I have a strange UPnP problem. I'm running myth tv and want to stream data to other things. How to troubleshoot UPnP because I have a feeling something somewhere is blocking it. I've tried doing a tcpdump eth0 host <mac of requesting agent> and not seen anything but ARP requests when I send it, but not when I ask it, just as normal traffic.
View 4 RepliesMy squid version is 2.6.STABLE21 installed via yum on CentOS release 5.4 (Final) 2.6.18-164.el5 x86_64. My configuration is as follows (truncated)
acl hrusers proxy_auth -i "/etc/squid/access/hr.dept"
acl hrsites url_regex -i "/etc/squid/access/hrsites"
acl r-sites url_regex -i "/etc/squid/access/restricted-sites"
acl stream req_mime_type -i "/etc/squid/access/stream"
[Code]...
But even then streaming is not getting blocked.
I'm running a program called Synergy+ to let my keyboard and mouse control multiple computers. One of Synergy+'s features is that clipboard (copy-paste) data is able to be shared, as in copy on one machine, paste onto another. I would like this functionality removed but Synergy+ has no way to disable it. I'm looking for any ideas to block clipboard data from being transferred. Is there a way to block a program from accessing the machine's clipboard data?
View 5 Replies View RelatedI have recently purchased a Wacom Bamboo Pen & Touch tablet and have got it working with Ubuntu 9.10 (Karmic) by following this post: [URL].
I am now trying to trap the actual data coming from the bamboo as I write with the pen and found some threads suggesting that if I do an xxd one of /dev/ttyS[0-4] I should be able to see output. However when I do a "sudo xxd /dev/ttyS0" the xxd command finishes straight away.
If I run the command "xxd /dev/input/mouse1" I can the data coming from the mouse movement so I am expecting to be able to see the same sort of thing coming from the wacom bamboo pen. Both the bamboo and the mouse are USB connected.
Does anyone know if the stream of data coming form the wacom bamboo should go to /dev/ttyS[0-4] or should I be looking elsewhere?
Is there a multimedia application for linux that has uPnP media sharing similar to MS windows media player?
View 6 Replies View RelatedFor system calls, is blocking or non-blocking default in C? Simple question, just am not seeing the answer super quickly.
View 4 Replies View RelatedI have a device that is working on modbus protocol andI have written a small program(with block TCP read method ) to read its registers via modbus protocol.my program is working very well but except those times that I unplug the Ethernet cable or turning off the modbus gateway during programs work.at this time my program stops on recv system call (if it reach this system call exacly when I unplug Ethernet cable or turning off the modbus gateway during programs work).I changed my source to work in nonblock TCP method, at this time with the same situation my program does not stop/block on recv system call but after pluging back the Ethernet cable or resuming the connectivity situation back it reads data incorrectly .this is my code:Quote:
#define DEBUG
#include <fcntl.h>
#include <string.h>
[code]...
Is there a utility to forward ports on a simple home networking wireless router from commandline using upnp?
View 1 Replies View RelatedIt seems I might be having an issue that's a non-issue. I am not able to stream/ connect to a stream using vlc.I've looked at a few walk-throughs; I follow the steps and as often as not I get no error messages but cannot connect to a stream.
View 1 Replies View RelatedI want to block all the outgoing ssh form my machine, i.e my machine will not be able to ssh to any outside machine using iptables. The distro is RHEL, I added the following entry in the iptables but unfortunately it didnt worked, -A OUTPUT -p tcp -m tcp --dport 22 -j DROP
View 13 Replies View Relatedi used the angry ip scan software and found alot of the public ip addresses on our network are accessable from outside when they are not suppose to, For eg printers/ pcs etc. to make a start on locking down the network i was wondering if anybody knew th iptables command to add a rule which blocked all incoming traffic to specific ip adresses on the network and to a range of ip addresses.
View 7 Replies View RelatedA few months ago I have setup a server with three hard disks. The partition mapping the disks as follows:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x7ca36fee
[code]....
Now I have the following problem the LVM file system don't mount properly.If I open the mount point I see only a few files of the LVM disk. If I want to unmount the disk I get the following error:
umount /data/
umount: /data/: not mounted
If I want to mount the volume I get the following error:
mount -a
mount: /dev/mapper/gegevens-Data already mounted or /data busy
I am a complete newbie to linux and Fedora, having previously used Windows/Vista. I have a Netgear router which is configured to allow upnp, and i use deluge as my bittorrent client, though would use either transmission or deluge. I used deluge on windows and upnp worked fine, but now i am usisng fedora with the same settings it doesnt work.
In Deluge (or Transmission) UPnP is ticked and i have limited port range to on port say 57000. In Router config UPnP is ticked. In the Fedora firewall i have gone in and set it up to allow the specified port, say 57000 in other ports.
It seems that with ufw enabled It is impossible for upnp applications to negociate with the network router the ports they need to be opened. Is there any way to make ufw and upnp work together?
View 6 Replies View RelatedI've been trying without success for sometime now to find a linux upnp renderer. I've tried to install gmediarender but it will not install on my laptop. I have tried XBMC but was hoping for something a bit lighter (like geexbox). Something that comes in a live cd form would be best.
View 2 Replies View RelatedAssume: 1) Multi-cpu environment 2) Process that gets interrupted, is the same process that executes the interrupt handler, so I guess technically nothing gets interrupted except what the process was doing before, but it is still executing as it is executing the handler. 3) There is no top or bottom half, when an interrupt takes place the handler is invoked, executes, then return from interrupt, simple as that.
Why would sleeping the handler (puts in sleep queue, context switch to next runnable process) be a bad idea?
How can I block certain countries from accessing my server in any capacity? Is this possible? What do I need to add to my /etc/hosts.deny for this?
View 4 Replies View Relatedi have been trying to change the default mkahawa blocking image without success because simply i cannot find the lockpix.gif directory they are talking about!! i also tried changing that through the server but the results still proved futile.
View 1 Replies View RelatedThe firewall in Fedora 12 seems to block UPnP by default, but opening port 1900 for UDP, as I have seen suggestedes not resolve the problem.have the following three scenarios:Firewall Enabled: Transmission cannot open a port by UPnPFirewall Enabled (1900 UDP allowed): Transmission cannot open a port by UPnPFirewall Disabled: Transmission opens a port via UPnP fineAny ideas? Yes, the port that I'm trying to open is also allowed. Router is a Linksys BEFSR41 v4.3, should you care
View 6 Replies View RelatedI'm trying to use the Banshee remote control application for Android, but there is no option for remote controls in the Banshee application I installed. I used to use Ubuntu and I'm pretty sure I remember it being there. Am I missing a package or something?
View 3 Replies View RelatedI've noticed in my karmic Koala pulseaudio has many options to make my sound discoverable via upnp/dlna server. I've got a ps3 and a Pinnacle Soundbridge, suitable for this protocol and working fine with mt-daapd or ushare. But I would like to use mplayer and making the sound available to my devices. I've activated the options in Pulseaudio (paprefs) but can't play music in my client device and I can't see the server in the lan.
This is my config:
sound Preferences
> output > DLNA/upnp Streaming (stereo)
paprefs
-Tab Network access
click on "make discoverable Pulseaudio network sound devices available locally" & same for "[...] Apple Airtunes"
-Tab Network server
All options clicked on
-Tab Multicast RTP
Enabled "receiver", enabled "sender" and selected "send audio from local speakers"
-Tab simultaneous output
Not enabled
Padevchooser
- Default server: my pc
- Default sink: DLNA/upnp Streaming
- Default source: internal analog Stereo
Can't see any upnp server.
I just ran some system updates today. MySQL was among them. after rebooting. I got a message I haven't seen since I was first installing several months ago. I couldn't connect to the database.
At first, I freaked out because I didn't know what to do. I tried checking my passwords, but I still don't understand all the configuration for MySQL. I tried reconfiguring the myth packages, but couldn't get through the setup. It would just bounce me out after a few attempts because of incorrect password sets.
I finally figured out, from the logs, that MySQL hadn't logged anything since it's 'successful shutdown' after the updates. It hadn't even tried to come on. I started it manually and everything seems to be fine, but how do I get it to start at startup again?
I have a setup with a mythtv backend that streams media via the built in upnp to two xbox 360s. This works perfect at the moment. However I need a command/script that can identify if either of the two xbox's are connected via upnp. I need this so that I can have the system auto shutdown if no one is connected using the existing mythtv sleep wake features. (Basically if a script returns 1 then dont shutdown if returns 0 then shutdown.)
Code:
if upnp is connected then
dont shutdown
else
shutdown
fi
Thanks
Chris
I've got a solid PC w/Xeon dual core, 4gb RAM, and (2) 1Tb Sata HDs - looking to replace a WinXP pc that currently is running PlayOn (for media to the BD player on the TVs) and sharing folders/drives to all the PCs (WinXP, Win7, OSX, and Ubuntu.
I have tried a few distros to get media shared to the BD players, and even a Win7 - but the BD players can't seem to play any of the video files on the newer 'servers' - and only the Win7 even appears to the Sony TV in the living room (even though it can only browse the folders with video files). Another problem with the Win7 being tested for acting as a server - is the Macs cant seem to access the shares (get Access Denied errors).
Wondering if there is any good distro that is mainly setup for sharing files and storage space to all my devices. Thinking of trying FreeNAS, and seeing if I could add the UPnP/DNLA server packages to it?
I have a program called "PortForward" to do the job in Windows... But I've been searching for the better part of 2 hours trying to find one for Linux.
I can use the router's admin interface, but it limits the number of forwards you can add. And I would like to be able to add more simply because the applications I need to forward aren't already included.
i am experimenting with my squid config . but i dont know how to make this confg to work.I wanted to Block the websites on term of the "words''like if any one is accessing to Porn site then the words that come out of porn is blocked. [ mostly used examples]note:i can blocked single site at a time.second if there is user 10.10.10.21 is downloading MP3,AVi,mpg how can i not allowed him to download that both ways via right clicking download and direct download.
View 1 Replies View Relatedcompany has asked to block some pages on google.co.in. i can not block the entire domain.is there any way to block specific webpage like
View 2 Replies View RelatedI want to block yahoo mail chat in dansguardian. I had google few thing I come to know that I need to do this. Locking DNS lookups to webcs.msg.yahoo and httpcs.msg.yahoo by returning 127.0.0.1. I haven't have dns configured. So what I need to do solve this problem. I had tried by making an entry in etc hosts file. but it didn't worked.
View 3 Replies View RelatedI've noticed in pulseaudio have many options to make my sound discoverable via upnp/dlna server. I've got a ps3 and a Pinnacle Soundbridge, suitable for this protocol and working fine with mt-daapd or ushare.But I would like to use mplayer and making the sound available to my devices. I've activated the options in Pulseaudio (paprefs) but can't play music in my client device and I can't see the server in the lan.this is my config:sound Preferences
> output > DLNA/upnp Streaming (stereo)
paprefs
-Tab Network access
[code]....
I'm not sure what changed but when I recently upgraded via yum to Kernel 2.6.34 none of my uPnP or DLNA apps show up on my tvs (Sony TV and PS3). Booting an older version, i.e. 2.6.33 solves the problem with no other changes. I use MediaTomb, MythTV uPNP server and Serviio. All work fine except with the newest kernel.
View 8 Replies View Related