General :: Smooth Fonts In Gentoo Terminal In Awesome WM?
Apr 20, 2011
I had GNOME DE but recently I've switched to Awesome WM.The only problem I have I can't set smooth fonts in Gnome-terminal.If I start gnome-settings-daemon, all the fonts in terminal become smooth, but is it possible to make it work without gnome-settings-daemon?I would change the terminal if in another smooth fonts were.
My ~/.fonts.conf
<?xml version="1.0"?>
<!DOCTYPE fontconfig SYSTEM "fonts.dtd">
[code]....
View 2 Replies
ADVERTISEMENT
Jun 25, 2009
Compare Fedora's default fonts with Ubuntu's here and here. This is basically a simple "cheat" version for F11 of Breb's original thread, that thread has links to some excellent resources and info if you want to really understand what's going on.
UPDATE: directfb and xcb-util packages must be installed, check by doing: 'yum install directfb xcb-util' 0. In your home directory create a file named .Xresources (don't forget the dot) with this line:
Code:
Xft.lcdfilter: lcddefault
1. Now, as root, create a directory for the libs that we will replace, and backup the current libs:
Code:
su -
mkdir -p ufonts/fedora
cd ufonts
cp -a /usr/lib/lib{cairo,freetype,pixman,Xft}* fedora/
(For x86_64, replace /usr/lib/ by /usr/lib64/ in the above and everywhere below)
2. Extract the required ubuntu libs from these debian packages, libcairo2, libfreetype6, libxft2, libpixman-1-0 or just unpack one of these tarballs 32bit libs, 64bit libs so that you have these libs in ufonts/ (64bit sizes will be larger):
Code:
$ ls -l
...
drwxrwxr-x. 2 user user 4096 2009-06-25 20:37 fedora
[code]...
View 14 Replies
View Related
Feb 7, 2011
I am not able to change to any tty at all. if i press ctr+alt+ f4 nothing happes if i then press f7 and return the screen turns totally black and my gui is only recoverable witrh restarting my displaymanger slim.also when i press ctrl+alt+del in aqwesome (windowmanager) the computer reboots immediatly, what makes me think that, however the terminal isn't properly "seperated" from the windowmanager.After restarting slim and login to awesome i 'am able to change properly to tty's and back to xserver. after reboot i am not able to change to tty's properly again.
View 1 Replies
View Related
Mar 1, 2010
I am using xterm as my default term.Now, I want to use xfce-terminal as my default terminal, but I cannot configure the font in xfce-terminal to use fixed font used with xterm.I tried to do it from the preference menu, but fixed fonts were not shown there.
View 1 Replies
View Related
May 14, 2011
I used Ubuntu for three years and was recently trying Debian and am now giving Fedora a try. When I switched to Linux I was almost computer illiterate. Even now I only know a little about using the terminal. So forgive me for asking such a simple question.I want to install some extra founts that I need, but Fedora is a little different than the systems I am familiar with. I quickly looked through posts in this forum and noticed solutions using long series of terminal commands. With Debian and Ubuntu I added founts by using a nautilus command to get by the permissions (specifically, gksu nautilus). Does Fedora have a similar tool, or must I use the terminal? I want to install quite few founts and do not want to spend a whole day doing it. If terminal is the best solution, I need a little clarification. I saw people using su in their command lines. Does that refer to sudo?
View 13 Replies
View Related
Aug 14, 2010
I was playing around with the settings of my Mint 7 terminal, changing colors, fonts etc.After closing, I tried to open it again by clicking on the icon and it shutsdown as soon as it opens. I can't do anything since the preferences require me to have my terminal open in the first place.
View 6 Replies
View Related
May 30, 2011
Does anyone else know of a terminal emulator that scales the fonts automatically when a window is resized?
My eyesight is horrible but I want to use more terminal applications. I also use AwesomeWM for tiling, so windows resize frequently. Also on the short list are cut/paste by keyboard and good support for launching links.
View 4 Replies
View Related
Oct 9, 2010
I have a HP laserjet M1522nf all in one (scan,print,copy) printer attach to my Dell system running ubuntu 10.04. My problem is that each time I scan a document using Xsane Image Scanner, text appear not smooth. I have attach a sample as reference. Below are the link I use to check my driver. [URL].
Output for HP laserjet M1522nf details are as below:
dell@dell-desktop:~$ dpkg -l hplip
Desired=Unknown/Install/Remove/Purge/Hold
| Status=Not/Inst/Cfg-files/Unpacked/Failed-cfg/Half-inst/trig-aWait/Trig-pend
|/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad)
||/ Name Version Description
un hplip <none> (no description available)
View 3 Replies
View Related
May 31, 2010
want to use my flash drive. How do I get this working?
I logged in as the root user and tried the following:
mkdir usbflash
mount /dev/sdb1 /mnt/usbflash
ls usbflash
and
mkdir /mnt/usb
mount -t vfat /dev/sdb1 /mnt/usb
still can't get it working. What do I do?
View 4 Replies
View Related
Mar 7, 2011
So I used Arch linux for a while and was really impressed and how colorful the commandline output was. Not only from ls, which I was able to emulate by adding "alias ls="ls --color"" to my .bashrc, but also during, say, bootup and other times.Anyway, I was just wondering, what tricks do you guys use to make your command line experience more visually appealing? Fonts, colors, hacks, terminal profiles?
View 5 Replies
View Related
Sep 26, 2010
I'm not very smart in informatic; I just bought a live DVD with gentoo on it, but I can't see any installer. Who did achieve a good installation?
View 3 Replies
View Related
Jun 9, 2010
I'm trying to set up an NFS server on a Gentoo VM. I've installed nfs-utils-1.2.2 and added the following line to the /etc/exports file code...
It complains about not finding the /lib/modules/2.6.24-9-pve/modules.dep file, but the /lib/modules directory doesn't even exist on this machine.
Does anyone know how to get it to work?
View 1 Replies
View Related
Aug 5, 2010
how to backup gentoo updates (not the database)?
Currently im using Sabayon 5.3 (based on gentoo).
I searched the entire web I couldn't fin only broken scripts!
View 5 Replies
View Related
Jan 31, 2010
I'm unable to mount any dvd on my HP 6735s laptop running Gentoo (with combined stable (+) and testing (~) ebuilds). Here's everything that I can come up with: $uname -a Linux aiur 2.6.32.6-aiur-r5 #6 SMP Thu Jan 28 17:02:59 CET 2010 x86_64 AMD Turion(tm)X2 Dual Core Mobile RM-70 AuthenticAMD GNU/Linux
NOTE: -aiur-r5 is my custom kernel name. I am having this problem with all the kernels since 2.6.31. I use the vanilla kernels from www.kernel.org and compile them with some custom settings using menuconfig.
$ ls -l /dev/{cd,dvd,scd,sr}*
lrwxrwxrwx 1 root root 3 Jan 28 17:37 /dev/cdrom -> sr0
lrwxrwxrwx 1 root root 3 Jan 28 17:37 /dev/cdrw -> sr0
lrwxrwxrwx 1 root root 3 Jan 28 17:37 /dev/dvd -> sr0
[Code]...
View 3 Replies
View Related
Feb 14, 2010
I have working apache/php/mysql on my Gentoo server. But I have to enable some extensions in php (json, exif).
I did: USE="dev-lang/php json exif" emerge dev-lang/php
View 1 Replies
View Related
Mar 28, 2011
Ok this is not a question but more or less a small tutorial to help those who have had just as much trouble or more in getting the intel driver + DRI working.
View 2 Replies
View Related
Jul 12, 2010
I was installing "wine" last night and since I knew it was going to take a while I closed the lid of the laptop and turned it upside down on the floor. (I always turn the laptop upside down when not using it otherwise might overheat)When I woke up this morning roughly 8 hours after I went to sleep the machine was turned off.Using the "last -x | grep shutdown | head -1" it stated that it went down at roughly 6 hours from when I went to sleep.The program I was installing got finished installing but I never set up an auto-shutdown program or anything of the sort.If this isn't a problem with linux then its a problem with my bios. If its a problem with my bios I will just have to live with it because my bios is locked. /var/log/messages says this:
Code:
alexslaptop logger: ACPI event unhandled: battery BAT1 00000080 00000001
alexslaptop shutdown[14933]: shutting down for system halt
[code]...
View 5 Replies
View Related
Feb 16, 2010
I am building gentoo through a fully installed Ubuntu system. My swap partition is in use by the Ubuntu system so when I use the mkswap command I get that the partition is already in use. I expected this but I was wondering if postponing the mount of swap until after I have booted into the gentoo system would cause any problems. Am I going to have to edit a bunch of files if I mount my swap later?? Also, I didn't see any manuals mentioning building a gentoo system from a fully installed system, is that going to cause any problems? This is my first gentoo installation, so I'm not really experienced with gentoo. I didn't think that building from a full install would be any different than a live cd other than more resources are already in use. I'm not actually having problems with install. I just want to make sure I wont.
View 4 Replies
View Related
Sep 30, 2010
If I install "Awesome", will I be able to run all the GTK & Qt apps with no problems?
View 1 Replies
View Related
Feb 10, 2010
I have a iMac G5 only with Gentoo installed on it and every time I turn it on, it plays the startup chime.
I already have my headset plugged in but this doesn't mute the sound.
Is there a way to turn it off using the Open Firmware or, if this isn't possible, could a script do this ?
View 2 Replies
View Related
Feb 25, 2010
I installed git and gitosis as described here in this guide Here are the steps I took:
Server: Gentoo
Client: MAC OS X
1) git install emerge dev-util/git
2) gitosis install
cd ~/src
git clone git://eagain.net/gitosis.git
cd gitosis
python setup.py install
[Code]....
SSH asked password for user git. Why ssh should allow me to login as user git? The git user doesn't have a password. The ssh key I created is for the user expert. How this should work?
Do I have to add some params to sshd_config?
View 3 Replies
View Related
Jul 10, 2010
All of the guides I could find online were from 2004 and they no longer work. someone create a step by step guide? I have Apache working, but PHP does not work.
View 1 Replies
View Related
Jul 22, 2011
I downloaded Gentoo and burnt it on CD.I did boot the livecd and the system passed starting stage and it recognised my hardware. After that, there islivecd login prompt, and obviously I tried to use root and no password but it says login incorrect. This is what I did:
Code:
livecd login: root
Password: [hit enter here]
[code]....
View 4 Replies
View Related
Feb 3, 2011
I'm trying to install Gentoo on a virtual machine (VirtualBox installed on my debian squeeze).
My connexion at home is veeery slow, so I wanted to do it at work (don't judge me!), the thing is I' behinf a proxy.
I tried the command
Code:
export http_proxy="proxy:port"
but couldn't ping anything. On the other hand, when i use
Code:
links www.google.com -http-proxy host:port
that works...
So i was able to download the stage3 file and start preparing the system, but I have some troubles when it comes to use the provided tools (the tool to add a mirror can't retrieve the list for example, and I guess I could not emerge anything either)
View 2 Replies
View Related
May 8, 2011
gentoo linux starts but hangs after displaying some lines, no error message, no panic, just stops after about 20 lines
View 2 Replies
View Related
May 23, 2010
I've got a Gentoo box that I'm interested in switching over to an Ubuntu box.
I currently have the partitions laid out using a mixture of RAID (mdadm) and LVM2, as specified in this document [1].
Ideally I'd like to just wipe out the non /home partition, as it's got data I'd like to keep.
Is it possible to reuse the current setup, or do I need to restart? vgdisplay, vgchange -a y, etc don't yield any results from the Ubuntu LiveCD, and I'm wary to run any commands that might wipe my data.
[1] [url]
View 1 Replies
View Related
Jun 27, 2011
In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread:Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.
View 1 Replies
View Related
Jul 30, 2011
I am working on a light version of linux for no particular reason other than to see how small I could make it. I was wondering if INIT was necessary, or if I could perform all of the INIT-related tasks (fsck, unmounting, etc) by hand/bash scripts?
I do not need multi-user functionality (Or much of anything for that matter). I started off with a Gentoo base 2.0.2 Install with kernel 2.6.38.
View 2 Replies
View Related
Aug 17, 2011
When I use emerge --sync my older .ebuild files are removed. How to get newer .ebuild-s, but not lose older ?
View 1 Replies
View Related
Sep 27, 2010
I am using Gentoo Linux and for a while now, the root file system is mounted read-only on booting. For obvious reasons, this is quite annoying as most services do not start up correctly (I do not use a separate file system for /var). After the system is up, I have to log in, remount the root file system read-write, fix /etc/mtab, mount all other file systems in from /etc/fstab and then start up all the missing daemons. I know that there are ways to make a system run properly with a read-only file system, but I would rather restore the old behaviour of a writable root file system.
The strange thing is that after running mount / -o remount,rw, the file system is mounted in writable mode without any errors. I suspected some problem with fsck, but now I have disabled automatic file system checks on the partition (tune2fs -c0 -i0).When I run dmesg, only these lines mention the partition at all, although I am not sure if not something gets lost because /var/log is not writable:
EXT3-fs (sda5): mounted filesystem with writeback data mode</code>
EXT3-fs (sda5): using internal journal
The line in /etc/fstab looks like this:
[code]....
View 2 Replies
View Related