I want to keet some data on windows dir. I have tried the below command and giving the below error.
[root@xyz0044 ~]# mount -t cifs //10.48.64.52/jata -o username=domainv.kumar3,password=xxxx /mnt/backup
mount: block device //10.48.64.52/jata is write-protected, mounting read-only
mount: cannot mount block device //10.48.64.52/jata read-only
I virtualized a PC with VMware vCenter Converter. But when I boot my virtual PC, I have an error.I found this link but I can't mount /dev, /sys and /proc. I have this error message : mount: /dev is not a block device.
View 2 Replies View RelatedI have one hard disk (call her HDA) that contains nothing but a single ext4 partition containing a backup of all my important data. Last night I did a clean install of Ubuntu 10.10 on my primary hard disk (call her HDB) and from there proceeded to upgrade directly to Ubuntu 11.04 upgrade. In 10.10, I was able to read HDA just fine. However after the upgrade, I can no longer mount this drive. When mounting from file browser:
Code:
Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sda,missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so The end of dmesg said the following:
Code:
dmesg | tail
[ 82.130904] EXT4-fs (sda): bad geometry: block count 122096646 exceeds size of device (122096381 blocks)
my hard disk has a block count greater than the size of my device. I've done my background searching on this and tried a command line utility I've never heard of before:
Code:
# sudo e2fsck /dev/sda
e2fsck 1.41.14 (22-Dec-2010)
The filesystem size (according to the superblock) is 122096646 blocks
The physical size of the device is 122096381 blocks
[code]....
this is as far as I've gotten. This drive holds over a decade's worth of work for me and is extremely valuable. I really didn't think that the Ubuntu upgrade process would mess with this drive, seeing as the Ubuntu install was contained on an entirely different drive. What is it that I need to do to restore my drive to working status?
I decided to take an old Gateway that I bought off a guy cheaply and turn it into a file and web server.I purchased copies of Debian 5.0.4 i386 disks (31 in all) on the advice of a friend, the disks weren't expensive, but now that Ive installed all the disks, I'm having a variety of errors
[443.110940 end request: I/O error, dev hde, sector 76021855
[443.111074] EXT3-fs error (device hde1): ext3_get_inode_loc: unable to read inode block - inode=2375715, block=9502724
INIT: cannot execute "/sbin/getty"
[Code]..
I used dual booting with Windows Xp and Ubuntu 10.04. Because errors, I reinstall Windows and then I could not enter GRUB, and Ubuntu partition disappear. I tried to reinstall ubuntu using live CD but I could not detect last ubuntu partitions. After I installed fresh Ubuntu on new partition, I got error message like this:
Unable to mount floppy0 Mount: block device /dev/fd0 is write protected, mounting read-only Mount: could not determine the file system type, and none was specified
I am running RHEL5.5 its a fresh install and we are testing Xen Virtualization. We are wanting to use our iSCSI SAN for the VMs. I have created the initiator iqn, and discovered the target address. We are connected to the target, but there is no new block device in /dev.
[root@xxxxxxxx etc]# netstat -a | grep iscsi
tcp 0 0 *:iscsi-target *:* LISTEN
tcp 0 0 xxxxx-netapp.okc-:44840 xxxxxx-iscs:iscsi-target ESTABLISHED
tcp 0 0 *:iscsi-target *:* LISTEN
[Code].....
I get assigned an IP from the university's server. Every now and then, a student will plug in his router to the network trying to get wifi in his/her room.
And by doing so will start assigning IPs on the network, while rendering useless the university dhcp server, which has to cope with a higher number of pc's.
How can I specify to dhclient (or the linux system in general) NOT TO obtain IP addresses given by a specific mac address ?
I have a server that has a Fibre Channel mount that is having issues. When I can in this morning I found that it had switched to read only. Now looking through /var/log/messages I see that there are errors reported on the disk. I know that i will need to run fsck on it, but I do see lines about the device mapper failing for mpath0 first, which is the device which is mounted. I am wondering if someone can take a look and see if this is just a drive issue, or an issue with the fibre channel connection.
uname -a
Linux server 2.6.27.25-78.2.56.fc9.x86_64 #1 SMP Thu Jun 18 12:24:37 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
Mar 28 00:12:36 server kernel: sd 4:0:0:0: [sdb] Result: hostbyte=DID_BUS_BUSY driverbyte=DRIVER_OK,SUGGEST_OK
Mar 28 00:12:36 server kernel: end_request: I/O error, dev sdb, sector 314570452
Mar 28 00:12:36 server kernel: device-mapper: multipath: Failing path 8:16.
Mar 28 00:12:36 server multipathd: 8:16: mark as failed
[Code].....
I had my server going pretty good. Two sites being hosted. Wilmingtoncoc and Mikealrhughes. Last night we had Thunderstorms and Tornadoes come through. While I was out Tornado chasing. We lost power here for an instant and back on. When I came in the server was off. So I booted it back up. The mikealrhughes site is still working good. The Wilmingtoncoc site is giving me a Database read error, it is a WordPress site. Also I can't log into the Server using SSH. Where do I start to repair the problem? Do I reinstall SSH if so what is the command I use? Then how do I solve the WordPRess Database problem? Also when I try and issue a command from the Server with sudo in front of it I get an error message that says - sudo: must be setuid root - whatever that means. I couldn't find that in any of the books I have.
View 6 Replies View RelatedIn a nutshell, our RAID 1 array was rendered broken and we were advised that core lib files were missing and the OS needed to be reloaded... a quote from our server host:"The OS is not healthy.This server will need a reinstall.
Libs are missing." This was after having replaced what we though was a faulty /dev/sdb. So they reloaded the OS (Debian 5.0.2 x86_64) on 2 FRESH drives, and installed the old /dev/sda as /dev/sdc once the reload was completed. Here's the output of /etc/fstab on the fresh install so we know what we're working with:
Code:
debian:/BAK# cat /etc/fstab
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
The one problem I see myself running into is /dev/md1 and /dev/md2 are currently in use by the new system, so I cannot mount it there. I should also note, reloading the OS is a viable option if needed as we haven't started configuring the server yet. So if we need to reinstall the OS and assign the NEW RAID arrays to something other than /dev/md1 and /dev/md2 then we can do that.
I have a Windows 2003 server with fiber attached volumes (NTFS) that I would like to mount readonly on a linux system to back it up to tape. The fiber device will allow me to present the volume R/W to one host and R/O to another, however, the R/O system doesn't see any of the changes made by the R/W server. In other words, how can I make a readonly volume refresh, scan for changes, or update without un/re-mounting it?
Is the "mount -o --bind" option what I want? From the MAN is doesn't seem right... the option "sync" seems slightly more promising but I think I'm just grasping at straws here. The best I have come up with is a cron job to unmount then mount the volume periodically.
I'm having a consistent problem with instances on Amazon EC2, which a lot of searching including here has resulted in no solution.During boot I see the following message on the console (or "System Log" in the Amazon console):Code:Mounting local filesystems: mount: /dev/sdg already mounted or /apps busy(I'll append a extract from the full log below).Once I log into the instance, I can access the filesystem so it's mounted somehow but I can't figure out what's going on:
Code:
# df -k /apps
Filesystem 1K-blocks Used Available Use% Mounted on
[code]....
why I'd be receiving this error. I have created a partition and filesystem and put the label in fstab. Everytime I reboot the server it is unable to mount the filesystem. However I am able to mount it manually.
View 5 Replies View RelatedI seem to have another issue with my raid system
mount -a
mount: special device UUID=fb518c74:2b6bd0f4:66db5ce6:7e004239 does not exist
but when i do mdadm -vv --detail /dev/md5 ... this is what i get --->
/dev/md5:
Version : 1.1
Creation Time : Fri Feb 25 14:07:36 2011
Raid Level : raid1
[code]....
I have a list of Logical Block Addresses that I need to read from the disk. Is there any way to do this from user space?
View 1 Replies View Related[code]...
server2 kernel: EXT2-fs error (device sdc1): ext2_get_inode: unable to read inode block - inode=44998281, block=89981174
[code]...
Is there an easy example of a block device driver I could follow as a guide to write my own module?
View 5 Replies View Relatedwhat now trying to mount partition get this error this is the partition ubuntu 9.10 is installed on and upon reboot error no device with a long string. mount: can't find /dev/sda6/mnt in /etc/fstab or /etc/mtab
so now that I believe I've successfully mounted the partition how do I direct the bootloader to this partition /dev/sda6 on /media/11076e45-e27d-470b-bb6d-6894f7809a0c type ext4 (rw,nosuid,nodev,uhelper=devkit)
My F12 installation, which was installed on an HP tx2500z laptop and has been operating relatively well since January, now fails to boot after a frozen screen precipitated a forced shutdown. On reboot, I was dropped into a shell with the error message "Error reading block 1546 (Attempt to read block from file system resulted in a short read) while getting next inode from scan." recommending to run fsck manually. During the fsck run, after a substantial number of Pass 1 inode count corrections, the "Error reading block" message reappeared, with the question "Ignore error<y>" to which I answered "y".
fsck responded with "Force rewrite<y>". Since I did not know what would be written here, I said "no". I then forced shutdown, rebooted into Windows, and searched for further guidance. One suggestion was to run fsck -y on the affected partition. My laptop drive has four partitions, the first two being allocated to Windows and an HP supplied repair partition. sda3 is a tiny boot partition (100 MB), and sda4/5 is the LVM remainder.
fsck -y /dev/sda3 told me the boot partition was fine.
fsck -y /dev/sda4 stopped immediately and asked "Could this be a zero-length file partition?". Given the ext3 structure, I suppose the correct answer is yes.
fsck -y /dev/sda5 told me fsck.LVM2_Member: not found.
Following this, I then attempted again to reboot, and ran fsck without options. Once again, during Pass 1, Block 1546 exhibited the short read error, again asking about a rewrite - which I once again answered no. Pass 1 completed with another substantial number of inode count corrections, and Pass 2 started - immediately generating the message:
'passwd' in /etc/pam.d (65556) has deleted/unused node 7831. Clear<y>
After some hesitancy, I said "yes", and of course a second similar message appeared. I was brave enough to answer "yes" six more times, with the first two referring to /etc/pam.d inodes, and the next four referring to /etc/security/console.apps inodes. The eighth message, also similar, referred to inodes elsewhere - but by now I did not dare to continue and forced shutdown. Is this repairable, and if so, how?
I am using Wind River Linux- 2.6.27.18-WR3.0bg_standard. The problem is whenever I execute "reboot, ls, cd" and many other commands the OS prompts me an error-
"end request: i/o error, dev sda, sector "(different sector each time)" and
EXT3-fs error (device sda1):ext3_get_inode_loc:unable to read inode block- inode-4088001, block-4097027
I also executed "dmesg", it also showed similar errors. Has the disk gone bad or the kernel is corrupted?
algorithm:breada
input: file system block number for immediate read
file system block number for asynchronous read
output:buffer containing data for immediate read {
if(first block not in cache) {
get buffer for first block
if(buffer data not valid)
initiate disk read }
if(second block not in cache) {
get buffer for second block)
if(buffer data valid) //line 1
release buffer else
initiate disk read //line 2 }
if(first block was originally in cache) //line 3 {
read first block
return buffer }
sleep (event first buffer contains valid data)
return buffer }
Here is an algorithm for block read algorithm. I have problem in
line 1: If buffer data is valid why is it releasing the buffer?
line 2: If buffer data valid why is it initiating disk read. It should have read directly from buffer?
line 3: It should be the first condition as if it is there in cache then it should return it without delay?
I have an external hard disk drive and I would like it to be recognized with the same name (e.g. /dev/sbd) after each boot.
Is there any way to make that?
I want to test LVM+Raid. When I was testing ZFS on Solaris, I was able to create regular files, and use those as disks for testing.I tried creating a regular file full of zeros w/ dd, then partitioning that. fdisk seemed to be able to create a partition on the regular file, but mkfs and parted couldn't work with it. Is there any way to create fake block devices for testing?
View 4 Replies View RelatedWhen I try to mount the /dev/sdd1 device then it give errormount -t ext3 /dev/sdd1 /4hdmount:/dev/sdd1 is not a valid block device
View 9 Replies View RelatedI created LVM and formatted it. But at the time of mounting it getting this error message ".....not a block device".
View 3 Replies View RelatedHow do you go about getting the raw size of a block device under Linux from within a C program? And I mean the raw size of the block device itself, not a file system that may or may not be installed on it. And I'd like to be able to get the raw size of any block device, from hard drives (e.g., /dev/sda) to LVM partitions (/dev/mapper/vg0-home) to loop devices to anything else that is a Linux block device.
View 3 Replies View RelatedIs it possible somehow to block some bluetooth device with specif address (mac) ?
(like iptables block by mac)?
I'm setting up a machine that's going to be used to test randomly connected tape drives one at a time, and as such, I'm writing the test routine using mt in a bash script, for user-friendliness. The problem is the block device name changes on occasion as tape drives are swapped out and busses are rescanned, so I can't "hard code" a block name into the script.
I know programs like lsscsi and hwinfo will give you block device names as part of their output, but I can't seem to grep anything in such a way as to have the final output be just the block name (ie /dev/st2, or optimally 'st2'), so that I can just have the script read said output, and drop it into the necessary variable.
I built a Raid5 volume with 3 SATA II hard disk drives. Further I have a system disk conected through IDE. During the first setup the IDE disk becomes sda, the SATA II disk sd[bcd] respectively. Now, sometimes the device names change after reboot - why ever... E.g. one of the raid5 disk become sda and so I got an error message during the boot procedure regarding the raid set. Curious, when the system is up and I stop and restart the Raid5 volume it comes up and runs fine. Because I'm currently at work I can't post any more detailed config files at the moment.
View 2 Replies View RelatedI am trying to debug the issue of a desktop that has for the last two weeks started having kernel panics at boot time. This machine has been running flawlessly for the last 8 years, and has had three OS upgrades. I am using memtest to try to understand the issue. The following is part of the memtest output: Reading all physical volumes Buffer I/O error device hdc logical block 0 Buffer I/O error device hdc logical block 15
Illegal node for this track or incompatible media (asc=0x64 ascq=0x00) The failed "Read 10" packet command was /dev/hdc: read failed after 0 of 4096 at 0 Input/output error and similar set of mesaages After this udev checks correctly, and hardware, storage and audio are initialized However sometime in the middle of the boot process, a kernel panic occurs with message Kernel panic -- not symcing : Fatal exception in interrupt
