Ubuntu Installation :: Number Of Partitions / Logical Volumes Can Create Using Partman-auto Recipes?
Mar 2, 2011
Is there a limit to the number of partitions/logical volumes you can create using the partman-auto recipes? If not, any thoughts on why my preseed using the values included below results in only a /boot partition and logical volumes root, swap, and user? Is there another way to achieve putting /, /tmp, /var, /usr, /usr_local /opt, etc on their own logical volumes with preseeding?
sda1 - WinRE - Something Windows uses sda2 - Windows7 sda3 - Data
[code]....
I need to remove Ubuntu 10.04 and so I therefore need to remove sda5 and sda6, right? Upon deleting sda5 in Gparted it tells me to "unmount any logical partitions having a number higher than 5".
what the maximum number of logical volumes is for a volume group in LVM ? Is there any known performance hit for creating a large number of small logical volumes vs a small number of large volumes ?
i have a fedora 11 server which can't access the ext4 partitions on lvm logical volumes on a raid array during boot-up. the problem manifested itself after a failed preupgrade to fedora 12; however, i think the attempt at upgrading to fc12 might not have anything to do with the problem, since i last rebooted the server over 250 days ago (sometime soon after the last fedora 11 kernel update). prior to the last reboot, i had successfully rebooted many times (usually after kernel updates) without any problems. i'm pretty sure the fc12 upgrade attempt didn't touch any of the existing files, since it hung on the dependency checking of the fc12 packages. when i try to reboot into my existing fedora 11 installation, though, i get the following screen: (click for full size) a description of the server filesystem (partitions may be different sizes now due to the growing of logical volumes):
Code:
- 250GB system drive 250MB/dev/sdh1/bootext3 lvm partition rest of driveVolGroup_System 10240VolGroup_System-LogVol_root/ext4
[code]....
except he's talking about fake raid and dmraid, whereas my raid is linux software raid using mdadm. this machine is a headless server which acts as my home file, mail, and web server. it also runs mythtv with four hd tuners. i connect remotely to the server using nx or vnc to run applications directly on the server. i also run an xp professional desktop in a qemu virtual machine on the server for times when i need to use windows. so needless to say, it's a major inconvenience to have the machine down.
I have 9.10 and notice that when I look in Places none of my volumes/partitions are mounted - if I click on them I have to enter my user password to authenticate to gain access. My problem is that (with some help) I have set up rsync so it runs when I shut down my PC and backs up my Home folder from a partition on sda to a partition on sdb - this is great but sometimes it works and sometimes it doesn't.
I have done some tests and discovered that if I use my PC and never manually mount my backup sdb partition the rsync does not work (I also have GAdmin-rysnc so I can run manually backup but this also will not run if I do no mount the sdb volume). However, if I do mount the sdb backup partition and close down/restart then the backup works. What I need is my sdb backup partition to be automatically mounted every time I switch on - can this be done? I'm sure I had this working in 9.04 (auto mounting) but 9.10 seems not to like it.
and I'm dumped into recovery mode. However, if I remove these mounts from /etc/fstab via comments, I can wait for the system to boot (which it does very quickly) then mount the mapper devices myself. So what is going on? Has something changed wrt logical volumes, or is this just systemd? I can live with manual mounting, but any advice on resolving the automatic mounting situation would be great.
I have Fedora Core 8 installed. I would like to reinstall it so as to get back commands that have been lost. To preserve my user data that has been stored in logical volumes, what selections should I make in the installation process? Are these selections essentially the same for Fedora Core 10?
After fixing drive partition numbers, I got the following error from cfdisk: Code: FATAL ERROR: Bad logical partition 6: enlarged logical partitions overlap Press any key to exit cfdisk However, I can see all my partitions with fdisk and gparted, I can mount and use all of them.I used the following guide to fix the drive numbers order: Reorder partition drive numbers in linux | LinkedBits Does somebody know whet is cfdisks problem and how can I fix it?
I have done a recent install of Debian squeeze on a laptop. I set up LVM with 3 LV's, one for the root filesystem, one for /home, and another for swap. I then used lvextend to increase the size of the LV's. This additional space is shown if I enter lvdisplay (shortened for clarity):
However, if I use df, it still shows the previous size. /dev/mapper/auriga-root 14G 8.0G 5.2G 61% / /dev/sda1 221M 16M 193M 8% /boot /dev/mapper/auriga-home 147G 421M 139G 1% /home
I have even tried restarting as well. I do not understand why df would still show that /home is 147GB, when I extended it to 169GB using lvextend. Similarly for the root, which was extended by 2GB from 14GB to 16GB.
I have a system where the logical volumes are not being detected on boot and would like some guidance as to how to cure this. The box is a Proliant DL385 G5p with a pair of 146 GB mirrored disks. The mirroring is done in hardware by an HP Smart Array P400 controller. The mirrored disk (/dev/cciss/c0d0) has 4 partitions: boot, root, swap and an LVM physical volume in one volume group with several logical volumes, including /var, /home and /opt.
The OS is a 64-bit RHEL 5.3 basic install with a kernel upgrade to 2.6.18-164.6.1.el5.x86_64 (to cure a problem with bonded NICs) plus quite a few extras for stuff like Oracle, EMC PowerPath and HP's Proliant Support Pack. The basic install is OK and the box can still be rebooted OK after the kernel upgrade. However, after the other stuff goes on it fails to reboot.
The problem is that the boot fails during file system check of the logical volume file systems but the failure is due to these volumes not being found. Specifically the boot goes through the following steps:
Red Hat nash version 5.1.19.6 starting setting clock starting udev loading default keymap (us) setting hostname No devices found <--- suspicious? Setting up Logical Volume Management:
fsck.ext3 checks then fail with messages: No such file or directory while trying to open /dev/<volume group>/<logical volume> There are also messages about not being able to find the superblock but this is clearly due to the device itself not being found. If I boot from a rescue CD all of the logical volumes are present, with correct sizes; dmsetup shows them all to be active and I can access the files within. Fdisk also shows all the partitions to be OK and of the right type. I am therefore very sure that there is nothing wrong with the disk or logical volumes....
I have first installed Windows7 to sda2 (sda1 being the MBR). Then I installed Ubuntu as follows: sda3 /boot, sda5 swap (sda4 being the Extended partition), sda6 /, sda7 /home. So far so good. Windows and Ubuntu worked fine. I also planned to create another partition for data and two more partitions for Arch Linux. And here is the problem.I just assumed that the Extended partitions were created logical but actually they are also primary. So, as things stand, all my 7 partitions are primary and I cannot create any more partitions.I must've erred somewhere during the Ubuntu installation. Is it possible ti change the Extended partitions into logical, without affecting all the stuff within? Any ideas? Otherwise I will have to delete everything after Windows and install Ubuntu again, making sure that I create logical partitions in the Extended part
I have let the debian installer set up with separate partions forrootusrvarhometmpIt ended up with a huge home partition and little place for the others.So I wanted to give some of home's space to the others and didlvreduce on homelvextend on the others.Following some info on the net it tells you toe2fsck -f partition1 followed by aresize2fs partition1But when I try to fsck the reduced home partition I got the following error:The filesystem size (according to the superblock) is 73113600 blocksThe physical size of the device is 20447332 blocksEither the superblock or the partition table is likely to be corrupt!Abort? yesIs there any way to save this?
How would I go about encrypting my lvm2 logical volumes on Debian Squeeze? Is it possible without backing everything up to a different drive and restoring afterwards?
I've read the first 40% of the RHEL 5 Logical Volume Manager Administrator's Guide, but still have one outstanding, burning question.
During the installation of Centos 5.6, I set up LVM physical volumes, volume groups and logical volumes. I can list these using pvdisplay, vgdisplay and lvdisplay commands.
How would I list what filesystems I have that are using my logical volumes?
I would like to ask if is it possible to boot Slackware with the installation CD when in a pinch with a system on logical volumes? For the usual fdisk partitions the procedure is known:
Code: boot: root=/dev/sda1 noinitrd ro or something like that. This way, the system boots with mounted basic partitions. My question is whether there is an option to achieve the same if the system is installed on logical volumes? I need to do this on a machine with dual booting Windows + Linux. The Windows needs to be reinstalled, but as is well known, the boot sector will then be overwritten. So after the Windows reinstallation I will need to boot Slackware with the installation CD and run lilo.
Does everybody do major upgrades in place on production servers?Am I over-engineering by creating a new logical volume, syncing my working root volume to it and upgrading the new volume to test services? Then, after a week or 2 or 4, removing the old LV...
I inherited a 3ware 9550SX running a version of gentoo with a2.6.28.something kernel. I started over with CentOS 5.6 x86_64.tw_cli informs me that the 9-disk RAID 5 is healthy.The previous admin used lvm (?) to carve up the RAID into a zilliontiny pieces and one big piece. My main interest is the big piece.Some of the small pieces refused to mount until I installed theCentOS plus kernel (they are reiserfs).The remainder seem to be ext3; however, they are not mounted at boot("refusing activation"). lvs tells me they are not active. If I try tomake one active, for example:root> lvchange -ay vg01/usrI get:Refusing activation of partial LV usr. Use --partial to override.If I use --partial, I get:Partial mode. Incomplete logical volumes will be processed.and then I can then mount the partition, but not everything seems tobe there.
Some of the directory entries look like this:?--------- ? ? ? ? ? logfilesIs it possible that the versions of the kernel and lvm that wereon the gentoo system are causing grief for an older kernel (andpossibly older lvm) on CentOS 5.6 and that I might have greaterfortunes with CentOS 6.x ?Or am I missing something fundamental? This is my first experiencewith lvm, so it's more than a little probable.
I've installed Arch Linux onto my Western Digital SATA drive.I love it, best ever, however, I need the fglrx proprietry driver for better 3-d performace, and decided to create a new partition. I decided to install Linux Mint.Sadly, in all my noobishness, I forgot about the 4 primary partition limit (oops!) and as I have /, /home, swap, and /boot partitions (all primary) already installed, I have run into a bit of a problem.I resized my /home partition (almost 500GB) to about 225, and was then told I have over 200GB unusable space. Is it possible for me to change at least 1 of my primary partitions to logical partitions AND keep all the data intact (AND edit the arch configuration so that it'll still work) so I can install a second linux? I sincerely doubt it
So today I needed to switch from openSolaris to a viable OS on my workstation and decided to install openSUSE after having good experiences with it on my personal laptop. I ran into some problems partitioning one of the two hard disks installed on the system. I was limited on the amount of time I could spend at the office doing the install so I decided to use LVM on the one hard disk that seemed to work okay.
I picked LVM because although I don't know much at all about LVM, I at least know enough that it would allow me to expand the root and home partitions once I get the 2nd hard drive working correctly. So now that I've gotten the 2nd disk working okay, I've created two physical volumes on the 2nd drive, one to expand the root partition and one to expand the home partition. So, my question is, can I expand the root an home partitions while they are mounted or should I boot into a live CD environment before I expand the partitions? If I could expand them without booting into a different environment, that would be so great as I don't want to have to drive out to the office again before Monday. BTW, I am a new openSUSE user and an ex Ubuntu user. I loved the Ubuntu forums but had to switch because I do not agree with the direction that Ubuntu is taking.
just about to install Fedora 10 on my MSI WIND laptop and read abit about file system on Linux and come across alot of recommendations on how many logical mounts or partition to create..so far i have created /boot of 100MB.i'm unsure of what sizes i will give to my [root] / and /home and /swap
i am thinking of assigning 1GB to /swap which leaves me with 40GB left for / and /home.i'm going to install alot of softwares and probably try out wine as well.i want a separate /home directory incase i change distro then i'll keep it... where does the programs go to under?
I have a dual boot on my laptop between XP and Ubuntu with a storage partition.that gives me total of 4 primary partition
-Windows -Storage -Ubuntu -Swap
I now want to add a OSX to my laptop in tripple booth. I did shrink the windows partition and now I realized that all my partitions are primary and cannot create a new one with the space I shrink from windows.Is it possible to merge ubuntu and its swap into extended/logical partitions so I can create a new primary for Mac OS X?
I'm an old user of Ubuntu/Linux but have stumbled across my first major problem in years. I just can't get my head around it.I own a Asus Eee Pc 1005HA it has roughly 160gb and is currently running WinXP. I'm trying to install the latest Netbook remix 10.04 onto the machine as a dual boot option.I've loaded the iso onto a usb drive and everything works perfectly. The problem is during installation. I can't work out how to set up the partitions for a dual boot option. Below is the current configuration on the system.
/DEV/SDA /DEV/SDA1/NTFS 77375MB Windows XP Partition /DEV/SDA2/NTFS 77366MB Free space
[code]....
I would like to use the free space as my Ubuntu installation. Can anyone advise me on the best way to install this without affecting my WinXP system.
I'm using fedora core 9 and I am a linux beginner. In my computer, I can see the icons representing windows partitions but cannot be opened. I right click on it and then opt for "mount the volume" . But there is no use. What can I do?
