I want to start a virtual machine on another window panel, but I'm not sure what the command for this would be.
I have:
virtualbox --startvm myvin &
in my autostart.sh.
I have accidentally deleted the Panel in KDE. What is the window / task switcher called and how do I add it to the panel,
View 3 Replies View RelatedI'm pretty sure I saw this described on this board, with a screenshot, but I simply can't find anything about it: A window switcher (probably a compiz plugin) that displays a 3D view of all windows lying flat on a receding surface, with the selected one flipping up upright.
I assumed it was built in to compiz, but when I went to look it was not any one of the ones I can find in ccsm - must be a separate package. And by then I had closed the post.
my 4 WS screens in the bottom panel have suddenly gone really wide. They take up most of the panel now and things are getting squashed when I have a few programs open.Can't see any options to adjust the size/width? Using 10.10
View 3 Replies View RelatedI have a workspace switcher on one of my panels, and it has ten columns by one row. However, when Ubuntu first starts up, it only shows four workspaces. By screwing around with the settings, I eventually get it to show all ten, but it would be nice if I didn't have to do that. What is going on?
View 9 Replies View RelatedI am using the Shift Switcher on Compiz to switch windows. Also i don't use any taskbar to show what apps are open or not. Minimized windows are simply "invisible" as it were. When switching, minimized windows are represented by their icons. Instead i would like to see them as a thumbnail (as with maximized windows). Can i make Compiz do that?
View 1 Replies View RelatedI've been tweeking my gnome setup a lot lately...I have a 14 inch screen on my laptop and decided I didn't need title bars anymore....so I added a bunch new hot keys andinstead of eliminating the title bare, which kills the borders too, I changed the width to a minimum.If I use the window switcher, I can only see the window if that window is not minimized. All one can see is an icon telling you what program that window is using if that window is minimized. It looks great if the window is open on the desktop.Are there any work arounds anyone know s of or better compiz setups I could use ?
View 3 Replies View RelatedI'm using Fedora 15 in fallback mode.
Is it possible to remove the desktop switcher applet from the bottom panel? Or autohide or even delete a panel? That is, is there software I can install to do these things in Gnome 3?
panels can be made transparent by clicking on preferences/background.
But for some reason there is no obvious way to change the transparency of applets. Their transparency depends on the current theme. For example with the theme "radiance" window-switcher and date are opaque. With "human-clearlooks" both are transparent.
Is there a way change the transparency without changing the theme?
I've recently installed Ubuntu 10.04 Lucid Lynx and I don't like the fact the my viewpoint is being change when I use the window switcher (ALT+TAB). I tried going to the gconf-editor and changing the /apps/compiz/plugins/staticswitcher/screen0/options/auto_change_vp value to false, restarted.. it IS set to false, the CompizConfig settings manager shows that it is false, but for some reason it is still changing the viewpoint.
I tried disabling the window switcher completely just to see that the configuration works at all.. and it did work.. so, I'm not sure what to do so the view point won't change.
Any of you ever heard of OS/2 WARP? My dad is a longtime user, as was I until I got my Mac (and now my netbook with Ubuntu). In any case, the OS is a tad...obsolete and my dad at some point wishes to try Ubuntu. In his current setup, he has a "Window List" that can be activated using a keyboard shortcut. It's a popup (not in a menu bar or "panel") that can be moved around and resized. From that you can use your keyboard to navigate to the program or window that you want. For instance, if I want to get to Firefox, I press Ctrl+Escape (to activate the Window List) and then I hit "F" as many times as needed to highlight "Firefox". Then I just hit "Enter" and I'm there. Anything similar out there for Ubuntu (it is preferable if the solution has text as well as icons or else can have the icons removed leaving only the text)
In addition, both him and I would be interested in some program for launching/switching to programs using keyboard shortcuts. On the Mac, I use Quicksilver for this, where it actually Launches the program if it's not open, and switches to it if it is. However, Gnome Do unfortunately lacks this functionality and I have no way to do it off the top of my head.
switched to Lubuntu from Ubuntu - HW problems. I have run into several problems.1. I can't search for files in my system. I knew how to do it in Ubuntu, here I have no idea.2. How do I add another keyboard layout to "Keyboard Switcher"? What if I want to switch keyboards by CTRL+Shift? Is it possible?3. I would like to put my Pidgin into the panel so I could close it. I am used for it to go to the indicator applet but when I installed it it was empty
View 1 Replies View RelatedI'm having a weird issue with Lucid. On startup the power/user switcher applet doesn't load correctly, instead I see the me menu applet twice. I don't think I'm explaining this very well, so here's a screenshot.
[URL]
After killing gnome-panel, this corrects itself.
I am using Rhel5 and I'm new to linux so pardon me for sounding a bit green around the ears.Anyway..I got an error message a few weeks ago about how the start up script that displays icons on the far right of my start panel was malfunctioning and it was going to be deleted from the start-up. didn't really know what it really meant and I just clicked ok.wireless eth0 status icon as well as my amarok status icon are hidden on the start panel. How do I get it back/add that script back to the start-up
View 6 Replies View RelatedIs there a DBus command (or some other way from the command line) to toggle auto-hide on a panel in KDE Plasma? (I'm running KDE 4.6.)
I have a game I run in WINE that doesn't work right if it's autohidden and it would be nice to run it from a script that takes care of that for me.
Is it possible to run the GNOME session manager but not have a window manager? It would also be nice to have a panel (or at least a status notification area) that was in a window, rather than a title-bar less menu bar.
The reason I want this is that I'm using my Mac's X server and logging into a VM running Fedora on the same host. And I've noticed some things, like the ability to use USB tethering, depend on a D-Bus session being active, and possibly the NetworkManager widget in the panel.
From IRC - #gnome:<borschty> ok, then go to gconf-editor somewhere under /desktop/session there should be something like "required_components" and remove window-manager from that list. You could use something like wmctrl to change the window-type of the panel, but a) that might break stuff and b)
I like 11.04 with Unity however I would like to find a method of managing workspaces with mouse (not keyboard) which gives constant visual feedback and is faster than using the launcher bar, which although not 'slow', takes time to appear and it then takes time to locate the (non movable) desktop switcher item.I happily adopt most of what 11.04 (Unity) offers, however, I really still miss the good visual feedback and the single click action that the lower panel (classic) desktop switcher used. Is there a way of me using some item in unity which is closely similar?
View 3 Replies View RelatedEvery time I reboot my linux machine I have to set up 5 or 6 terminals and Im trying to find a way to do this automatically. Bind a script to a shortcut or on startup that starts several terminals (extra point if theyre tabbed) and have each terminal ssh to different servers.
View 3 Replies View Relatedmaybe not so simple as what the subject saysBackgroun storyI have a couple of encrypted hard drives created with cryptsetup
I have the following lines in my /etc/crypttab
data1 UUID=someUUID none noauto
data2 UUID=someotherUUID none noauto
[code]...
Can you run an application automatically when you load linux? In this case it would be VMPlayer?
View 4 Replies View RelatedI have a particular script xxxx in folder yyyy. How can i start/execute xxxx whenever i open or cd into yyyy.
View 3 Replies View RelatedI am using Fedora and trying to auto run a script soon after the unit boots to desktop. I found many suggestions and finally decided to use the Sessions->Startup Programs option (under System->Preferences->Personal->Sessions menu). I added my script in the Startup Programs with the command 'sh myscript.sh'. Now I have two questions here:1. When I use the command 'gnome-terminal -e myscript.sh', I get 'There was an error creating the child process for this terminal' message after logging into the desktop. Can any one tell if I am missing something here?2. Even if I use sh instead of gnome-terminal, I still want to see the script executing. In other words, my script has certain echo statements indicating the flow of the script. But I don't see any shell opening up with these echo statements showing up, after the unit boots to desktop. But the script was still executed with no problem
View 1 Replies View RelatedNewly installed Debian system from years with Fedora. Ran system update and system got hosed, booted but no Gnome. Got Gnome back after MANY 'aptitude upgrade's. Xemacs disappeared! Along with other things I installed. Tried to install Xemacs but it is broken and will not install, complains about dpkg TOO current(?). So downloaded Xemacs for Xemacs.org and compiled source, installed.
Now when I start Xemacs is does not run in an X window but runs emacs in a terminal window. If I run it from a script, it complains about 'not in tty window'.
My env show:
Code:
The Xemacs install on Debian ( Bug written ) Install and configuration of Xemacs from source. A better understanding of the Debian upgrade process.
I just installed TuxGuitar - very cool - and to get the sound to work I had to install Timidity++ as well. Before I start TuxGuitar I have to execute:timidity -iA -Osin a terminal window first, which is kind of a pain to do every time I run TuxGuitar.How do I get this line to execute on startup such that timidity is running when I start up? I tried adding that line to rc.local
View 13 Replies View RelatedI have installed fvwm-crystal successfully but when I try to start it by just adding the codes below to .xinitrc
Code:
exec fvwm-crystal
only a black background with a console window show up.
I also put the .xsession-error here,
Code:
1 /etc/gdm/PreSession/Default: Registering your session with utmp
2 /etc/gdm/PreSession/Default: running: /usr/bin/sessreg -a -u /var/run/utmp -x "/var/gdm/:0.Xservers" -h "" -l ":0" "xxx"
3 localuser:xxx being added to access control list
4 Launching a SCIM daemon with Socket FrontEnd...
5 Loading simple Config module ...
[Code]....
is this possible? I can't find a answer for this question..
View 11 Replies View RelatedI want to add auto hide button or check-box to a panel. any way to do it ?
View 9 Replies View RelatedI'd like to make all window of of all applications are located in the center of screen when they are started every single time, is there any way to do that ? of course,what i am saying that they are GUI apps, and when they are not started as maximum size window
View 2 Replies View RelatedI recently upgraded to ubuntu 10.10 and went through changing all my settings back to normal, but now when I change the opacity of the panel, it only affects the centre. I want the whole panel to be transparent like it used to be in 9.04. So is there any way to do that? Also, I tried using autohide, but its not responsive enough for me and i couldn't find settings for that either. So what about autofade? I can't find anything on that either. But it would be a great idea. I like my desktop being empty and clean, without the panels, (no im not changing it to the apple dock thing) EXCEPT when I actually want the panels.
View 1 Replies View RelatedI have a minor problem with gvim. My gvim never maximizes. Whenever I try to maxmize it automatically shrinks from right side and bottom. Don't know if anyone else faces this problem, but I have faced this even after re-installing the system It is not a show stopper but surely an irritant.
I am using openSUSE 11.2, KDE 4.3.5.
