I work with this travel company that host sites for different agents. They have ALL the sites in one directory and each site has its own search.php file. How can I locate, and change all the search.php files permissions to 644 in one shot? Is this possible maybe with the find command? I read the man page for this but I am not sure how to write out the command.
View 3 Repliesi am trying to write a script that does the following..1. checks if a directory exists2. changes permisssions of the directoryi have written a script but it returns a message to say that the specified directory does not exist (but it does).my question is how to i search the entire file system as directory could potenially be anywhere. would cd or su be of any use here.
View 4 Replies View RelatedHow do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies View RelatedI used locate cmd to search file abc.txt (for example) as I didn't know in which directory it would be present and couldn't find it. But when I did find . -name abc.txt, it traced the file, luckily the file was in the same directory. I am wondering how find was able to search abc.txt and locate not. How these two are behavinb differently? Usually I use locate when I don't know the path to the parent dir.
View 8 Replies View RelatedI have a NTFS drive mounted at /media/bigbrother as my user. I have no trouble reading or writing to files here. I just created a link to /var/www using: ln -s /var/www /media/bigbrother/
The link is there however, I can't even open the folder. How should I go about getting access. So that I'm able to copy files from other systems on the network.
I have a Qnap 219p NAS to which I have connected a USB external harddrive. I can access the external harddrive from my windows box using the network share, but at first i couldn't access the folders. The permissions set in the NAS GUI for the external drive is correct and are identical to the permissions set to the 2 internal drives.
I ssh'ed to the nas and used 'chmod -R 770 /share/external/sds1' - this granted me access to the folders, and some files. I can open all files in the root, but if I go just 2 folders 'deeper', i can't open the files in this folder, and in the folders after that.
In ssh, if i navigate to the folder wher I cannot open the files and use 'ls -l', i can see that the permissions (770) hasn't been applied to these files. How can I get chmod to apply the 770 permission to all files, folders, subfolders and files in subfolders etc., without having to chmod every folder one by one?
i want secondary users can able to change the files permissions of primary group?user MAC is having www as a primary and httpd as secondary group. But he want to change the file permissions (chmod) httpd group files. Is it possible or not? I think its not possible. If it`s possible then let me know how?
View 3 Replies View RelatedI've been using Ubuntu for a few years and I am having issues trying to load .jar files and .exe files in Wine. I keep getting an error message that says my computer doesn't have permission to load these files. I've done some research and found people saying to enable the file as executable in the files properties, to enable executable in the permissions folder, and to allow source code on the Ubuntu Software screen, but whenever I try to check these boxes, they immediately revert to having a line through them instead. I remember when I was running Ubuntu a few years ago I was able to completely disable this restriction in terminal, but I can't remember what I did.
View 5 Replies View RelatedAfter burning files to DVD+RW, the owner is changed to root, and all permissions are read only. I want to periodically open these files, update them, and save to the DVD again, but I no longer have permission and cannot change the permissions since I am no longer the owner. I tried sudo commands, but get responses "Read only file system". I have erased and reformatted the DVD and started over but get the same results.
I have Ubuntu 9.04, and have tried Brasero and Nautilus and get the same problem. Am I using the wrong kind of DVD/CD?
I need to change the config in a folder and can not due to it being owned by root. How do I change the permissions.
Folder = /etc/stunnel/
file = /etc/stunnel/stunnel.conf
I've just read that I can't change the file permissions of files and folders if they are sitting in what was my old Windows D: drive. Is this correct? If so what is the work-around?
I don't want to have to cut and paste that entire D: drive's contents over to a recognised Ubuntu folder. I had in my mind that this D drive would continue to be my data dumping ground, to which I need read/write access to.
My laptop has Ubuntu as a dual boot. Many times I want to copy files from one folder to another. But I run into permissions problems.
For example, I downloaded a program that required me to put a rules file in /etc/udev/rules.d But when I tried to do that, I got an error: "permission denied"
Is there any way to change permissions on folders so that I can freely copy them from one folder to another? That would make life a lot easier.
I have a NFS shared directory between two linux machines, one with RedHat3 and one with CentOS 5.4.On the CentOS 5.4 machine I have InfoBright installed. In that directory, I want to create files with InfoBright and then to select from them with MySQL on the RedHat3 machine.The problem is that InfoBright creates files with 660 permissions and mysql with 666, and I cannot SELECT from any file due to the fact that is not "readable by all"(this is the actual error). I can change the permissions manually, but I need them to be created with 666 permissions, so that I can import them automatically on the other side with a script.Is there any way to change the permissions of the InfoBright created files?
View 3 Replies View RelatedI'm new to Debian. I've read the documentation on this but it is too heavy for a new user to understand. I would like to change the default permissions for newly created files/directories.
I want all newly created files by 'user1' to have the default permissions of:
1. "owner can read and write"
2. "group can read and write"
3. "other can read only"
Permission 1 and 3 are already default. But I would like number 2 to be default as well. (the current default for group is read only).
I just installed Karmic, but I can't copy an old user's home folder (/home/oldusername/) because everything is owned by root.I read but I'm concerned about messing up the system or the files in that old user's folder.So, how do I adjust the permissions of the files in /home/oldusername so that I can use openssh to copy them over my home network to my other computer? I have the ssh part figured out, but the files will not copy to the laptop due to permissions.
View 9 Replies View RelatedSo i pulled some files off my buddy's computer via my wireless home network, i can access them but in the permission tab the owner is "nobody" so i can move the files. How can i change the permissions to enable me to move the files?
View 3 Replies View RelatedSomething has changed all my file permissions to read only and when I try and change them back it wont let me. Is there something I can do i Nautilus to correct it?
It even effects the waste basket-all the stuff in there is now read only and when I delete items I get a file operations window, which comes and then goes like its deleted them, but they re still in the waste basket, doesnt show an error message like it does if I try and move any other file.
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
View 1 Replies View RelatedI am running Mandriva x64 and the nepoumuk file indexing was causing system hangups (in addition to not returning any results) so i disabled it. However kfind is not returning any results either - i feel a bit stupid and I'm sure there's a simple answer to this but How do i locate files under Mandriva linux? Is there a simple KDE application for that or do i need to look at kfind settings? Does file search only work with indexed database?
View 3 Replies View RelatedMy goal is to find all pdf files on a remote machine, so I resort to the useful command find. So I type find .pdf or find .pdf" and I get nothing. I do the same on my machine and I get nothing. I do a regular search from the menu on my machine and I find quite a few pdf files. Would somebody please tell me what am I doing wrong?
View 5 Replies View RelatedI have installed java-6-sun on my Ubuntu 9.10 and now I wanna change the default system JVM search order. Based on the following instruction I should modify my /etc/jvm.
But there is no jvm in my Ubuntu, all I have is jvm.* which "*" refers to ".h" or other suffix. There is no "jvm" alone in my Ubuntu in order to do what the following says.
Setup the default Java version
Ubuntu Linux comes with update-java-alternatives utility to updates all alternatives
belonging to one runtime or development kit for the Java language. To select, Sun's JVM as provided in Ubuntu 7.10, enter:
$ sudo update-java-alternatives -s java-6-sun
You also need to edit a file called /etc/jvm This file defines the default system JVM search order. Each JVM should list their JAVA_HOME compatible directory in this file. The default system JVM is the first one available from top to bottom. Open /etc/jvm
$ sudo vi /etc/jvm
Make sure /usr/lib/jvm/java-6-sun is added to the top of JVM list
/usr/lib/jvm/java-6-sun
Im trying to use the places -> search tool and I get the following error:
Quote: The search results may be invalid. There were errors while performing this
Here is a screenshot since some of the text can't be selected in the error box.
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies View RelatedHow do I set all *.java files in the current directory and all its sub directories to have read permission to all users?
I also want to set all files of at least 1 kilobyte in size in the current directory and all sub directories to have a group of admin.
find a file or content by name recursively similar to the ms-windows function search with Linux? I can do find . | grep test.html suspecting it's not the best.
For instance, running find . | grep terms.htmlgives my expected result while locate terms.html doesn't even though locate gets updated db - it might have to do with that it's an USB stick the file is on?
I would like a command or a bash script that search all files in all sub, modified last 12 hours, in /var/logs and that contains "alfa" or "bravo". The output should be filename of the file or files that contains that.
View 3 Replies View Relatedi have finished installing mysql, howeve some of the files were missing, like mysql.h. i have downloaded a DEV version which has all the files im looking for, however when i add my c++ file to the directory that they are in, it still does not run because it cannot find the mysql.h where does the compiler look for these files, or where should i put them?
View 3 Replies View RelatedI am having a USB disk.I want to change the permissions of folder on it from 700 to 755 (and all subdirectories in it)ls -l showstotal 26Quote:
drwxrwxrwx 2 tkmsr tkmsr 2048 2010-02-12 04:12 HPLAUNCHER
drwx------ 7 tkmsr tkmsr 4096 1970-01-01 05:30 vol1
drwx------ 1 tkmsr tkmsr 20480 2011-01-03 17:43 vol2
[code]...
How can I search files modified in a specific day?
View 2 Replies View Relatedfind out a command to search among all *.dat files in a certain path (including subdirectories) looking for the following text in them:
Code:
--------------------------------------------------------------------------------
Elements with small area
Element Adjusted nodes
--------- --------------
16294 NO
17889 NO
and getting the list of elements with small area printed in a file "ErrorEl.txt". The output should have this form:
"/path/01/A.dat
bad-el#01
bad-el#02
[code]....
I know already how to find out the dat files containg a certain string
Code:
c=/path/
grep -R --include="*.dat" "Elements with small area" $c | cut -d: -f1>> ErrorEl.txt
but I don't know then how to get the element numbers(16294 and 17889 in the example above)