i am trying to write a script that does the following..1. checks if a directory exists2. changes permisssions of the directoryi have written a script but it returns a message to say that the specified directory does not exist (but it does).my question is how to i search the entire file system as directory could potenially be anywhere. would cd or su be of any use here.
View 4 RepliesI work with this travel company that host sites for different agents. They have ALL the sites in one directory and each site has its own search.php file. How can I locate, and change all the search.php files permissions to 644 in one shot? Is this possible maybe with the find command? I read the man page for this but I am not sure how to write out the command.
View 3 Replies View RelatedI just upgraded to fedora core 11. I need to change the permission of the html folder. The owner is currently set to root. Since there is no longer a root user (I just found out) it will not let my user account change the permissions in that directory from. How do you change directory permissions in fedora 11?
View 2 Replies View Relatedi'm having issues with a folder which I cannot write to or seem to do anything else with? i figured i'd delete it and start again but i can't even do that!!
Code:
server@server:~$ sudo chown server /media/server/swap/downloads/incomplete/
chown: changing ownership of `/media/server/swap/downloads/incomplete/': Operation not permitted
[Code]....
when I try to access [URL]... I get an exception:
[code]...
I believe I need to change some directory permissions, but I can't determine exactly what.
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
View 1 Replies View RelatedSo I have created a Bash script with the intent of the program to change the names of the files in a folder's subdirectory.The code recognises the individual subdirectories, then is able to enter into one and list the files individually, but when it tries to change their information it says;' cannot stat ' : ' No such file or directory 'As if it is looking in the directory that contains the Bash script, not its subdirectory.It is essentially saying, I see a file here called FILE but sorry, I can't change FILE because FILE doesn't exist. kweh?Is this something outside the capabilities of Bash? Am I asking too much of it? Can Bash only manipulate files that are in the same folder as the script?
Code:
#!/bin/bash
echo enter directory
[code]....
I have several directories of subtitles for some videos, but all the text for the subtitles in each file is in uppercase, and I would like to convert the files' content to lowercase, all in one go. I found on a website a bash command that would do each file separately:tr '[:upper:]' '[:lower:]' <input.txt> output.txt but of course involves specifying the input name and output name for each file.I have been trying to do it in a script that would work for all files in the current directory, without having to rename them each time, if that's possible. So far I've got the following, which doesn't work:
#!/bin/bash
for file in $@; do
tr '[:upper:]' '[:lower:]'
done
However, my web searches cannot locate a way of specifying "each file in current directory" in conjunction with the "tr" command, but also without having to rename the file once converted to lowercase. Is it possible, or would the tr command have to create a new file for each converted file?
I tried to tag late onto a question similar to mine on stackoverflow (Find Non-UTF8 Filenames on Linux File System) to elicit further replies, with no luck so far, so here goes again... I have the same problem as the OP in the link above and convmv is a great tool to fix one's own filesystem. My question is therefore academic, but I find it unsatisfactory (in fact I can't believe) that 'find' is not able to find non standard ascii characters.
Is there anyone out there that would know what combination of options to use to find filenames that contain non standard characters on what seems to be a unicode FS, in my case the characters seem to be 8bits extended ascii rather than unicode, the files come from a Windows machine (iso-8859-1) and I regularly need to fetch them. I'd love to see how find and/or grep can do the same as convmv.
[Code]....
How do I change folder permissions without changing the permissions of the files within the folder?
View 6 Replies View RelatedThis is on a customized Ubuntu 10.10 LiveCD. I have a directory which the default user "ubuntu" owns, and the permissions on the directory is 777. I'm unable to cd into the directory as ubuntu user. However as root user I'm able to access it. What could be the reason? I'm able to view the directory in nautilus.Note: I originally copied the folder over from an NTFS disk.
View 1 Replies View RelatedI am confused that what should be the permssions of home directory because currenlty my users when they log into their home directory , they can see all the contents of /home directory as well..However if i take read all permissions then my sites are not accessible , what should i do The current permissions are 755
View 4 Replies View RelatedI'm trying to create a script that when given a diretory, it goes traverses through all the subdirectories and process the files in them.However, there is one restriction.directories thatit traverses through must all have a read permission for the others group.How would I go about doing this?
View 1 Replies View RelatedFinally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies View RelatedI have a system where the permissions of many files are messed up. I have another system that has the same files, if I put that hard drive in, without simply overwriting the files, is there a way where I can recursively set the permissions of each file to that of this other directory?
View 1 Replies View RelatedHow do I set all *.java files in the current directory and all its sub directories to have read permission to all users?
I also want to set all files of at least 1 kilobyte in size in the current directory and all sub directories to have a group of admin.
I have a CMS that has a brilliant backup option with one flaw, it can only create a full backup in a directory inside the web root. In this case /var/www/site/backups. This is not practical for security as the resulting tar.gz file contains a full mysql backup as well as other items that the general public shouldn't be downloading.What permissions do I need to set so that the directory /var/www/site/backups cannot be browsed to in a browser but can be read / written by the CMS when a PHP script calls it?
View 4 Replies View RelatedI have created directories in root. I am looking for the chmod command to allow all users read and write permissions to a specific directory. I have done chmod 775 for a file but I need this for a directory. This includes permissions on all files and sub directories.
View 3 Replies View RelatedI am trying to setup 2 individual FTP users. They should both have access to the same directory. They both need to be able to read/write into the directory. But, I want them not to be able to write to each other's files (e.g. delete, remove, rename, etc.).
So let's say the shared directory is: /home/ftp/shared/
UserA needs read/write access to /home/ftp/shared/. UserA should only have write access to his own files. UserB also needs read/write access to /home/ftp/shared/. UserB should only have write access to his own files.
It would be a unix box of sorts, but that is the only restriction. I could use whatever software. I am currently thinking pure-ftpd or vsftp but I am open to all ideas.
I have a directory that needs to be owned by nginx user and I need to access it via other users in order to add/edit/delete files in it. So I created a group called www and added both then chgrp -R on the directory. However I am still getting a "unavailable to access no permissions" sort of error in my SSH/SCP/what ever you want to call Mac's Transmit.
ls -a output
drwxr----- 3 nginx www 4096 Jul 17 23:56 nginx
i just installed RHEL 5, when iam trying to create a directory or file it is not creating ...
View 7 Replies View RelatedI want to move a folder from USB drive to desktop, any directory, let say usr directory. But don't know what the name for usb drive and where to find it, i know i am going to use mv command.
View 5 Replies View RelatedEvery time I update certain packages with rpm/yum, they reset certain permissions on their files / directories which I have intentionally changed for various reasons. Is there a way I can override the permissions that the packagers have specified in the RPMs, and force it to keep the permissions/owner/group that I've set?On a Debian system, I would just use "dpkg-statoverride". I can't find any equivalent for RPM systems (CentOS 4 & 5 in my case).
View 1 Replies View RelatedHow to set the default file permissions on ALL newly created files in linux - but differs in important ways:
I want all files created in (or copied to or moved to) a certain directory to inherit a set of default permissions that is different from the system default.
Rationale: The directory in question is the "intake hopper" for an application. Users in a group place files in the directory, and the app (running under another user id in the same group) takes them and processes them. The problem is that the owner of each file placed in the directory is the user that placed it there, and the permissions are defaulting to "rw-r--r--"; I want to change that to "rw-rw----". The app doing the intake can't do that explicitly, because the user id the app is running under doesn't own the file in question, and the default permissions don't allow the app to chmod on the file! Obviously, the user could do a chmod after putting the file there - but I want to keep the "drop" by the user as simple as possible. (These folks are not linux-literate, they just drag and drop the files from their windows desktop to a (Samba) network share - i.e. they don't even know they are interacting with a linux system.)
umask seems too powerful: I don't want to set default permissions for every file created anywhere by these users - just those created in (or placed in) this directory.
I am using Red Hat Linux 4 .There are some few questions in my mind related to umask. I want to know that is the default file and directory permissions ?
- When we use umask (022) command in terminal. and create a new file then the permissions applied for new file is for that session and when the system will reboot linux will take automatically its default permission from etc/bashrc or /etc/profile ?
- Can we make our own umask or the professional way is to follow 022 only ?
- What is the benefit of umask in Linux?
I'm using ubuntu 9.10. I used the command:
root@aduait-laptop:~# sudo chown -R root:root /media/104B-FF96/Private to set the permissions of Private folder for root but it is giving error:
Code:
root@aduait-laptop:~# sudo chown -R root:root /media/104B-FF96/Private
chown: changing ownership of `/media/104B-FF96/Private/5.jpg': Operation not permitted
chown: changing ownership of `/media/104B-FF96/Private/6.jpg': Operation not permitted
chown: changing ownership of `/media/104B-FF96/Private/7.jpg': Operation not permitted
[Code].....
I am having a USB disk.I want to change the permissions of folder on it from 700 to 755 (and all subdirectories in it)ls -l showstotal 26Quote:
drwxrwxrwx 2 tkmsr tkmsr 2048 2010-02-12 04:12 HPLAUNCHER
drwx------ 7 tkmsr tkmsr 4096 1970-01-01 05:30 vol1
drwx------ 1 tkmsr tkmsr 20480 2011-01-03 17:43 vol2
[code]...
I recently installed 10.04, in the process of installing MythTV... I'm looking for installed files and find bash no longer finds updatedb or locate commands. I did change /etc/hosts and /etc/hostname to change the name of the box. Could this have hosed those commands? I tried them as root... sudo -i, same result...
View 6 Replies View RelatedI'm new to bash scripting and I've searched around the forums and Internet for this but haven't had any luck. I've found similar things but not what I need. What I need to do is write a simple script that uses what the user inputs to locate and display where a file is. I would prefer to use locate instead of find since I know that the person I am writing this for has locate on her machine (my mom, who is just beginning with Linux).I'm writing the script to make things easier for her while she learns In this particular part of the script I would like to be able to have the script prompt to enter the file she is searching for, read the her input and then display for her where the file is. I realize it would in most cases be much simpler just to teach her how to use locate, but she is very impatient and this is just a part of the script I will be writing, but I can't figure out how to do this.
View 6 Replies View RelatedI mean codes on how to write a bash script for locate file. E.g: This utility shows you all files and directories that have a specific substring in the name. Press '?' for help, 'q' for quit or enter your search terms:
Kuala bin
I have searched for two terms for you,
Kuala, which has three hits:
/usr/share/zoneinfo/Asia/Kuala_Lumpur
/usr/share/zoneinfo/posix/Asia/Kuala_Lumpur
/usr/share/zoneinfo/right/Asia/Kuala_Lumpur bin, which has 2312 hits.
Are you sure you want to see all of those? [Y/n] n
Press '?' for help, 'q' for quit or enter your search terms:
Sorry, you didn't enter any search term.
Press '?' for help, 'q' for quit or enter your search terms: q