General :: UBUNTU Install Failed / Missed Grub Page
Mar 20, 2011
I just tried to updated my UBUNTU 10.04 to 10.10.I missed the page where I was asked to reuse the current GRUB information.The system hung after trying to load the new GRUB.I rebooted, and got an error about Configuration defaults for gnome power configuration not correct.I googled this, and have lost of disk space. The other suggestion was to remove and reinstall the gnome power app.I am not sure if this is the real problem, or if it is something to do with GRUB.There is some information on the system that I don't want to loose. I can get to a system console.
I tried a 9.10 -> 10.04 upgrade that went fail. I can now get it to the login screen where it gives a hard freeze. Same with recovery. I can get to a command line, but not with networking so
So I finally said screw it, I'm going to doa fresh install. I downloaded and burned 10.04 at work. Not, it is giving me an installer error when I boot from it, but then it will load the desktop from the LiveCD.
All I really want to do is grab some data that I didn't get when I backed up by home directory, then I can go back and do a fresh install. I can even download a new 10.04 CD if I need to because the installation files are screwed up or something.
The problem is that some of the files have permissions on that that show as an 'X' on the icon and it won't let me copy them to my USB backup drive.
How can I copy the files marked with an 'X' that have this permission issue?
I have a few questions on installing of mydns on page-5 of Till's guide: (The Perfect Server - OpenSUSE 11.1 [ISPConfig 3] - Page 5 | HowtoForge - Linux Howtos and Tutorials)
I tried to install debian on my system using a small image at first that would download all the necessary components during the install. It loaded everything except Grub, and wont boot. I need to rescue this as the downloading of all the components took ages and I don't want to do that again.
I have been away from linux for some years, but now I'm once again back with Ubuntu 10.04. I used to run Gentoo in 2000 and knew my commands, but now that the world of linux has progressed a bit further, aren't there many new commands to learn? Do you know a list of linux shell commands that are in broad use now and which didn't exist 10 years ago?
Toward the end of installing Ubuntu 10.10 32bit (Alt CD) on my iMac 11,1, the installer asked me to type in the location for installing the grub boot loader.
I told it to use /dev/sda3 and it immediately failed. I'm still in the installer. Can anyone suggest a solution?
Here are my partitions on sda:
...from the shell in the installer, there is no grub.cfg in /target/boot/grub.
I cannot boot into either OS. Grub failed on install. How to boot back in to windows. From live Ubuntu CD I can see that all files are there, however it shows the disk to be unrecognized and unallocated. There is an X by the root folder of my C; drive. Windows recovery console can't fix it, windows install can't fix it, and windows repair can't fix it. I guess I need to reconfigure my boot drive properties to recognize the ntfs; I don't know what to do. I would like to boot back in to windows partition the drive correctly and start over , is this possible?
I started the upgrade and the system is nearly completed but I there is a problem with GRUB.Most likely since I am dual boot with win7. So right now I have a pop-up message that says...GRUB failed to install to the following devices:/dev/sdbDo you want to continue anyway? ect ect ect...I have not rebooted and completed the installation yet as I figure its probably easier to fix this now while I have the full system up and running vs having to fix it via live cd.
I've been trying to install Natty (64) over the last couple of weeks and am having problems that I've never had with any distribution before. At the end of each install, I get the following error:
Code: Executing 'grub-install /dev/sda' failed
It then gives me the option of installing grub somewhere else, which I don't want, but it doesn't work anyway, or leaving without a boot loader, which isn't really desirable.
At first I thought it might be something to do with my previously complicated quad-boot partition layout, so I simplified that to a fairly regular Windows and Ubuntu only, but no luck.
Grub also fails when attempting to upgrade 10.10.
I've tried restoring Grub2 using chroot amongst other things which doesn't work.
I installed a new Ubuntu OS in my computer, (I downloaded it yesterday) on a dual boot pc (windows xp) Installation went smooth until it reached grub-pc. It was installing grub-pc (1.98 lubuntu6). It hanged there for several hours. Finally I interrupted the installation. When I went to the installed packages I got a message telling: Grub-PC 1.98 Lubuntu 6 Failed to Install or Upgrade. I'm pretty new to Linux so I know nothing about it, but I wish to go away from Windows XP.
i tried my first linux installation with Fedora distro. using the live 64 usb boot version, everyhing looked fine. BUT i had issues with WINE so by recommendation, i went with Ubuntu and flushed Fedora. So, technicaly, the install works fine, during the process of installing from the live usb 64 bit 10.4 ubuntu. BUT at the end, when installing GRUB, it just simply failed! thats's a shame for me what i can tell you is the following. (thats what i think is my problem, but i need some expert help tho!)
my motherboard is a ASUS, im using 3 HDD 500GB sata2 drive, configured as a RAID in the bios, strip 0. so it presents to the OS one partition of 1.5 TB. Fedora detected it correctly, and was able to install grub on that now, during the Ubuntu install, i can chose to pick up a partition that was not used on my 1.5 TB ( i reduced my partition to 1TB and allowed 500GB to linux). Windows 7 reside on the first partition. on this disk, partition 1 is a 100MB windows bootmanager. partition 2 is windows 7 itself 1TB.
during the install of ubunto, i tell him to create a / partition, using 480GB as the third partition, and i created a 4th partition as a swap for linux. the install process the information, install the DATA on the third partition... BUT grub, can't !!! it failed... it keep looking for a /dev/sda disk... when installing GRUB, i can chose the drop down, for the 1.5TB disk, and when i press OK, he just simply try again to access /dev/sda disk... which is full of course and within a BIOS raid..........
I just tried to install Ubuntu 10.04 on my windows machine. Unfortunately there was an installation error and now the computer will not boot up in windows anymore (I get grub error 17). I had Ubuntu 7.04 before, but when installing 10.04, I deleted the 7.04 partitions. Is there a way to recover the ability to boot into windows?
ok basically i have 2 hard disks one Seagate 500GB Sata, and one Western digital SATA my windows 7 is on the western digital and i think thats sda1, and opensuse is on the seagate the grub loader is on the western digital, and earlier today everything booted fine, till i went to boot windows
i had 2 "other" options, i selected the first one and it failed, the second other booted to windows, after about 3 hours on windows and doing nothing. i went to reboot and go to opensuse, and got a "grub loading stage 1.5., please wait" and it loads forever and nothing happens, it just idles im currently on the livecd just to get an operating system to use to get the net
Im trying to install Debian on my server. Some hardware descriptions:
- Inel Xeon processor - 03:01.0 RAID bus controller: Adaptec (formerly DPT) SmartRAID V Controller (rev 01)
There is configured by hardware one RAID 5 on four scsi disks of 73GB. I tryed with Lenny and Squeeze versions and both presented the same error when the install try to install grub:
main-menu[1250]: INFO: Falling back to the package description for auto-install main-menu[1250]: INFO: Falling back to the package description for ai-choosers main-menu[1250]: INFO: Menu item 'grub-installer' selected
I was trying to install ubuntu 9.10 as a dual boot system with windows and I recieved this error message: The Grub package failed to install into /target/. Without the Grub boot loader, the installed system will not boot
This Error comes up after 94% of the install. I also cannot seem to get the side by side install option to work (sometimes this option appears sometimes it does not) I am not sure but I beleive seome of the install files have been placed on the hard drive because I only get the option now to install on the hard drive and totally wipe clean or the emptiest hard drive. So how would I get the possible Ubuntu install off the Hard drive. I have used this CD to Install before it has no scratches therefore should work. Also If I have Win Xp on a Raid 0 will the Ubuntu 9.10 install ?
I have a Dell Inspiron 1721. Recently I replaced Windows Vista Home Edition (32 bit) with Slackware Linux 13.
Lilo wouldn't work, when I turned on the computer it printed "Li" and then 20 lines of 090909... and then the computer would hang up. So I just used my Slackware-boot-flashdrive-thing that I created during installation to boot my computer and told myself that I would fix it later.
Also, when I installed, cfdisk (or it might have been sfdisk) complained that /dev/sda did not contain a valid MS-DOS partition table. fdisk still worked, so I used it to create a new table, and cfdisk worked fine and the installation went along normally.
I reinstalled Slackware about two days later (I realized that I had installed the 32 bit version instead of the 64 bit). Lilo still didn't work.
I thought it might be something wrong with the Slackware DVD, so I downloaded and attempted to install about 4 different distributions. None of the CDs would work. The computer would start up, Linux would start to load, and the computer would freeze.
Xubuntu was the only distro I had that I could get to install. Halfway through the installation, (Surprise!) I got an error, something like "Package Grub failed to install, you will not be able to boot your new operating system".
The rest of the install went fine, so I restarted my computer and tried to use another one of my CDs to boot Xubuntu. I got the error "/dev/sda does not contain a valid partition table", and later "ext4-fs: checksum failed on dev sda at sector...", and "please specify a valid partition for root=". I am absolutely positive that I entered the correct partition, I triple checked and entered other partition names to make sure.
I'd also like to add that the computer makes horrible crunching noises when it starts up and when I do stuff like press keys. So is something seriously wrong with my hardware, or is there another explanation for all of this? Because I really don't want to have to try to repair the computer and can't pay to have it repaired.
the laptop of my friend runs ubuntu through wubi. The system suddenly freezed and she restarted it manually. After doing a check disk and automatically repaired some packages(unfortunately she doesn't remember what exactly, only just inode information appeared), she can't log in as when she types her username and password the answer is authentication failed. We tried to change the password through recovery mode but nothing happened.
1. Do you have something to propose to solve the login problem? 2. If not how can i access and back up her ubuntu documents through windows?
I installed lilo and it boots. How do I installed grub again. Do I just use synaptic manager to uninstall lilo and install grub?
[code]....
I know grub2 does not work, giving me error: ntoskrnl.exe missing or corrupt. I did install grub-legacy and it worked, but I had to re-install squeeze due to other problems. So, now I want to replace lilo with grub legacy.
I don't know what bugzilla wants to know. I tried to create a new report, but I failed at the first page/question. THe page ask me to enter a classification. But I don't know want that could be. I check multible times but I got always just a big red EM. What's to enter at 'named tag' and at 'to bugs'?
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
So I've been researching this on my new NAS. I just tried to register the IP on the new system to have an issue pop up that says: "msk0: watchdog timeout (missed Tx interrupts) -- recovering" The error repeats then ends with no set IP. I tried the loader.conf fix but I cannot write to the system its installed on (embedded on a harddrive + data + swap) but it gives me a issue with write privileges which I thought would have been fixed by chmod +w /cf.
I just updated to Slackware 13.1 last night (clean installation). However, when it came to setting up LILO, I chose "no" to the UTF setup when I usually choose "yes." I think choosing no put the line below in LILO.conf:
Code:
append = "vt.default_utf8=0"
What's the LILO setting if one chooses "yes" instead of "no"?
I'am using Ubuntu 10.10, and wish to install a Debian OS.I downloaded the file "debian-6.0.1a-amd64-netinst.iso.(My motherboard is a 945CG-F7 with INTEL PENTIUM DUAL CPU E2160)I recorded the file on CD as "iso" (following instructions from Internet).Grub tried to read the CD but than started Ubuntu OS.
I installed a suse 11.3 on my acer laptop and it worked just fine for two days.I was able to use internet as well though wi-fi driver i still had to figure out.This morning when i started it, it gave me an error like this:- Failed to load grub Error 18 now from what i understand is the solution is to downsize the harddisk partition used by the linux root to somewhat 10gb.Mine is about 40gb.
So i thought why not re-install the os again.But even after changing the bios setting to boot from cd-rom and putting in the suse dvd still its not booting from dvd and continously giving this error Error 18:Selected cylinder exceeds maximum supported by BIOS and then it comes to a command prompt like this grub>
I want to combine 4 ps(or pdf) page to single page and for this i have try a2ps command as:
a2ps -4 1.ps 2.ps 3.ps 4.ps -o outfile.ps
Event through it divide the page into four section. But only give one output of my four input. other three section is blank. Is i am doing some wrong or Is their any other command to do so.
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
When I try to install Ubuntu OS everything works well to the last step. At last step it ask me for my user name while it is installing the OS at background. Then it says "ready" but nothing change. I can move mouse over the screen but there is nothing to push like "finish installation button" or something like that. I wait for 2 hours and nothing changed. There is no error code. Then I decide to reset Pc and try to see if it installed grub or not, but there is no grub at booting page. I started to OS installation again and same problem occur for 6 trials. I have intel i3 proccessor with graph card and gigabyte h57m-usb3 motherboard. OS: Ubuntu 10.10.
