General :: Connection Reset By Peer" After Installing Latest Version Of Openssh Under Debian?

Jan 21, 2010

"Read from socket failed: Connection reset by peer" after installing latest version of openssh under debian. What to do?

View 5 Replies


ADVERTISEMENT

Ubuntu Networking :: Installing And Setting Up OpenSSH - Connection Reset

Feb 4, 2010

I am running Ubuntu (Karmic) and did the command: "sudo apt-get install ssh", In an attempt to download, install and setup OpenSSH. This installed both the client and server and during setup actually brought the daemon up and running as well. I then attempt: "ssh <myusername>@localhost" and it prompts me with a password. I enter the password, hit enter and immeditaly see the following results:

Read from remote host localhost: Connection reset by peer. Connection to localhost closed. I'm fairly certain that it is not on the client end as I can connect to other machines through ssh. I've tailed all the logs, messages, dmesg etc and nothing seems to be out of order, or even remotely related to shh or connections etc. My desktop machine had no (as in zero) issues installing and setting up OpenSSH, and connections can come and go as normal.

View 3 Replies View Related

General :: AMANDA Backup - Recv Error: Connection Reset By Peer

Jun 25, 2010

When I do an amcheck, I get this Amanda Backup Client Hosts Check WARNING: noname.com: selfcheck request failed: recv error: Connection reset by peer Client check: 1 host checked in 0.022 seconds. 1 problem found.

I am using bsdtcp. I get an ack error if I switch the client to bsd authentication. What should I do, how do I fix it? I read that I should enter servers address to hosts file in /etc/ directory? Here is the log in /var/log/messages:

[Code]....

View 1 Replies View Related

Ubuntu :: Pipe Error 3 - Connection Reset By Peer

Jul 6, 2010

My system just crashed.
kduffy101@kduffy101-desktop:~$ firefox
WARNING: pipe error (3): Connection reset by peer: file ./src/chrome/common/ipc_channel_posix.cc, line 404
Segmentation fault
kduffy101@kduffy101-desktop:~$.

View 4 Replies View Related

Ubuntu Networking :: Rdesktop Connection Reset By Peer

Jul 15, 2010

I've happily been using rdesktop to access my MS Vista desktop from Ubuntu (Hardy) for a few months until a couple of days ago when it stopped working. Now if I try connecting I get the following:

[Code]....

I don't believe anything's changed on the client (Ubuntu) side. The Vista box is occasionally connected to a corporate intranet via VPN and it was after such a session that rdesktop stopped working, so perhaps a Windows group policy was modified during the session. I've checked the basics - can ping 10.1.1.2 from Ubuntu, can access port 3389. Have deleted ~/.rdesktop and ~/.tsclient.

Digging around the Vista client I noticed in Control Panel > System Properties > Remote that in the Remote Desktop sub-panel the Allow connections only from computers running Remote Desktop with Network Level Authentication setting is enabled and that the other two are greyed out. Now, I don't know whether this setting has been changed but I suspect that it might be the problem.

Unfortunately, I don't know enough about Windows to know how or even whether I can change this setting to Allow connections from computers running any version of Remote Desktop (less secure) I've poked around the group policy editor (gpedit.msc) but no joy.

View 9 Replies View Related

Networking :: Cvs - Login Aborted - Reading From Server - Connection Reset By Peer

May 26, 2010

When I try to connect to cvs server this is the error message I get.

I also tried cvs -d server:newuser@localhost:/cvs/CVSROOT login but getting the same result

My repository is in /cvs/CVSROOT

I also tried changing /etc/xinetd.d/cvs with different options, current it looks like this:

And my /etc/xinetd.conf is

cvspserver stream tcp nowait root /cvs cvs --allow-newuser=/cvs/CVSROOT pserver
defaults

# The next two items are intended to be a quick access place to temporarily enable or disable services.
#
# enabled =
# disabled =

View 5 Replies View Related

Server :: Read Error The System Returned: (104) Connection Reset By Peer

Mar 22, 2010

I am a system administrator and i have configured squid server at the server side.Now i am facing a problem that these two websites are not accessible through squid transparent proxy server while they are accessible when changing the gateway.The websites are following:-

[URL]

This type of error message comes ERROR The requested URL could not be retrieved While trying to retrieve the URL: [URL] The following error was encountered: * Read Error The system returned: (104) Connection reset by peer

View 4 Replies View Related

Ubuntu :: Xinit: Connection Reset By Peer (errno 104): Unable To Connect To X Server

Oct 2, 2010

when i run "sudo startx" i get the message:

"(= Log file: "/var/log/Xorg.0.log", Time: Sat Oct 2 15:33:49 2010
(= Using config file: "/etc/X11/xorg.conf"
(II) Module "ddc" already built-in

[code]....

Fatal server error:

no screens found

waiting for X server to begin accepting connections giving up.

xinit: Connection reset by peer (errno 104): unable to connect to X server
xinit: No such process (errno 3): Server error."

My version of ubuntu is 8.04 and the video card is 82G33/G31 Express Integrated Graphics Controller.

View 9 Replies View Related

Ubuntu Servers :: SSH Error: Read From Socket Failed: Connection Reset By Peer?

Dec 8, 2010

figure out this error?

Code:
kradalby@hpcompaq6530b-laptop ~/.ssh $ ssh -vvv -p 110 kradalby@dfekt.no
OpenSSH_5.5p1 Debian-5+b1, OpenSSL 0.9.8o 01 Jun 2010

[code]....

View 3 Replies View Related

Server :: Amanda - Selfcheck Request Failed: Recv Error: Connection Reset By Peer

Feb 22, 2011

when i ran amcheck DailySet1 as backup user and got these messages:

[Code]....

View 3 Replies View Related

Debian Installation :: Installing Latest Version 7.5 Over UEFI

Aug 22, 2014

I tried to install the latest version of Debian from a Live USB on my new laptop (UEFI). Everything goes well during installation (EFI partition, grub-efi, etc), but after restart, my computer does not boot into HDD.

How to debug the problem or fix the boot loader. What is the problem in standard installation? and how can I fix the boot loader?

View 3 Replies View Related

Debian Configuration :: Installing Latest Version Of Clamav ?

Jan 18, 2010

I'm trying to install the latest version of Clamav (0.95.3), but I'm getting the following error messages in Synaptic after adding the recommended repository to my sources:

Here's a listing of my sources:

View 3 Replies View Related

Ubuntu Networking :: Port - "connection Reset By Peer" Error

Jan 27, 2010

I have an external hd attached to my one computer at home, use DynDNS to give it a static address, and can usually ssh into the machine fine. I ran update a few days ago and now have the much-aligned "connection reset by peer" error. I checked the machine and made sure everything was "normal;" e.g., checked ssh config for the port change (correct), doubled-checked ufw to make sure the port was open (it was), etc. I ran nmap on the machine and it said the port was open. This morning when I arrived at work, I ran nmap on my machine here where I've been unable to connect and its results were a little surprising: the port I specified at home and was demonstrated as open is not. WTF?

View 9 Replies View Related

Ubuntu Networking :: Ssh "Connection Reset By Peer" - Write Failed: Broken Pipe

Feb 9, 2010

which cropped up today after no changes to the system: I can successfully ssh into my ubuntu 64-bit 9.10 machine (via OS X with iTerm), but after about 30 seconds, the connection drops with the message "Connection reset by peer Connection to xx.xx.xx.xx closed".

If I then try to immediately ssh back in I get: "Write failed: Broken pipe". If I try to immediately ping the machine instead, I cannot ping it until the ~10th try. Eventually I can log back in again, only to be kicked off after between 5 and 60 seconds. I called the network people and their are no known issue right now with networking. The networking on the ubuntu machine is otherwise fine, it seems. In the /var/log/auth.log file, it simple says:

Quote:
Feb 9 14:19:20 harriet sshd[4134]: Accepted password for xxx from xx.xx.xx.xx port 55105 ssh2
Feb 9 14:19:20 harriet sshd[4134]: pam_unix(sshd:session): session opened for user xxx by (uid=0)
Feb 9 14:19:28 harriet sshd[4046]: pam_unix(sshd:session): session closed for user xxx

The solution I come across to a similar problem is to add a "ClientAwakeInterval" number to sshdconfig, but this (as expected) doesn't fix my problem.

View 1 Replies View Related

General :: Again WPA Connection Even After Changed To Latest Version?

Apr 1, 2010

I am using hostapd, wireless tools with madwifi for my wireless ap in my board. The WEP, WPA-PSK connections and communications between my board with linux and my desktop PC, Windows XP SP2 (with Olitec USB wireless) are fine. But when I configured the WPA type, the connection seems established but shows the status "TKIP - Key Absent" in the security dialog box. Anyone faced this problem? Am attaching the conf files and the connection status. In the AP side am complaining . I am using the in built radius server conf with the hostapd 0.4.7

[Code]...

View 1 Replies View Related

Ubuntu :: Error While Getting Peer-to-peer Dbus Connection: The Name :1.219 Was Not Provided By Any .service Files

May 26, 2010

When I plug in my iPhone to my 10.04 machine, it's recognized. I can always drag music from the iPhone to the Music collection in Rhythmbox, but 9 times out of 10 dragging the other ways gives me this error:

"Error while getting peer-to-peer dbus connection: The name :1.219 was not provided by any .service files"

View 2 Replies View Related

Fedora :: Installing Frostwire Or Other Peer To Peer Programs?

Jul 11, 2010

Where do I get Frostwire to install? None of the repos I have have it.

What are other popular peer to peer programs?

View 14 Replies View Related

General :: Automated Way Of Installing The Latest Version Of Flash For Firefox ?

Jun 13, 2011

I'm using Ubuntu 11.04. I'm searching for an automated way of installing the latest version of Flash for Firefox. We are using our machine as a testing server and it would be nice to be assured we always have the latest version of Flash instead of having to manually update it whenever Adobe comes out with an incremental update.

View 6 Replies View Related

Networking :: Multiple FTP Upload Socket Error "Connection Reset By Peer: Socket Write"

Jan 31, 2010

I am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error

I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?

View 1 Replies View Related

Debian :: Recompile Openssh-server With Different Version ?

Dec 26, 2009

I would like to recompile the openssh-server with a different version string. I download and compile the source, but so far I have only been able to compile and run the client. Not the server.

Steps taken:

Is there a flag or option I need to specify to insure that it creates the sshd?

View 1 Replies View Related

Fedora :: Installing Latest Firefox On Old Version

Dec 13, 2010

I am new to Fedora and having trouble installing the latest tar file from Mozilla. I am familiar with basic Linux commands and the message I received when after downloading the tar file and extracting it was error while loading shared libraries: /root/firefox/libxul.so: cannot restore segment prot after reloc: Permission denied. I do not have the latest version I tried to yum update and it did not work.

View 6 Replies View Related

Debian :: Openssh - Connection Refused

Apr 13, 2016

When I connect with my vps server through openssh, doesn't establish connection. Openssh is active (see its status), port 22 is open, the sshd_config file is the same of original copy (I have saved one in the case I did a mistake) the only line different permitrootpassword is set on ''no'', there isn't a firewall that block ssh connection and with other remote desktop control like remmina works well.

View 13 Replies View Related

Ubuntu :: Installing Latest Version Of K9Copy (Tar Files)

Jan 19, 2010

I am trying to install the latest version of K9copy, but the only available version is in the .tar.gz file package. I placed the folder on my desktop and extracted the files. Now I have the .tar.gz file and the extracted files on the desktop. I need to install the files, but I don't know which command to use or what to do to get any commands to work.

(Keep in mind that the extracted folder is named 'k9copy-2.3.4-Source.tar.gz')
./configure
make
make install
This seems to be the most common answer to install the files, but it NEVER works, nor do I understand where the package files come into play when I type this command into the terminal.

View 9 Replies View Related

Ubuntu :: Display Out Of Range After Installing Latest Version

Aug 4, 2010

I have reloaded windows xp and now after installing ubuntu latest version, I get a boot menu that gives options. if I select the Ubuntu option, within a few seconds(2)the monitor shows "out of range"! However it is possible to get a command prompt from this menu,(Grub)by pressing "C" then Tab, which lists about 30 commands! But I cannot find what command will overide the ubuntu boot display setting! yet if it is possible in the disc boot F6 menu, then it follows that it must be possible in the hard disk boot menu? (ie nomodeset available on the disk F6, so using F6-nomodeset on the disk allows me to install or run from the disk, which then runs perfectly) Only I cannot make changes in the Ubuntu live that runs direct from the disk, to the installation on the hard drive. My Monitors Max is 75hz 1280x1024, LCD. And although not the latest model, Its still relatively current. Windows from the boot menu works fine.

View 1 Replies View Related

General :: OpenSSH Server Reporting Wrong Version?

Aug 3, 2009

My Fedora Core 8 server came with OpenSSH Server 4.7p1 installed. I could not find a YUM package or RPM for 5.2p1, so I installed it manually and rebooted. Now if I do a version check with "sshd -v", it reports it's version as "OpenSSH_5.2p1", but if I connect with Putty, it reports "SSH-2.0-OpenSSH_4.7". Do I have two versions of OpenSSH running or what's going on?

View 2 Replies View Related

CentOS 5 :: Installing Latest Version Of Eclipse And Changing Where The Menu Item Point

Feb 4, 2010

I am running centos 5.4. I just installed eclipse from Application,Add/remove software. The version that installed was not the latest version. I can remove the version I just installed but how should I install the latest version? I was able to dl the lastest version but it came in a .tar.gz file eclipse-java-galileo-SR1-linux-gtk-x86_64.tar.gz When I unzipped it, there was no install option but I was able to run it from the tmp folder.

I want to add a menu item under Applications, Programming to link to the latest version that I just downloaded but I haven't been able to figure this out. The 2 question I have are this: 1- Is there a way to have the latest version show up under Application,Add/remove software so that I can just uninstall the version I installed and get the lastest?

2- Is there a way to install the downloaded version and have it show up under Application, Programming? I love this OS but it's taking me a while to figure out some simple things.

View 4 Replies View Related

Debian :: How To Upgrade EMacs To Latest Version

Sep 18, 2010

Debian 504 64-bit
Emacs 22.2.1

I have emacs running on the box
$ apt-cache policy emacsemacs:
Installed: 22.2+2-5
Candidate: 22.2+2-5
Version table:
23.1+1-4~bpo50+1 0
1 [URL]
*** 22.2+2-5 0
500 [URL]
100 /var/lib/dpkg/status

But I need to upgrade it to the latest version 23 which is NOT on repo.

View 8 Replies View Related

Debian :: No CPU Temperatures In Latest Version Of Gkrellm / Get That?

Aug 28, 2011

This morning gkrellm updated from 2.3.4-1 to 2.3.5-2 and now the CPU temperatures aren't displayed. I've rerun sensors-detect and restarted module-init-tools, but the temperatures still don't display. If I run sensors from a terminal, the CPU core temperatures are displayed correctly. Has anyone else seen this?

View 2 Replies View Related

Debian Multimedia :: How To Install Latest Version Of KDE (5.6.1)

Apr 3, 2016

I'm on Debian stable, I want to know if I could continue on Debian stable but install the latest version of KDE (5.6.1) without moving to testing or unstable. I want to install KDE latest (5.6.1) without having to have all of my other installs to be potentially unstable.

View 3 Replies View Related

Debian Multimedia :: Getting Latest Version Of A Software On Lenny?

Jan 31, 2011

anyone knows how to get the lastest version of a software (Gcompris) on debian lenny using a specific repository via synaptics here are available version by distros release: but i want to stick with lenny for stability Debian Sid

* gcompris_9.3-1_amd64.deb « Debian Main - Educational games for small children
* gcompris_9.3-1_i386.deb « Debian Main - Educational games for small children
Debian Squeeze
* gcompris_9.3-1_amd64.deb « Debian Main - Educational games for small children
* gcompris_9.3-1_i386.deb « Debian Main - Educational games for small children

[Code]...

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved