Error: Cannot connect to the database because: INSERT command denied to user 'webuser'@'localhost' for table 'visitor'
[Code]...
I think I screwed up my Administrative username in mysql.
mysql -u root mysql
ERROR 1044 (42000): Access denied for user ''@'localhost' to database 'mysql'
Can I just copy all the files in /var/lib/mysql >>reinstall MySQL >> copy all the old folders into the new /var/lib/mysql ( while MySql is off)
Firefox seems to suddenly dislike one of the groups i belong too, whenever i try to access it I get the following message,
Database Error: INSERT command denied to user 'usingle_210259_1'@'linweb14.atlas.pipex.net' for table 'smf_log_online'
File: /websites/LinuxPackage02/si/ng/le/singlewithkids.co.uk/public_html/forum/Sources/Subs.php
Line: 2602
Is this a server error, or is it my system? I have tried using a different theme but I still get the same error.I'm using the gnome classic theme ATM.
my database (PostgreSQL) has ever funtioned OK, but today don't let me insert a new row in a table and the record itsn't duplicated. I did a vacuum full and reindex the database and the problem continue. I don't know what the fuck is happening
View 2 Replies View RelatedI can log in Mysql database successfully using
Code:
mysql -u myusername -p mypassword
Now, I need to execute GRANT PRIVILEGES. But, when I try to execute
Code:
mysqladmin -u myusername password mypassword
the below error occured
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'myusername'@'localhost' (using password: NO)'
for some reason root lost grant privileges and I can't get it back. The user got grant_priv = 'Y' in the usertable. I've tried to reset all the priviliges to the user by killing MySQL process and started up again without grant options with no luck. I've also tried lots of other things but can't seem to get it work. Here is what I get: Quote:
[root@xxxxxxxxx mysqldba]# mysql -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or g.
Your MySQL connection id is 2
Server version: 5.0.77 Source distribution
[Code]...
I set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ?
b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user)
c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
ubuntu terminal. I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I followed this tutorial for setting up my server. Whatever I type into mysql or mysqladmin all I get back is Quote:ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
View 1 Replies View RelatedI am pulling my hair out once again after trying for over 15 months off and on to get a tv tuner working under linux. I have just received my new tuner card which I thought was supposed to be easy to run, a HVR-950Q, no luck yet. But first I am trying to use something called mysql (new to me), for mythtv and [I] keep getting
# mysqladmin -u root password ma
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)
I have installed mysql-server, but i have no access. I have set the password during installation process.
Used command:
mysql -u root -p
error message:
[code]....
I am writing a simple application that will run as user foo (i.e. Ubuntu user foo).However, the application will connect to my database as (database user foobar). IIRC, database users have nothing to do with Linux system users - but I just need to clarify that.So can an app launched to run as user 'foo', connect to a database as user 'foobar'?
View 1 Replies View RelatedRecently I got a very rare database issue, it says: Error: Couldn't read status information for table clients_copy () mysqldump: Couldn't execute 'show create table `clients_copy`': Table 'adm_retail.clients_copy' doesn't exist (1146) Error: Couldn't read status information for table dt_mx_emp ()
[Code]...
I m trying to store the output of vmstat 1 10 into a database.I have done the necessary homework to connect bash to interact with the database.Program logic.1)storing the output of vmstat 1 10 to a file named abc.txt2)I m applying a filter to vmstat to get desired output containing cpu(user),cpu(system),cpu(idle) values.3)
Code:
# cat abc.txt | grep -vE '(procs|free)'| awk '{print $13 " "$14 " " $15}'
0 1 97
[code]....
On the current machine:> su - username (it works)> ssh username@localhost (doesn't work)
What could be the problem?
When I create a folder in the system, it's created successfully
Code:
[test@localhost localhost ]$ cd test/
-bash: cd: test/: Permission denied
drw-rw-r-- 2 test testinstall 4.0K Sep 16 18:51 test
How to compare oracle database table contains using (Perl/Shell)scripts.
View 4 Replies View RelatedI'm running RHEL 5. When using the GUI System>Administration>Users and Groups, I get the error: The user database cannot be read. This problem is most likely caused by a mismatch between /etc/passwd and /etc/shadow or /etc/group and /etc/gshadow. The program will exit now.
Some research showed that I need to use vipw and vigr respectively to find an inconsistency between these two sets, which I did - to make it easy I copied each from [vipw | vigr] to an excel file and did =exact(%1, %2). There are no inconsistencies.
[Code]...
I've setup a CentOS apache web server, and loaded a site onto it. The site previously was functioning under windows xp (before I "stepped in") and wamp. What I did was copy the site in /var/www, reconfigure the httpd.conf (DocumentRoot /var/www/site, etc). Although when I try to open the webpage I get this error: Database Error: Unable to connect to the database:The MySQL adapter "mysql" is not available.
[code]...
I would like to store JPG files in a mysql database table. I figured that using BLOB fields on the one hand and the 'load_file' command on the other would do the trick. Here is how I set up the table:
mysql> create table blobtable (id int(10) not null auto_increment,
fileName varchar(15) not null,
file longblob not null, primary key(id) );
Query OK, 0 rows affected (0.51 sec)
Then I tried to enter the data:
mysql> insert into blobtable(filename,file)values('pic',load_file('/var/www/temp/IMGP4764.JPG'));
Which got me the following error signal:
ERROR 1048 (23000): Column 'file' cannot be null
It seems to me that the file path to the JPG file (although correct) is the source of the problem, and is causing the load_file command not to work. My first attempt was with the JPG file in my PC's home directory. When that returned the same error message, I figured that maybe the file had to be in the PC's (server's) web area so I put it under the 'www' directory.
I'm creating a comment form for a website but when I try to connect the page with a database it gives me a parse error. here are the codes I wrote:
[Code]....
I have a LAMP server. I know sql but I'm currently learning PHP.
Correct me if I'm wrong, but you're supposed to use PHP to insert/select data from the database, right? If so, SQL shouldn't need a port at all.
Apache uses port 80, but it's listening for connections. MySQL uses port 3306, but I've never logged into it from anywhere besides 127.0.0.1/localhost. I have mysqladmin installed and it demands that I give it an IP so I used localhost.
I'm not interested in doing anything remote, so can I block this port? When I say "block" I mean on the router, not locally through iptables. Obviously I have to foward port 80 because that's how people would connect to my server. But once they connect and send something, my server would interpret the data locally and send it back on port 80.
I want to insert values into a MySql database. The following line works fine:1
Code:
mysql_query(connection, "INSERT INTO main (NumofShows , Title) VALUES('12', 'Home')");
but if the data to be inserted is from a string... like....
Code:
string NewTitle = "Monaco";
string NumofShows = "2";
How do i edit my sql statements so variables can be inserted into the Values ( ) , and it will be able to read the variables and then store it into the database.
the color from the table I insert? All I want to do is insert a basic table with 6 columns and 3 rows. I get that, but it has a gradient blue color.
View 1 Replies View RelatedI'm trying to make a combo box which should have elements dynamically taken from a database. I've an Exam Table,and it has columns Sno,Ename,Month,year. i need the combobox to list to the elements that are present in Ename.
i read some things in the web and tried that out in the netbeans. it said to rightclick the combobox and set bind ->elements and bind->selecteditem. But i'm not sure how to set the binding expressions inorder to get the required list in the combobox.
I have been following this guide to install Apache, PHP & mysql - [URL]. When I get up to the step 'mysql -u root' I get given this error:
Code:
tom@tom-laptop:~$ mysql -u root
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
How do I overcome this?
I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command
cat /dev/null > /etc/pure-ftpd/db/mysql.conf
I am getting this error
almog@Testing:~$ sudo cat /dev/null > /etc/pure-ftpd/db/mysql.conf
-bash: /etc/pure-ftpd/db/mysql.conf: Permission denied
I tried with and without "sudo" and I am getting the same error.
I'm trying to boot into the Live CD (64bit version) and it dies with an error "nouveau .... 0x8DF6 Init table command not found: 0xA9". Get the same error after I install and try to boot into Debian, it starts booting but errors out later.
Running Intel 4770K on Gigabyte Z97X-UD5H with 8G ram, Nvidia graphics card and several SSDs ...
i have tried to follow some the tutorials on google to setup mysql for remote access however, cannot seem to do it. am i missing something.
i have edited /etc/mysql/my.cnf bind-address directive to a static ip address. then, i grant user@'%' access to database and restart mysql
after doing all that, when i try to remote access mysql i get "Access denied for user"
I would like to insert a line into the /etc/sysconfig/iptables with a command like sed or with any script. How can I insert this line:
-A INPUT -m state --state NEW -m tcp -p tcp --dport 80 -j ACCEPT
but under the line "-A INPUT -p tcp -m state --state NEW -m tcp --dport 22 -j ACCEPT"