URL]. Basically, here is it:
Code:
ERROR: Build failed. Please review the build log at /tmp/alsa-driver-linuxant.3620.log
dpkg: error processing alsa-driver-linuxant (--configure):
subprocess installed post-installation script returned error exit status 2
Setting up libxslt1-dev (1.1.26-1ubuntu1) ...
Errors were encountered while processing:
alsa-driver-linuxant
E: Sub-process /usr/bin/dpkg returned an error code (1)
OpenSUSE :: Find All The Build-deps Or What They Are For That Matter To Build Boxee
Feb 20, 2010I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
OpenSUSE :: Build Libevent-dev 2.0.10 In Ooder To Build New Version Of Transmission?
Feb 16, 2011looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies View RelatedSoftware :: Self Build Rpm Fails With Missing Dependencies On Build Host?
Sep 24, 2009as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
OpenSUSE :: Error:make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No Such File Or Directory?
Oct 6, 2010I've downloaded a linux driver for my wireless card (Realtek 8191SE), and whenever I try to make it it gives me the following error:make: *** /lib/modules/2.6.31.5-0.1-desktop/build: No such file or directory. Stop.
make: *** [all] Error 2I have installed make, pattern devel_basis devel_C_C++, kernel-source, linux-kernel-headers, gcc43, etc.I also tried linking them:# ln -s /usr/src/kernel-headers-2.6.31.5-0.1-desktop /lib/modules/2.6.31.5-0.1-desktop/buildln: creating symbolic link `./build': File existslinux-ynct:/lib/modules # ls2.6.31.14-0.1-debug 2.6.31.14-0.1-desktop 2.6.31.5-0.1-desktop2.6.31.14-0.1-default 2.6.31.14-0.1-xen
OpenSUSE :: /lib/modules/2.6.34-12-desktop/build: No Such File Or Directory - Stop - Error
Mar 17, 2011I am trying to install an application. But when I do a make it gives me this error . I tried to resolve it by installing kernel-sorce, kernel-devel packages But still cant seem to get rid of the error.
View 3 Replies View RelatedSoftware :: Gimp Build From Source Libtool Error Makefile Edit
Apr 6, 2010So I've been trying to get GIMP 2.7 installed on my Slackware64 13.0, but I'm having some issues. After some extensive finagling and dependence findings, I got it to configure correctly, however, the make fails with libtool trying to find libgdk_pixbuf-2.0.la:
libtool: link: cannot find the library '..//usr/lib64/pkgconfig/gdk-pixbuf/libgdk_pixbuf-2.0.la' or unhandled argument '..//usr/lib64/pkgconfig/gdk-pixbuf/libgdk_pixbuf-2.0.la'
libgdk_pixbuf-2.0.la is in /usr/lib64/pkgconfig/, but for whatever reason, editing the makefile doesn't change this. (Yes I have the right permissions to edit it). First of all, why is it searching for /usr in the top build directory, and second, why doesn't an edit of the makefile work?
Ubuntu Security :: Script Running As A Special Build User Which Performs An Automated Build That Fails With (Too Many Open Files)?
Feb 11, 2011I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
Slackware :: Install The I386 Build On One Partition And The 64-bit Build On Another
Sep 16, 2010Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
Fedora :: Fatal Error: Mismatch Between The Program And Library Build Versions Detected
Apr 13, 2011I'm tring to run AMDOverdriveCtrl, since they don't have an RPM file for Fedora i tried to compile from source i followed the instruction in the readme files run the make command
Code:
% make
g++ -mwindows -s -pthread -lwx_gtk2u_richtext-2.8 -lwx_gtk2u_aui-2.8 -lwx_gtk2u_xrc-2.8 -lwx_gtk2u_qa-2.8 -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu_xml-2.8 -lwx_baseu_net-2.8 -lwx_baseu-2.8 -ldl -o./Release/AMDOverdriveCtrl ./src/CFanSpeedPanel.o ./src/COvdrSettingsPanel.o ./src/CFanControlPanel.o ./src/CColorTempPanel.o ./src/BezierMath.o ./src/Color.o
[code]....
and tried to run the application, and i get this error message
Code:
$ AMDOverdriveCtrl
Fatal Error: Mismatch between the program and library build versions detected.
The library used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.4,compatible with 2.6), and your program used 2.8 (no debug,Unicode,compiler with C++ ABI 1002,wx containers,compatible with 2.6).
Ubuntu :: Dev Package For Intern.h Ruby - ERROR: Failed To Build Gem Native Extension
Oct 26, 2010I am currently trying to get my RadRails working. There are certain tasks I cannot complete and I'm guessing that installing mongrel and some other items would get everything going. I run the update and it seems to fail horribly and I've been looking on google for the last 2 hours to the answer to this one. This is there errors I have gotten so far.
By the way I am currently using Ubuntu 10.04 if that makes any difference. I have already downloaded and installed sqlite3 and sqlite dev.
Code:
>gem install -l mongrel-1.1.5.gem
Building native extensions. This could take a while...
ERROR: Error installing mongrel-1.1.5.gem:
ERROR: Failed to build gem native extension.
[code]....
Now at this point I am just trying to find the intern.h header file and can't find out what to download to get that.
Ubuntu Installation :: Configure: Error: You Must Have GLib 2.4.0 Or Newer Development Headers Installed To Build
Oct 9, 2010I am trying to build Pidgin on my Lucid install and on running configure, I get the following:
Quote:
configure: error: You must have GLib 2.4.0 or newer development headers installed to build.
If you have these installed already you may need to install pkg-config so I can find them. I tried installing pkg-config, but it's already in its newest version. I then tried going to the following website
[URL]
and downloaded and extracted glib on my computer. That changed nothing. I was hoping someone could tell me what's going on here. I just tried the this:
Quote:
sudo apt-get install libgtk2.0-0
and got
Quote:
libgtk2.0-0 is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
OpenSUSE :: Ant Build.xml Does Not Exist - Build Failed
Apr 19, 2011Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.
View 5 Replies View RelatedOpenSUSE Install :: Build A Multiseat System (Build A Six-headed Six-user System LG #124)
Oct 1, 2010I am trying to build a multiseat linux system(Build a Six-headed, Six-user Linux System LG #124). I am posting some outputs output of lspci | grep VGA
Code:
00:0d.0 VGA compatible controller: nVidia Corporation C61 [GeForce 6150SE nForce 430] (rev a2)
02:00.0 VGA compatible controller: nVidia Corporation G98 [GeForce 8400 GS] (rev a1)
ls /dev/input/mouse*
Code:
/dev/input/mouse0 /dev/input/mouse1 /dev/input/mouse2
more /proc/bus/input/devices
[Code]...
I am having trouble in configuring xorg.conf. I am running Suse 11.3 desktop on my PC. Also, I have one onboard nvidia graphics 6150SE and I have put one nvidia 8400GS 512Mb in the 16X PCIe slot for the additional seat...
So kindly tell me what should I do now or what things are missing ?? For any further info abt my PC plz tell me to post outputs(specify the commands for the same..)