General :: The Connection To The Server Was Reset While The Page Was Loading
Aug 3, 2010
i'm using fedora 13 OS and installed web invoice application in my server. whenever i open the site, the problem on "connection to the server was reset..." is persistent. i was advised to clear the cache which i did. it work for a while but with just a few page loaded the same problem occur and i need to clear the cache. again i found a suggestion in the internet to add post_max_size = 48M file_uploads = On upload_max_filesize = 192M to the php5.ini. i also did this in my server, but the same problem occurs.
Why do I keep getting this error when I try to search something on google. It happens when my query has around five or more words. If a search for just one or two words I don't get the error. I know it's not google because it happens with bing, msn, and yahoo too. The connection was reset The connection to the server was reset while the page was loading.
* The site could be temporarily unavailable or too busy. Try again in a few moments. * If you are unable to load any pages, check your computer's network connection. * If your computer or network is protected by a firewall or proxy, make surethat Firefox is permitted to access the Web.
I have redmine 1.01 on Suse 10, some days back it was running fine. but now it's taking too much refresh to load a page properly. How will I go back to normal page loading ?
I am a system administrator and i have configured squid server at the server side.Now i am facing a problem that these two websites are not accessible through squid transparent proxy server while they are accessible when changing the gateway.The websites are following:-
[URL]
This type of error message comes ERROR The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: * Read Error The system returned: (104) Connection reset by peer
how to re-set the page numbers of a pdf file within evince (without modifiying the pdf file). The point is that I am reading an article, and I would like the set "page 1" as "page 43". modifying page numbers of a pdf file is a bit tricky. So, I want to avoid that. What I wanna do is to make evince "think" page 1 is page 43.
I have been using ubuntu netbook 10.10 on my Dell Mini 9 for the past few month without any problem; it connects wirelessly to the internet via a wireless router. Yesterday in the middle of web surfing, suddently firefox cannot see any website outside of my home network (Firefox displays Server not found page). No help when I rebooted a few times and connect to my home network via wireless or even wire cable; it can access files in my network file server (DNS-321) but not the internet. My desktop computer running Windows Vista and ASUS media player has no problem accessing the internet.
When I do an amcheck, I get this Amanda Backup Client Hosts Check WARNING: noname.com: selfcheck request failed: recv error: Connection reset by peer Client check: 1 host checked in 0.022 seconds. 1 problem found.
I am using bsdtcp. I get an ack error if I switch the client to bsd authentication. What should I do, how do I fix it? I read that I should enter servers address to hosts file in /etc/ directory? Here is the log in /var/log/messages:
i got this problem every time i open the particular web page after i have opened some pages in my server. when i start to log in again in the same site, the problem pops up although this was not so when i first logged in. i was advised by the personnel in the web host to clear the cache in my browser which i did, then, i was able to log in again. however, when i reached the particular page again, the problem on "connection to the server was reset" erupts. i found in a suggestion in the internet to add this code in the php.ini which i also did post_max_size = 48M file_uploads = On upload_max_filesize = 192M
My webcam works AWESOME when it works. However, occasionally it produces no video for Ubuntu based applications. Cheese, aMSN, Skype or anything else for Ubuntu Lucid.
I have tried power off & cold booting. Moving from one USB port to another, warm booting etc...
The only way to make it work instantly is to boot into Windows XP and access the Webcam. Then upon rebooting to Ubuntu the cam works perfectly again.
It's not a matter of Ubuntu finding and recognizing the cam. It always does and TRYS to activate the cam (the led comes on when loading any cam application) but it produces no video.
Is there a command I can use to force a RESET of the video device so I can stop loading Windows?
With the last several updates to Firefox, loading pages from several different sites slows down to (slower than) a crawl - taking sometimes minutes. Most of the time, this occurs loading ads.
I don't remember what release this started with, but I didn't have problems before, and I don't have any problems loading the same web pages on IE8 (running on XP). This is the same on F12 and F11.
I have tried changing some of the securty choices, even tried blocking certain sites, but no luck.
Also, several times after a download, firefox freezes, although the rest of the desktop is okay.
When I start firefox the home google page will load and all is well. When I go to any other page (ex. cnn.com, gmail, etc) the page will load graphically, but then continue to load forever. At this point I cannot click on anything in firefox including the drop-down menus.I must force quit at this point.
I updated last night even though I was already using firefox 3.6. I had a problem with flash last time I updated. I reinstalled firefox and went back to firefox 3.5 without any success.This makes me think that the problem is something other than firefox.I am on a Toshiba Satellite L505-S5965 running ubuntu 9.10. I'd give you more information but when I click on system and go down to "About Ubuntu" it loads forever - this is another problem I need to fix. Ugh. I should never have updated
Linux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server
The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?
# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf
In ubuntu however, page loading is Unnaturally slow and "[url]...." (or whatever), returns result every 4 seconds. Strange is that Skype and online games (read HoN) work fine, with only problem is store loading 10seconds and during logging time. I will post all the command output.
Code: sudo iptables -L -v Chain INPUT (policy DROP 5411 packets, 658K bytes) pkts bytes target prot opt in out source destination[code]...........
I have a page which is going to be internationalized, and available in more languages. It contains PHP scripts to load, let's say, current user's data from database and the internationalized content itself, like "Welcome user" message. The problem for me is the fact, that internationalized content is not continual, and it's all over the page mixed with php scripts.
I don't want to use eval(). I've got 2 , they are, however, not good enough. 1. One file per language version, with scripts included - there will be many languages, so there would have to be many files with redundant data. Also if I wanted to change structure of script, I would have to change it in all pages. 2. Load international data from db, while scripts are on the page - not sure about good database structure I mean, how would I get the right content from database? (content would be split into rows, columns, or something?)
When running Firefox, page loading is very slow (e.g. taking nearly a minute for a ..... video to start; even gmail is slow). This is in contrast with my performance when using, e.g. linuxdcpp (file sharing), where I get speeds over 300kbps. Here is some relevant information:
but ive two problems. 1st: The first is how do i change the default page on load up of localhost.eg when i enter the http://localhost/ i get the usual it works symbol.this is because its loading the index.html file in my var/www/ folder.i dont want too create another index file, but how do i change the configuration too load up a different one like home.html2nd: i tried installing sudo apt-get install phpmyadmin and for the most part it worked.but nothign comes up when i go to http://localhost/phpmyadmin/
I've just installed rutorrent following this guide: [URL] As I load the rutorrent site on my server it actually kills rtorrent with this error: Caught Segmentation fault, dumping stack: Stack dump not enabled.
I'm having problem running open SSH. I have installed SSH, on my system, but when I run:ssh localhost.I get the error :Read from socket failed:Connection reset by peer.I get that same error when trying to connect from a different local computer.When I attempted to restart the service by typing: sudo /etc/init.d/ssh restart.I proceeded to generate a new set of keys by running, ssh-keygen -b 1024.But I get the same errors after doing so.
I'm still kind of a linux newb, so I might just be missing a little bit of knowledge here, but I've been having some real problems getting my machine to connect to my wireless network under Ubuntu 9.04.
OSes: Windows XP Home Edition (on Maxtor internal drive) Ubuntu 9.04 (on WD internal drive)
I don't think my video card would make any difference, so I won't list it on here...
Anyway, what happens is I try to connect (I select the network SSID from the pull-down list in the NetworkManager panel menu), and it seems to connect okay to the router, but I can't get out to the net. I can pull up a terminal and ping the router's address, but I get a "Destination Host Unreachable" message. It's as if, to the computer, the router isn't even there on that level, but it can still somehow connect to it.
Now, here's the strange part. If I reset the router from another (Windows) computer on the network (specifically, the one with a wired connection to it), then I can connect just fine and I can get out to the internet.
Even if you don't know specifically, but have some good ideas as to what might work, that's fine too. I hate having to do this every day, as it affects everyone's internet connection. Granted, it's not like I'm in a strict business situation with tons of machines and multiple access points, but there are 3 of us in the house and we all share internet access from the same router (as I'm sure most people do), and I feel kind of guilty having to interrupt everyone's connection, if even only for about 30 seconds just so I can get a net connection under Linux.
Windows connects to the router/internet just fine, btw. No problems there. I'm also using a NetGear WN111 USB wireless adapter, with the Windows drivers under ndiswrapper.
I am trying to get fedora-ds running on a machine. I can't log onto the console at all. If I use the command line below the log shows multiple instances on the following lines. fedora-idm-console -D 9 -x nologo
My system just crashed. kduffy101@kduffy101-desktop:~$ firefox WARNING: pipe error (3): Connection reset by peer: file ./src/chrome/common/ipc_channel_posix.cc, line 404 Segmentation fault kduffy101@kduffy101-desktop:~$.
I've happily been using rdesktop to access my MS Vista desktop from Ubuntu (Hardy) for a few months until a couple of days ago when it stopped working. Now if I try connecting I get the following:
[Code]....
I don't believe anything's changed on the client (Ubuntu) side. The Vista box is occasionally connected to a corporate intranet via VPN and it was after such a session that rdesktop stopped working, so perhaps a Windows group policy was modified during the session. I've checked the basics - can ping 10.1.1.2 from Ubuntu, can access port 3389. Have deleted ~/.rdesktop and ~/.tsclient.
Digging around the Vista client I noticed in Control Panel > System Properties > Remote that in the Remote Desktop sub-panel the Allow connections only from computers running Remote Desktop with Network Level Authentication setting is enabled and that the other two are greyed out. Now, I don't know whether this setting has been changed but I suspect that it might be the problem.
Unfortunately, I don't know enough about Windows to know how or even whether I can change this setting to Allow connections from computers running any version of Remote Desktop (less secure) I've poked around the group policy editor (gpedit.msc) but no joy.
