General :: Why SMDK6410 LCD Screen Not Displaying Anything

Nov 15, 2010

I compiled the buildroot for zImage and rootfs.jffs2 for SMDK6410. Used the linux kernel 2.6.35 and busybox 1.17. And deployed these two images using DNW. The kernel and rootfs loaded successfully and able to do execute linux commands from DNW but not from LCD screen. I am new to the linux development and want to see a sample framebuffer / desktop application on the screen.

View 2 Replies


ADVERTISEMENT

General :: GNOME Login Screen Fails To Displaying?

Oct 17, 2010

I use Ubuntu 10.04 LTS.

I was compiling an application called Audacious. One of the dependent packages I needed to obtain was called Glib. After installing Glib (and a package it also required), my GNOME began failing and after rebooting the computer, the login GNOME login screen fails to displaying. Does anyone know what's gone wrong?

[URL]

Now after installing Glib, restart your computer and your GNOME will have failed. Why the F did this happen?

View 8 Replies View Related

Fedora :: F11 Installation Screen Displaying Halfway Out Of Screen

Oct 2, 2009

I'm trying to install F11 on my old FSC Amilo Pro laptop. The installer starts fine, shows up on the screen fine, but the graphic installation window is wrongly positioned on the screen. It's about 300px too far to the right and about 300px too low on the screen, so that my Next, Back, Cancel buttons etc are off the screen.

View 2 Replies View Related

Ubuntu Installation :: Dual Boot With Windows 7 - Blank Screen With My TFT Screen Displaying A Msg "Out Of Range"

Jul 8, 2011

I have installed Ubuntu 11.04 along side windows 7 ultimate. But the problem is as soon as I switch on my computer. There is only a blank screen with my TFT screen displaying a msg "Out of Range"

Then suddenly Ubuntu loads without showing any option to load windows 7.

View 2 Replies View Related

OpenSUSE :: 11.4 KDE - Information Displaying On Screen

Jul 22, 2011

I am new to linux go easy please. I have about 200 machines with opensuse11.4 KDE on them, I would like certain information to stick to the background kinda like a widget type of thing that cannot be removed by a user (no admin rights) and it has to start on machine boot up and also these pcs are continually moving to different spots in our building but on the same network so idk if that changes anything with configuring the ip address.... the only things that need to be visible are as follows:

Host name
User name
IP address
domain

So basically widgets are useless to me, unless somebody knows how to configure these the way I need them or maybe there is something better then widgets. I came here to get the right answer from all you geniuses out there instead of trying to hop around on google and whatnot. Let me know what my options are and how I can roll this out on 200 PC efficiently.

View 9 Replies View Related

OpenSUSE :: Blank Screen - Stop Displaying?

Jul 10, 2011

I have a little brother who is handicapped and uses the machine he was sat by the computer with a blank screen at which point my dad soft rebooted the machine (he will sit at the machine if its not working but he cant tell us its not working). I don't know if the below caused the machine to stop displaying?

Code:

View 6 Replies View Related

Ubuntu :: Displaying Maximum / Desired Screen Resolution?

Jan 16, 2010

New to ubuntu, as of about 3 days ago. Using ubuntu 9.10 on a Dell Dimension 3100. I installed ubuntu as a program on windows 7. I am only given the option for 800X600 and wanting to switch to 1024X768. My graph card is MESA DRI Intel 915G GEM 20090712 2009Q2 RC3/x86/MMX/SSE2 v1.4 Mesa 7.6. Other info: The X.ORG Foundation v1.6.4. How can I get the desired screen resolution?

View 1 Replies View Related

Fedora Hardware :: NVidia Not Displaying At Correct Screen Resolution

Mar 14, 2010

Code:
Fedora 12
2.6.32.9-70.fc12.i686
GEFORCE GO 7400

When my notebook boots I get a high screen resolution. However, when I login it seems to go to a lower resolution that is not clear. I think this all started when I updated to a new kernel. So I reinstalled the nvida drivers using leigh's guide. However, I still can't seem to get it to display correctly.

Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (mockbuild@) Sun Feb 28 14:49:02 EST 2010
# Xorg configuration created by livna-config-display
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....

View 7 Replies View Related

Ubuntu Multimedia :: Screen Crashing And Displaying Funky Colors?

Jan 1, 2011

For the past month or so I have been having some issues with screen crashing and displaying funky colors. Basically it happens at completely random times, doing completely random things. The screen goes to a pink color then freezes the the only way I can gain control again is if I restart the machine or restart gdm via ssh. This is really puzzling me. Perhaps there are some logs I can look at? A little bit about my system:

Code:

Processor2x Intel(R) Core(TM)2 Duo CPU E8400 @ 3.00GHz
Memory4059MB (1321MB used)
Display[code].....

View 1 Replies View Related

Programming :: Redirect The Output To Multiple Files Without Displaying It To The Screen?

Oct 26, 2010

To redirect standard output to multiple files:

Code:

echo Test | tee file1 file2

My problem is that the word "Test" still displays to the screen? I want same effect as:

Code:

echo Test > file1

but with multiple file redirection.

View 3 Replies View Related

Ubuntu :: Graphics - Screen Crashing And Displaying Funky Colors

Jan 1, 2011

For the past month or so I have been having some issues with screen crashing and displaying funky colors. Basically it happens at completely random times, doing completely random things. The screen goes to a pink color then freezes the the only way I can gain control again is if I restart the machine or restart gdm via ssh. This is really puzzling me. Perhaps there are some logs I can look at? A little bit about my system:

[Code]....

View 4 Replies View Related

Ubuntu Installation :: Dell 8400 - Screen Displaying Main Menu And Not Changing

Jan 31, 2010

I my trying to install Ubuntu onto a new 1 TByte Sata HDD on my Dell 8400. The computer has no other OS installed as the old HDD containing Windows XP has being removed. The new hdd has being fully formatted and is set up as a NTFS with a single partition of 1 TByte. I downloaded the latest version of UBuntu and burned it to a cd as a ISO file. When I boot my computer up from this cd I am asked to enter my language of choice and then I get the main menu screen. On this screen I choose option (2) - Install Ubuntu. After a few minutes during which time you can hear the cd being accessed the screen just displays this main menu and never changes. I have tried twice using this install option but after 45-50 minutes the screen still never changes. No progress information is given. If it is normal how long does the installation generally take?

View 2 Replies View Related

Ubuntu :: Mozilla 3.6.6 - Logging Into GoDaddy Account Keeps Displaying The Login Screen And Not My Accounts Page

Sep 7, 2010

Since I have upgraded to Lucid (and thus to Mozilla 3.6.6), I am experiencing a bunch of annoyances with Mozilla.

1) logging into my GoDaddy account keeps displaying the login screen and not my accounts page (yes, I checked the password)
2) creating an account in bugzilla resulted in an "Invalid OpenID transaction" error message instead of a confirmation page
3) the [URL] page popped up a parser error instead of the website.

Midori and Mozilla 3.0.8 work just fine. Does anybody else have problems with mozilla 3.6.6 and above?

View 3 Replies View Related

Hardware :: Nvidia 8800 Gts - Card Stop Displaying On Screen - Make A Fan Sound Like If Was Overheated

May 7, 2009

HP Pavilion Media Center a1430n Desktop PC
Athlon 64 X2 (T) 3800+ 2.0 GHz
Asus A8N-LA chipset GeForce 6150 LE
1 gB of RAM

Video Graphics: integrated
Hipro hp-d3057f3r max out put 300w

Here is the problem fist i had a 8800gt installed it work fine until one time the card stop displaying on my screen and the card would make a fan sound like if was over heated......but my integrated still displays... ok then i send the card to my provider so it can be replace.. so they send me a 8800gts .... and i installed and deleted the old drives and even upgrade my bios .... but still happen like it happen whit the 8800gt it wont display any thing on my screen and also is making the same fan sound of the 8800gt ....

View 5 Replies View Related

General :: Ls: Displaying The Whole Path?

Jun 7, 2010

GNU/linux kernel 2.6, slackware 12.0

Can ls display the whole path of a file? Suppose I have /media/cdrom1/*. So I want the output of ls to be

/media/cdrom1/file1
/media/cdrom2/file2
..................
/media/cdrom2/fileN

View 12 Replies View Related

General :: NAM Window Not Displaying In NS2

Oct 10, 2010

I am working on ns2 for my new project. I have successfully installed ns2 on fedora 8 but whenever I try to run in wireless example it does not display the scenario in nam window. It works with wired but not with wireless. It also create nam trace file but does not show anything. I also tried to run Marc Greis tutorial wireless ex but same problem continue.

View 7 Replies View Related

General :: Ubuntu: Tool For Displaying Disk Activity In General And By Process?

Oct 12, 2010

My Ubuntu system is occasionally becoming very sluggish. I'm running many things simultaneously and it's very difficult to tell which program is the culprit.

I suspect that the sluggishness is due to disk activity since the CPU usage is consistently under 50% on each of the 4 cores of the CPU, and over 30% of the 6GB of RAM are free.

Is there a tool that can show me in real time the number of disk IO operations per second and the amount of data read/written per second? Can all this info be broken down and displayed per process?

View 2 Replies View Related

General :: Displaying Text On /dev/tty1?

May 3, 2011

I have a server laptop sitting around at home which is a pretty bland server, on which I generally leave the lid open and there is a login prompt always displayed.

However, I'd love to be able to display useful information on /dev/tty1 so whilst the server is just sitting there, rather than displaying a login prompt on the monitor, it could now display, for example, the current time and weather forecast for the day. Or something along those lines.

View 2 Replies View Related

General :: CentOS Not Displaying Gnome?

May 19, 2011

After booting my PC which is running CentOS, it did not display the desktop. It just displayed a terminal window and a firefox browser all on a black screen!

View 5 Replies View Related

General :: Stop Du Command From Displaying Directory Name?

Apr 28, 2011

Does anyone know how to stop the du command from displaying the directory name?

View 1 Replies View Related

General :: Php Programs Errors Not Displaying On Browser

Feb 8, 2011

i have installed fedora14 on my system, while running the php programs errors are not displaying on the browser. display the error while running on the browser at localhost.

View 2 Replies View Related

General :: Webalizer Not Displaying Info On Www Pages?

Sep 14, 2010

I have been trying to configure webalizer on a centOS 5.5 system. I did the yum install and I found this helpful link...However when I try to change the dir it puts the info into, it keeps giveing me an error cannot cd to the directory. I changed the /etc/webalizer.conf file as described in the above article and try to run it manually same results. /etc/cron.daily/00webalizer Error: Can't change directory to /home/webalizer/When I put the original dir back in the path it writes to /var/www not /var/www/output like it should. I even tried a local /var/wwww/output dir. Then I tried a link to /home/webalizer/output (a dir I created) and same results.(with orginal .cfg in place)I go to my www page remote or on the local network I get page not found errors.In summary.1. Why wont the /etc/webalizer.cf file allow me to change the location of the files?2. How do I display the www page to view the data?3. How can I secure the www page so only I can view the data.

View 4 Replies View Related

General :: Displaying All Network Interface Card

Mar 31, 2011

i am new to redhat linux,how do i list all newly added network interface card.can someone kindly help me with this?

View 11 Replies View Related

General :: Displaying Chinese Character In Fedora?

Oct 14, 2010

I need to display chinese character in filename and also on firefox, any link so that I can check out how to do this?

View 1 Replies View Related

General :: First Step Window Isn't Displaying Information?

Jun 8, 2010

I'm running Linux Fedora 12 here and I launched a script to create a profile and it launched successfully...

Now the problem is, after the creation of the profile its suppose to launch "first step" but now this windows appears blank and when i move the cursor around it picking the links..

View 3 Replies View Related

General :: Prevent Displaying Image On Web Browser?

Sep 7, 2010

how to disable displaying image on web browsers. Example I have a link [URL].

- when I connect to this link on my browser, it will not display the image

- But I can use <img src="/img/test.jpg" to websites can read it.

View 9 Replies View Related

General :: Information Not Displaying Correctly On Gnome Desktop

Jun 19, 2010

I have installed both Fedora and Ubuntu with Gnome Desktops and it displays the information an inch to the left, this problem may have to do with the fact that the display comes up as unknown.

View 1 Replies View Related

General :: Displaying Mounted Devices - Incorrect Info?

Feb 11, 2011

Sometimes when I try to display the mounted device in linux it displays devices which are not currently mounted. I want to correct this this using script.

View 1 Replies View Related

General :: Alias For Changing To Directory And Displaying All Files

Jul 4, 2011

I'm trying to setup an alias, that when I change to another directory, any directory, it will also display all its contents like ls -al:Well, that doesn't work. I guess it's an issue with the use of wild-cards.Maybe I should define a new, so far unused, name for the alias like cdl for example.Would be great if someone could help me. I search in several examples for bash aliases but couldn't find the right solution.

View 9 Replies View Related

General :: Aptitude Displaying Directories - Not Showing Actions

Aug 19, 2010

Code:
$ aptitude s
sbin/ selinux/ server/ srv/ sys/
This is what happens when I hit TAB. It always showed "show" and "search" actions before... Why directories now?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved