I had my server going pretty good. Two sites being hosted. Wilmingtoncoc and Mikealrhughes. Last night we had Thunderstorms and Tornadoes come through. While I was out Tornado chasing. We lost power here for an instant and back on. When I came in the server was off. So I booted it back up. The mikealrhughes site is still working good. The Wilmingtoncoc site is giving me a Database read error, it is a WordPress site. Also I can't log into the Server using SSH. Where do I start to repair the problem? Do I reinstall SSH if so what is the command I use? Then how do I solve the WordPRess Database problem? Also when I try and issue a command from the Server with sudo in front of it I get an error message that says - sudo: must be setuid root - whatever that means. I couldn't find that in any of the books I have.
I'm running RHEL 5. When using the GUI System>Administration>Users and Groups, I get the error: The user database cannot be read. This problem is most likely caused by a mismatch between /etc/passwd and /etc/shadow or /etc/group and /etc/gshadow. The program will exit now.
Some research showed that I need to use vipw and vigr respectively to find an inconsistency between these two sets, which I did - to make it easy I copied each from [vipw | vigr] to an excel file and did =exact(%1, %2). There are no inconsistencies.
I built the indexes, but when I search I get this: Top-Level Documentation Application Manuals
openSUSE Documentation (en) Htdig error: Unable to read word database file '/home/philip/.kde4/share/apps/khelpcenter/index//opensuse-manuals_en.words.db'
[code]...
the UNIX manual pages work, the Application Manuals show nothing, and the openSUSE Documentation shows the same error. This is the same no matter what I search for.
Is it possible to setup apache to normally block an IP from accessing a site until that IP is in a database/file?More or less, I need a login system that another script can add/remove the IPs and the site can be accessed by only those IPs.
I am trying to setup ipv6 lan network.using Ubuntu 10.04 as DNS server.Able to resolve domain names from dns server itself but can't resolve from client machine (backtrack5). I have tried to flush iptables but still no effect; dig gives servfail error.I can ping both machines from one another.
I installed SLES 11 SP1 jeOS on my system. It is booting up properly. But when I tried to boot it up with "TrustedGrub", it comes up up to login level. When I given the login name and password, it shows an error "Error in service module".Then i couldn't login.
I want to keet some data on windows dir. I have tried the below command and giving the below error. [root@xyz0044 ~]# mount -t cifs //10.48.64.52/jata -o username=domainv.kumar3,password=xxxx /mnt/backup mount: block device //10.48.64.52/jata is write-protected, mounting read-only mount: cannot mount block device //10.48.64.52/jata read-only
I ahve configured MRTG to generate bandwidth utilization graphs of Network devices.
I ahve configured 30 Network device ( Cisco Switches and Routers), For most of the devices MRTG is working fine but for some devices it is not able to generate log file and giving the following error:
I have downloaded Ubuntu from a CD and burned it using Infrarecorder. When I tried to boot my netbook(Samsung N 140 with Win XP OS preloaded), it gives error message .i have tried the process several times and spent lot of time but to no avail.
This situation after a mains power failure took server down.Log oonto server with root, go to Admin > users and get this message:" The user database cannot be read. This problem is most likely caused by mismatch between /etx/password and /etc/shadow or /etc/group and /etc/gshadow. The program will exit now."
This may come across as a bit of an isolated and complex problem, but I haven't been able to get my iPod Nano 5th Generation to have any sort of compatibility with any iPod management programs (except with using Nautilus I guess). This includes gtkpod, Banshee and Rhythmbox.With Rythmbox, my iPod shows up in the pane, but I cannot interact in anyway except ejecting it. There aren't any msgbox errors.Banshee cannot read the iTunes database or something and insists that I rebuild the database on the ipod so I can use it with banshee. I did and gained full access to Banshee's iPod management with all the features it carries. I moved my music library on to the ipod but the thing states that I have zero songs whilst banshee states otherwise.
iTunes on my Windows PC will show that I have x number of GB of "other" information after using Banshee to move music. It seems that it is transferring data sufficiently but is not recognising it as "audio" gtkpod wont let me manage the iPod before or after Banshee's tampering.
We have a Dell PE6600 with a QLA2460 FC HBA in it. Server is running RedHat AS 4.7 (kernel 2.6.9-78), FC driver used is the file qlafc-linux-8.02.23-3-install.tar downloaded from the QLogic website. On this server is an Oracle database running (11.1.0.6). Files for the Oracle database are located in mountpoint /u02. The SAN is an iQStor 2880. Since several weeks we suddenly have problems with the Oracle database after a reboot of the server. After a reboot the mountpoint /u02 is readable and writable (tested by creating, opening and removing files).
However, when we try to start the database we get an error which give you the idea that the database is corrupt. The Oracle error is quite a general error. After doing a lot of testing we found out that if we unmount /u02 and mount it again (using mount -a so it reads the /etc/fstab), the database can be started after all. So the database is not corrupt but for some weird reason we have to remount /u02 first before the Oracle database can use it. We don't know if it's a linux issue, fibre issue, san issue or an oracle issue.
error: failed to init transaction(unable to lock database)if you're sure a package manager is not already running, you can remove /var/lib/pacman/db.lck and there was the same error when i try to install a package. I recently did a full system update could that be the problem?
I would like to make a script which reads a POP3 mailbox on another server and saves the items in the mailbox to a MySQL database. Is this possible? I have to make this script to create monitoringen scripts which has to use the messages in the mailbox.
I'm using postfix to send some mail from my cloud server via a web page on my website that uses PHPmailer to do SMTP authentication. My cloud server has a dedicated IP for all inbound and outbound data. The problem I am having is that it sends roughly 75 - 100 messages successfully before it returns the following error for the remaining few hundred recipients in my list:
SMTP Error: The following recipients failed: example@example.com Mailer Error [URL] SMTP Error: The following recipients failed: example@example.com SMTP server error: 5.5.0 Sender already specified
Unless your distro has taken care of it Centos 5.5, you'll need to create a user with a password and read/write privileges for program database. You can do this using the MySQL command line client if you are familiar with it. Well I am not familiar with it, so I wam wondering how to do it. As well when I run
mysql - p program </usr/share/program/mysql.sql>
It asks for a password. how do i find out this password.
am using zabbix open source solution for systems monitoring. I am facing a problem and discussed it on zabbix forum. my post was as "My zabbix server is behaving abnormally, approximately daily from 9 to 12, the server stop accumulating logs. I observed that the server report is RUNNING but it did not accumulate log values and also the machine have no extra load. Its shown in the graph image attached.t the following reply,"database performance?are you monitoring database IO and available database threads? "So any one have any idea that how can I do this as I am using MySQL as backend database on RHEL 3.
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
I have changed nothing about the configuration of my checkgmail except for the icons. And yet, whenever I click on the subject of an email, it gives me a 404 error. When I use the links (delete, spam, archive, mark read) it does what it is supposed to do, but it does not allow me to view the content of a message. Does anybody have any idea of what could be causing this strange behavior? Gnome. 10.04. x64.
I have been looking for a while now, but I keep getting 403's for maps but not for files... So if you go to http://gmod.ws/ you get the error but if you go to http://gmod.ws/index.php you don't.I don't see where the problem is.We're running a CentOS 5.5 box.
I upgraded a system from 10.3 to 11.4 and I get the following error when trying to run mysql:
Will update MySQL now, if you encounter any problems, please read following file: /usr/share/doc/packages/mysql-community-server/README.SuSE Log files inconsistency, please merge following files manually: /var/lib/mysql/mysqld.log /var/log/mysqld.log
How can I correct this? Mysql will not start so I can not run any of the utilities.
I am trying to learn it, understand it, and maybe even become proficient with it (one day... ). After trying a few different flavors, I settled on Fedora XFCE, and installed v14 (i686) in a dual boot setting with Windows. I am running it on an HP laptop.I have had an issue ever since I installed a rather large list of updates a few days ago. One of which was a Linux kernel update to 2.6.35.6-45.fc14.i686 (not really sure if that is significant, but I noticed the issue after selecting this kernel version in the boot menu). Now, anytime I try to add software, or run the update utility I get the error message:Quote:You have failed to provide correct authentication. Please check any passwords or account settings.
More Details:Failed to obtain authentication.There was no dialog to provide my password. I do understand there are alternatives to installing and updating software using yum, and I have been doing that a bit, however I would really like to understand why I am receiving this error. I have seen a few related posts as well as a some similar issues in a bug report, and testing session:bugzilla.redhat.com - 638344General a similar gpk-application issuecannot use Add/Remove software through VNCMy questions are:Is this a bug with one of the updates I downloaded?Is there a way to revert the changes from that update, or do I need to reinstall Fedora?Is this an issue with the User account I created? Is there a general set of options I should enable for myself as the primary user?
I have a tar file but when I try to install it is giving error. Here's what I did. Code: tar xjvf live.tar.bz2 cd live ./configure bash: ./configure: No such file or directory I have build-essential installed
I have a Ubuntu 10.04 desktop VM that is running torrent software, and it is saving the files to a samba share (which is actually the host it is running on). I have also tested from another Ubuntu box on the network and it experiences the same problem.
The problem I am having is that any torrent client on a Ubuntu machine or VM can't save to the samba share, but a WinXP torrent client can download the same torrent and save to the share with no problem.
I created a public share, and the problem seems to be that I cannot edit files after I create them. It seems that samba is ignoring the create mask and creating files as rw-r--r-- instead of rw-rw-rw-
I even tried adding the "unix extensions = yes" option and that didn't seem to work either.
Code: [global] # map any unknown username to nobody so login succeeds, don't forget to run: # smbpasswd -an nobody # so that it will work!
I have prepared a script which will login to each server and search for a keyword.I want output on same machine from where m running script.When i try to run command on any machine.. It works well.
