General :: Ubuntu Is Running In Low Graphic Mode?
Jun 24, 2011
I am using ubuntu 11.04 on dell insprion 1545. But I am facing a problem that when I start laptop a message shows on the black screen that says
Ubuntu is running in low graphic mode. Your screen, graphic card and input device setting could not be detected correctly, you will need to configure these yourself
I have read that there is a file Xorg.conf that contain the graphics card information. I have also use the command
sudo cp /etc/x11/xorg.conf /etc/x11/xord.conf_backup
but its not working.
View 1 Replies
ADVERTISEMENT
Jul 9, 2010
My girlfriend accidentally removed the power from the computer and now i cant boot up. I just get Ubuntu is running in low-graphics mode and than:
0 run ubuntu in low-graphics mode for just one session
0 reconfigure graphics
0 troubleshoot error
0 exit to console
0 restart x
the only thing im able to do is boot up in terminal mode. i have tried google and found nothing that worked.
View 1 Replies
View Related
Dec 7, 2010
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies
View Related
Sep 14, 2009
The system always boot up in Graphic Mode. After installation of Web Server, I want to disable Graphic Mode and change it to boot to Text Mode to save memory. Is there a way to disable graphic mode?
View 1 Replies
View Related
Mar 22, 2010
aftar install bluez package , ubuntu boot with text mode and can't boot with graphic mode and have not graphic environment.run command following,but no fix problem:dpkg-reconfigure xserver-xorgCode:startxX/etc/init.d/gdm startaptitude reinstall xubuntu-desktop
View 2 Replies
View Related
Nov 25, 2010
I try thus Ubuntu Linux Server edition 10.10. I have installed it on a Virtual machine but don't know how to open GUI (Windows mode) in linux. What is the command for that or do i need setup anything more?
View 2 Replies
View Related
Mar 28, 2010
My server was installed Centos 5.4 maximal. Now I want to remove packages which are unnecessary for security .
how to remove graphic mode on the server (include related packages)?
View 6 Replies
View Related
Jul 20, 2010
After fedora shows in graphic mode, I find my screen blinks. Noisy horizon lines can be observed. Fedora 13 on a Toshiba M355.
View 5 Replies
View Related
Apr 28, 2010
I did a text installation of the Minimal Install CD of 9.10 (Karmic) and wound up with a console only. I installed Icewm, how to boot to graphic (GUI) mode.
View 5 Replies
View Related
May 5, 2010
Im running a virtual linux server on a low-end system, and i wold like to configure the server to boot in terminal window and not to the Gnome log in window, this is because of the low specs on the hardware.
View 5 Replies
View Related
Jul 7, 2011
How can we put ssh/putty session running even after in standby or disconnected mode.The idea is to have run a long running job from my notebook, which may take 6-8 hours, and if i come next day, there should be interrupt with it.
View 7 Replies
View Related
May 10, 2011
I searched and found several solution but those are distro specific. I need to find out if distro is running in live mode (from CD, USB) instead it's installed on hdisk. The solution should be independent of distribution.
View 7 Replies
View Related
Sep 3, 2010
I fired up my PC this morning and not unusually got an update message. I updated all that I was instructed to, as per normal - and at the end of the update was told that I'd need to restart to effect changes. I was in the middle of something else at the time so I left it but I turned the PC off an hour or so later and left it.
On starting up again I cannot get my previous resolution (1600 x 1200) and Second Life resolutely refuses to run giving a "Window creation error". Trying to change the display settings from the System> Administration menu just stops: It asks for the root PW and then nothing happens
Clearly something's gone a bit pear shaped here. I'm using Fedora 12 wth a PAE kernel and on an AMD 5200 chip with an nvidia 7900GS card. Things worked fine until this update so I strongly suspect that to be the cause but what can I do to fix it? Is there any way to "roll back" the update somehow or is there a fix?
View 9 Replies
View Related
Aug 30, 2010
Below is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
View 3 Replies
View Related
Mar 30, 2010
So I finally got ubuntu..I wanted to play team fortress 2.Runs great in wine etc.But 1 problem.It keeps saying my graphic card is outdated.I cant see anything.So I downloaded the driver from nvidia website.Followed some instructions.But it says cannot open binary file or something.Is there any other way to update graphic drivers.Cause I realy still want to play some windows games.Mount&blade, Atlantica online,team fortress 2 etc
View 1 Replies
View Related
Nov 8, 2010
i justy got me a dedi box and there is no graphic driver installed on it, or it dont work :/ VGA compatible controller: S3 Inc. VT8375 [ProSavage8 KM266/KL266] but wen i try installing enemy territory it comes back with error on graphic card
[Code]....
View 9 Replies
View Related
Oct 28, 2010
I have an ubuntu PC with 512 MB ram and an 3d graphic card that can normally support Guild Wars on windows xp. I installed the game with Wine an the game opens, I can see my character menu but the problem is none of the 3D graphic parts works, I just see a black screen.I even installed directX.
View 3 Replies
View Related
Jul 5, 2010
I am a semi-noob on this and I have problems getting my emacs recognizing .tex as latex and even running latex-mode. Usually when you run latex-mode (M-x : latex-mode) emacs should switch to latex-mode, but nothing happens in my case. The menu bar still show the TeX options, highlighting remains the same etc.
I am running emacs 23.1.1 (x86_64-unknown-linux-gnu, GTK+ Version 2.10.4), this is on a university system so I don't know much about it.
> uname -a
Linux karakum 2.6.18-164.11.1.el5 #1 SMP Wed Jan 20 00:57:09 EST 2010 x86_64 x86_64 x86_64 GNU/Linux.
View 12 Replies
View Related
May 7, 2011
I was attempting to install conky, but I hit some errors and now my ubuntu is running in low graphics mode.
View 1 Replies
View Related
Apr 29, 2010
I'm trying to run the subj on my desktop but all the time i get this : "The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again." I hit ok and pc throws the cd out, and thats it; Rebooting gets me back to win 7.
View 1 Replies
View Related
Feb 21, 2011
I have Ubuntu 10.10 and when I boot my PC I can see the following message: Ubuntu is running in low graphics mode and Ubuntu stops booting. I can-t boot in it I can only use command line.
I think I accidentally uninstalled some packages clicking at completelly removal at some ipod utillities in synaptic. How can I fix this?
View 4 Replies
View Related
Mar 2, 2010
I'm running Ubuntu 9.10. I tried a solution for a wifi problem (wasn't always connecting) and now when I reboot I get "Ubuntu is running in low graphics mode" along with a bunch of EE messages. When I click OK it gives me "Run Ubuntu in low-graphics mode for just one session." Which gets me back to the desktop.
View 1 Replies
View Related
Mar 24, 2010
I am getting the following upon booting up after upgrading from 9.10 to 10.04 Beta:
Ubuntu is running in low-graphics mode. The following encountered. You may need to update your configuration to solve this
(EE) intel(0):[drm] failed to set drm interface version
(EE) intel(0):Failed to become DRM master
(EE) intel(0):failed to get resources:Bad file descriptor
(EE) intel(0:Kernel modesetting setup failed
(EE) Screen(s) found, but none have a usable configuration.
I then press the OK button (no other option given). Then I'm presented a menu with the following options:
(x) Run Ubuntu in low-graphics mode for just one session
( ) Reconfigure graphics
( ) Troubleshoot the error
( ) Exit to console login
( ) Restart X
Cancel and OK buttons. I choose OK and the system seems to boot ok.
I'm not sure what is wrong or how to go about solving this one.
View 3 Replies
View Related
Jun 20, 2010
(Consider yourselves forewarned: I'm completely new and will be incredibly stupid. Give me slack. )
So I'm trying to run my S-Video cord from my HP Desktop to my television screen. Everything was set up, then I looked up how to get it to start playing on forums here. I went to my NVIDIA, and when I went to change what apparently had to be changed, it was already set up in the format I was supposed to set it up as. I hit "save", and then restarted my computer, as the step-by-step instructions said. Upon restarting, I got an interesting message saying that Ubuntu had to be run in low graphics mode. I don't know the logistics of my computer, or really anything (it was given to me, and I don't know how to check ) I've been reading some things here, and a few things sounded like what was wrong with me, but when I followed the directions, it got me no where. I'm coming to you to prevent me from chucking this thing out my window .
So, what I'm asking from you:
1)How do I get out of Low Graphic Mode
2)How do I set up my NVIDIA to play to my TV?
View 1 Replies
View Related
Oct 31, 2010
First off, I am still using 10.04. This hasn't happened to me until now. I was in Vista (I have vista on another partition) doing some things in Photoshop, and I saved it, and done. I restarted to go back into ubuntu and when it was booting it gave me a message saying:
Ubuntu is running in low-graphics mode. Your screen, graphics card, and input device settings could not be detected correctly. You will need to configure these yourself.
If I click OK (there are no other options) it takes me to a screen asking, "What would you like to do?" The options are:
Run Ubuntu in low-graphics mode for just one session
Reconfigure graphics
Troubleshoot the error
Exit to console login
Restart X
View 2 Replies
View Related
May 20, 2011
Ubuntu is running in low graphics mode.Your screen, graphics card And input device settings could not be detected correctly. You will need to configure these yourself. ( If we press OK ) ( A dialogue box appears.) What would you like to do
*Run ubuntu in low graphics mode for just one session
* Reconfigure graphics.
*Troubleshoot the error.
*Exit to console login.
*Restart X. cancel/ok
(If we cancel Commands appear like this
Ubuntu 10.04.2 LTS johnson-desktop tty2
johnson-desktop login:-
(If we press OK another dialogue box appears.)plz help me for solving this problem
View 4 Replies
View Related
Jan 28, 2010
i get this message both when booting from the live usb and once installed (i am asked to chose low graphics mode, or to reconfigure X):
Ubuntu is running in Low graphics mode. error: update configuration to solve
(EE) intel(0): output LVDS enabled but has no modes
(EE) intel(0): no valid modes
(EE) screen(s) found, but none have usable configuration.
View 1 Replies
View Related
Jun 30, 2010
Essentially the title says it all. I have windows 7 installed and have no problems with virtual mode but how would I go about having the computer boot into ubuntu (KDE) then boot the virtual machine only to follow with seamless mode? I don't care if I can see the process work, by that I mean the booting of windows.
View 5 Replies
View Related
Feb 19, 2010
I work on Ubuntu 9.04 and our application requirement is not to go to power saving mode when application is running. I added ServerFlags section to /etc/X11/xorg.conf
Section "ServerFlags"
Option "blank time" "0"
Option "standby time" "0"
Option "suspend time" "0"
Option "off time" "0"
EndSection
This didn't help. Then I tried following commands
gconftool-2 -s /apps/gnome-power-manager/ac_sleep_display --type=int 0
gconftool-2 -s /apps/gnome-screensaver/idle_activation_enabled --type=bool false
I see that it works fine only if I change settings via Settings>ScreenSaver>Power Management in gnome. I wan to do this via script. Can I do this? Which file gets updated when I change display settings via Settings>ScreenSaver>Power Management.
View 2 Replies
View Related
Apr 8, 2009
In Fedora 10, I cannot get to the installer because it shows these messed up strips graphics (its not due to my graphic card, my graphic card is supported 7600gt) in non-quiet install it shows logical errors and i/o errors.
View 12 Replies
View Related
