General :: Unable To Use Mkpasswd On RHEL 5.0
Jan 19, 2010i am unable to use mkpasswd on RHEL5.0, can any one suggest me how to get it working? i guess there must be some package responsible for this command?
View 6 Replies
ADVERTISEMENT
Software :: Unable To Boot To RHEL 4 32bit After Installing RHEL 64bit - Error 13: Invalid Or Unsupported Executable Format
Apr 27, 2009I have 4 partitions in my system, out of which two(sda1, sda2) have windows on them. I have installed RHEL 4 32 - bit on sda3 and after that , installed installed RHEL 64-bit on to a partition sda 5. Now i am unable to boot into RHEL 32-bit. The error i am getting is Error 13: Invalid or unsupported executable format.
View 1 Replies View RelatedGeneral :: Unable To Get GUI After Installing RHEL 5.0
Mar 10, 2010I am not getting GUI in after installtion RHEL 5.0
My Mother board: Mercury
Model no1845 gcm
Moniter :LG 15''
General :: Unable To Run Wifi On Rhel 5
Oct 14, 2010how to start wifi on rhel 5 then from some source i got a little bit knowledge but it is stil not working steps followed by me were:
system/administrators/network
network -configuration wizard opened here i did some steps which result into the following line [checked]active eth0 eth0 wireless then i click activate it gets activate as shown in the above line means it gets activated but iam not able to ping from my router iam provided with network key and ip address now what to do? i have entered the key and ip address.but it is not still pinging from router. one more thing before rhel, i have ubuntu 9.04, on this i configure wifi my ownself. but why it is not working on rhel.
Ubuntu Security :: Find The Source Code Behind Mkpasswd?
May 14, 2010I am trying to find the source code behind mkpasswd which I apt-getted from universe. I am trying to code a similar app in Java and want to see how the salt is implemented in the /etc/shadow file.
Bu I just can't seem to find any source about that particular program...
General :: Unable To Go To The Graphical Mode In RHEL 6?
Jun 26, 2011I was using win-7. I tried to install RHEL 6 today. [dual boot]/ = 40000 MB and /boot = 1000 MBThe installation completed successfully.The problem is that it is not showing the graphical mode. Only the terminal mode is available. I tried chvt 1-7but I am unable to go to the graphical mode. It is not appearing.What should I do? System config:MSI CR420 Laptop.ntel core i3-350MEdited after following user76871's answer:There is no Xorg.0.log file in /var/log/, There is no xdm in /etc/init.d/, there is no kdm also.I tried startx that also didn't work. I tried system-config-display but the display is not available at system-config-
View 2 Replies View RelatedGeneral :: Unable To Connect RHEL 4 Through Xmanager?
Dec 16, 2010I am not able to connect RHEL 4 through x manager. The problem is with only new installion. The previously installed PC with xmanger is working and able to connect RHEL.
View 1 Replies View RelatedGeneral :: RHEL 5 Screen Freeze \ Unable To Log In At The Console Nor?
Sep 21, 2010I am loving the server, except for in the last couple of days the server has completely froze and I am unable to log in at the console nor am I able to connect toit via SSH. Once I force a shut down and restart the server, everything is fine. Where could I look to see what happen to the server? Is there a tool I can use?
View 6 Replies View RelatedGeneral :: Unable To Run 'Software Update' After Upgrade To Rhel 6.1
Jun 14, 2011I was using RHAT 6.0 Open Client for a couple months and didn't have any issues. Recently my company released version 6.1 of Open Client and recommended to upgrade it. Upgrade went smoothly and I didn't notice any problems until at some point it failed to run 'Software Update' application.
View 3 Replies View RelatedGeneral :: Unable To Install Wifi Drivers In RHEL 5.4
Mar 14, 2010I am not able to install wifi drivers in RHEL 5.4. OS has installed drivers of Bluetooth But It does not install driver of wifi. I have recently installed the linux.
View 1 Replies View RelatedGeneral :: Unable To Play Mp3 - Mp4 File In Rhel 6.0 Beta / Sort It?
Dec 1, 2010I can't play mp3 from Rhythmbox music player, it says MPEG-1 Layer 3 (MP3) decoder plugin required, and also I can't play mp4 from movie player it says h.264 decoder and MPEG-4 AAC decoder plugin required. what a joke!!! can you imagine for a newbie and for the first time like me use linux operating system find something like that.
View 2 Replies View RelatedRed Hat :: Unable To Boot RHEL 5.2 And Unable To Mount Root File System In Rescue Mode
Jan 28, 2010Environment: A 32-bit kernel RHEL5.3 system running on a virtual machine. The root(/) filesystem is on an LV.
Issue: Unable to resize the FS after extending the root LV since it is mounted. After extending the LV, online resizing of the FS was not supported and the root filesystem could not be unmounted while it was in use. On rebooting, I got a kernel panic error. In runlevel 1, I couldn't run chroot, couldn't find the /etc/fstab, root FS could not be mounted, fsck did not run (tried block 31 for second copy of superblock using dd count=1 bs=4k skip=31 seek=1 if=/dev/sda2 of=/dev/sda2), couldn't find any rpm on installation media to install unix-utils rpm. On running commands in runlevel 1,
I got the following output.
General :: Cannot Ping From Host (RHEL 6) To RHEL 5 In (virtual)?
May 1, 2011can not ping from host (RHEL 6) to RHEL 5 in (virtual)? I have stopped iptables on both machines. But still not able to ping from host machine to virtual.
View 1 Replies View RelatedGeneral :: Downloading RHEL 5.4 AS From RHEL Website?
Dec 23, 2009I am trying to download RHEL 5.4 AS version for testing..But under [URL] There is no specific link for AS version or ES version..How can I detect which iso is for AS and which one for ES..? There are separate links for AS and ES version for RHEL 4.x version but why is it not available for RHEL 5.x versions?
View 3 Replies View RelatedGeneral :: Difference Between Rhel 5 And Rhel 6?
Feb 3, 2011difference between rhel 5 and rhel 6 - basic difference.
View 3 Replies View RelatedGeneral :: Upgrade From RHEL 3 To RHEL 5.x?
Nov 18, 2009i have old RHEL 3 system which has kernel 2.4 installed into it. I wasnt to upgrade it to RHEL 5.x so i downloaded a kernel 2.6 package but was not able to compile it.
View 1 Replies View RelatedRed Hat :: Unable To Get Multipath Configuration LVM / RHEL 5.3
Mar 24, 2011I have and RHEL5.4 conecceted to an SAN HSV200. When I present a LUN to it, In system-confg-lvm gui appears a device like /dev/mapth/mapth0 (that�s the correct device to multipath) and other like /dev/sda or /dev/dm-N, as uninitialized entities. How could I configure to not display this device (/dev/sda) and prevent human errors?
This is the things I need:
1- I want (if it is posible...) to disappear the part where it says "uninitialized entities"
2- Is It necesary mantain the partitioning done to default (like /dev/mapper/mpath0p1) with device-mapper-multipath (kpartx command)? or Can I delete it without future problems?
This is the actual configuration that I have:
1- /etc/lvm/lvm.conf
Code:
preferred_names = [ "^/dev/mpath/", "^/dev/mapper/mpath", "^/dev/[hs]d" ]
filter = [ "a/dev/mapper/mpath.*/","a/dev/cciss/.*/","r/.*/" ]
2- /etc/multipath.conf
Code:
#blacklist {
# devnode "*"
#}
[code].....
Networking :: Unable To Connect To Internet On RHEL 4
May 30, 2010Trying to connect to internet. by doing service network restart getting msg "3c501 device etho does not seem to be present, delaying initialization". On running command lspci |grep -i ethernet, getting following info ethernet controller- Realtek semiconductor Ltd.unknown device 8136 (rev 01) subsystem- Gigabyte On running command cat /etc/modrobe.conf, getting the following info
alias usb-controller ehci-hcd
alias usb-controller1 uhci-hcd
alias eth0 3c501
Red Hat / Fedora :: Unable To Install RHEL 5.2 On I686 Machine
Jun 16, 2010I am not very new to LINUX. I was using UBUNTU for the last 1 year and I have switched to Redhat now because I am thinking of taking a RHCE certification now. Actually the problem is that I am unable to install RHEL 5.2 i386 on my i686 machine, I have bought it recently 1 week ago. I tried to use the boot parameter "linux noprobe" then it said drivers not found after 2 steps when it loads drivers.
When I tried to make a GUI install it hanged after "loading /sbin/loader" and said "kernel panic - not syncing". And when I tried to make a text install it said hanged agin after "loading /sbin/loader" and said something like "Oops: 0000 [#1] SMP". If drivers are needed then when can I get those and how can I install those drivers? here is my hardware information as "lspci" says:
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 1 (rev 01)
00:1c.1 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 2 (rev 01)
00:1c.2 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 3 (rev 01)
00:1c.3 PCI bridge: Intel Corporation N10/ICH 7 Family PCI Express Port 4 (rev 01)
00:1d.0 USB Controller: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 (rev 01)
00:1d.3 USB Controller: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 (rev 01)
00:1d.7 USB Controller: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
00:1f.2 IDE interface: Intel Corporation N10/ICH7 Family SATA IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation N10/ICH 7 Family SMBus Controller (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02)
Red Hat / Fedora :: Unable To Install Ethernet Driver For Rhel 5
Sep 16, 2010i have rtl 8111/8168b gbe ethernet card. i hav downloaded its tar file from from gigabyte website.......kernel version is 2.6.18-8.el5
View 1 Replies View RelatedRed Hat / Fedora :: Unable To Push RHEL 6.0 Past 95% Utilization
Apr 22, 2011- I am running with Oracle UEL 6.0 (2.6.32-100.28.5.el6) because stock RHEL 6.0 (2.6.32-71.el6 ) has issues with the async I/O driver.
- The test is a high throughput performance benchmark running on Oracle 11gR1
- I am pumping a lot of disk I/O through the system while running with enough users to max out the 8 CPUs, which get to 99+% utilization with RHEL 5.3
- The server is a 4-socket Nehalem EX X7560. Right now, only 2 cores per socket are enabled.
- There are GBs of memory left over. The disk response time of the SSD arrays is around 1ms and the arrays are capable of 4-5 times more IOPS. Same with networking, etc. The testbed is capable of maxing out 32 CPUs with RHEL 5.3 I cannot push the RHEL 6.0 CPU utilization past 95-96%. The same test on all flavors of RHEL from 4.4 to 5.3 can totally saturate the CPUs. It feels like the system is intentionally holding back some CPU cycles.
Software :: Unable To Get Ldap RHEL 5 Configuration - Phpldapadmin?
Mar 8, 2011I have installed ldap and phpldapadmin.configuration looks like /etc/ldap.conf I added the lines
Quote:
base dc=devnet,dc=gd,dc=com
uri ldap://10.10.1.51/
/etc/openldap/ldap.conf
[code].....
Red Hat :: Unable To Password Break By Rescue Mode In RHEL 4.4
Jan 5, 2011i using RHEL4.4 i forget password and im unable to access single user maode ,i try to rescue mode to break it, message comes unable to start pam
View 4 Replies View RelatedRed Hat / Fedora :: Unable To Detect HDD When Installing RHEL 5.5 Using RocketRAid 2640x4?
Dec 5, 2010I have a rocketraid 2640x4 with 2 500gb HDDs configured in my system. I also have a 3.5" usb floppy disk plugged in with the SCSI drivers When I boot the RHEL 5.5 x86 32 bit installer, i type in "linux dd" at the first screen. Then it asks me to load my drivers via the floppy disk which i do. When i get to the installation page of Linux after entering my serial key, it is not able to detect my HDD so i am unable to proceed. I have tried using drivers for RHEL 5, 5.1 and 5.2. There are no drivers for 5.5.
View 9 Replies View RelatedServer :: Edit The Default RHEL CD To Have It Automatically Install RHEL Based Off Of A Kickstart File
Mar 2, 2011is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies View RelatedServer :: Configuration Difference Between RHEL 3 To RHEL 5 For Webserver Installations?
Feb 1, 2011We are planning to migrate our LINUX server from RHEL 3to RHEL 5. What are the configuration difference between RHEL 3 to RHEL 5 for webserver installations?
View 1 Replies View RelatedSoftware :: Uninstall RHEL 3 And Install RHEL 9 Without Affecting XP?
Jul 13, 2009I have RHEL 3 and Win XP Installed in my P.C?I want to uninstall RHEL 3 and install RHEL 9 without affecting XP.how can i do this and also where can i download free RHEL 9 version or any other latest linux distribution for free?
View 1 Replies View RelatedCentOS 5 :: Pirut/yum: RHEL 5.1 - Maintain An Unregistered RHEL Box?
Feb 16, 2010A client has sent me an RHEL 5.1 box for me to do some work on, but it's not registered with Red Hat. This is causing me problems, because it's a minimal installation, and I need some more dev software.My immediate reaction was to install various bits (emacs, and so on) from my Centos 5(.0) DVD.The base RHEL system only had one (disabled) repo entry,so I added a yum DVD repo entry in yum.conf.d.
This looked good to start with, but it doesn't work. Something in RHEL's pirut/yum/rpm/whatever is getting confused, and can't work out what is/isn't installed.
Question - how do you maintain an unregistered RHEL box? Has RH done something to make life difficult? Is my problem simply that I'm using a Centos 5.0 DVD, instead of Centos 5.1? Am I stuck with downloading lots of rpms from the net and doing everything manually? I really don't want to do that.
Server :: Major Differences Between Rhel 5.2 And Rhel 5.4?
Dec 14, 2010what are the major differences between rhel 5.2 and rhel 5.4
View 2 Replies View RelatedRed Hat :: Duplicating A RHEL 5.1 32bit Server On RHEL 5.4 64 Bit
Dec 9, 2009I have a database server running RHEL 5.1 32 bit that suffered some catastrophic failures about 6 months ago. We were able to patch it back together and keep it running, but now the manufacturing site it supports is going to shut down for two weeks and I would like to replace it permenantly. Does anyone have any guidance for that sort of thing? I'd like to have the new server up and running before hand, basically changing the hostname/ip and restoring the databases only on conversion day. I've done this in the past with HP UX - Red Hat conversions, but this is my first red hat to red hat move. Any advice or shortcuts?I forgot to add the other wrinkle. The new server will be running 64bit linux.
View 1 Replies View Related