Now my script is able to start server, But I am still have some problem with my script. When the start server command is executed, the control does not pass the line and does not execute further of that line.what is the problem and how can I get smooth execution of the my script. My Script:
SUBIT="su - adminuser -c "
SERVER_BOX_COMMAND_A="Server"
##############
[code].....
I want to use ssh to execute a command and to wait endlessly to log everything (in file) that comes as a stream of the connected server. But unfortunately, in the manual its written "If command is specified, it is executed on the remote host instead of a login shell"
So what happens is that when I specify my command:
ssh user@server "my_command"
It executed the command and the flow of execution returns to bash shell. So basically my session ends right after the command is executed. This happens only in case I specify command in the command line. If I login into ssh manually and then type "my_command", then the session doesn't end. I want the ssh not to exit, because after "my_command" executes, I want to capture everything in the session.
Two processes are communicating through a pipe: A | B. A is writing data faster than B is reading it in. Is there any way to have A limit its writing rate to match B's reading rate?
AFAIK the pipe will get full, and will make A's writing block, waiting for B to read in more data. But is there a way to limit A's writing rate before the pipe fills up? (In a way it's like having a pipe with a really small capacity, but as far as I know pipe capacity is a constant compiled into the kernel.)
Code:
EXAMPLE FOR CLARIFICATION
Right now the command is printing out the following in 1-second intervals:
But with flow control it should print out (again in 1-second intervals):
...since "date" would block on the writing loop due to the slow reading loop.
I am trying to write a script to set the SGE job execution order. I named each job with 'job1', 'job2' and 'job3'. I want my script to do: When 'job1' execution is complete, 'job2' is executed; when both 'job1' and 'job2' are complete, 'job3' is executed.
First, I tried this following script and it worked well:
########
qsub -N job1 run1.sh # run1.sh includes "mv file_name1 file_name2"
qsub -N job2 -hold_jid job1 run2.sh # run2.sh includes "mv file_name2
file_name3"
########
[Code]....
I need to find out the processing or operating time in milliseconds or in nanoseconds for the instructions or for the whole process!
for eg :
I need to calculate the time taken to execute :
And i dont want the time for whole program :
I have seen command like $rm aa dd cc bb ee then something like $ >> zz // it removes zz also Where aa dd cc bb ee zz are the files in my directory. Do not know exactly.
View 6 Replies View RelatedI have never set-up a chroot-jailed environment before and I am afraid I need some help to do it well.To explain shortly what this is all about: I have a webserver to which users send python scripts to process various files that are stored on the server (the system is for Research purpose).Everyday a cron job starts the execution of the uploaded scripts via a command of this kind: /usr/bin/python script_file.pyAll of this is really insecure and I would like to create a jail in which I would copy the necessary files (uploaded scripts, files to process, python binary and dependencies).
I already looked at various utilities to create jails but none of them seemed up-to-date or were lacking solid documentation (ie. the links proposed in How can I run an untrusted python script)Could anyone guide me to a viable solution to my problem? like a working example of a script that creates a jail, put some files in it and executes a python script?
In bash shell, is there a simple way for me to monitor the time taken to run a script and output the time taken?
View 1 Replies View RelatedI am using CentOS release 5.4 ( 2.6.18-164.9.1.el5xen ) and created an HPC cluster by using NIS ( for user authentication ) NFS ( as file system ) and mpich1 as parallel compilers and utilities and TORQUE as job scheduler. I want to make sure all users should use scheduler for job submission and should not submit the job directly ( qsub job.sh ).
I want to prevent all users from executing executable files created by self , from its home directory .
Suppose if a user create an executable a.out and if he tries to execute by ./a.out it should display an error.We should also allow users to execute normal user level linux commands .How can I implement such a set up in my environment
how I can receive emails about a cronjob execution or where to go to read about that? I am using CentOS 5.4.
View 2 Replies View Relatedi need to take the backup some folders encryption formate with password i used gpg encription in the script but it is not taking the password it throos errorthe syntax is#!/bin/bashtar -cvzf test.tar.gz target ; echo "test" | gpg -c test.tar.gz --stdin
View 3 Replies View Relatedis there any way to decrease the cpu load during qemu execution?
View 5 Replies View RelatedGet the list of virtual addresses being accessed by any application during its execution time. I don't want the complete memory map but just the pages which were accessed during an application's execution?
View 2 Replies View RelatedI am calling a service using http post through wget, the command is successfully executing but for each execution its creating a file and saving variable names n data n it. I want to execute this command without creation of a file. Would anyone suggest me what needs to be done in this regard.
My command:
wget --post-data 'var1=99&var2=200' http://xyz.example.com:5555/invoke/Samples:httpInvoke
For every execution, its creating the files with names:
Samples:httpInvoke1
Samples:httpInvoke2
Samples:httpInvoke3
[Code]...
How to get the list of virtual addresses being accessed by any application during its execution time. I don't want the complete memory map but just the pages which were accessed during an application's execution?
View 2 Replies View RelatedI could run the script from terminal. My script invokes some installation and works fine.But my wish is that end-user should double click the sh script and it should run.But how? I got few links - but none was of was quite helpful
View 6 Replies View Relatedi was thinking that is there a way to check data flow for viruses? i mean if i set up calm av in my internet sharing server could it detect anything in incoming and outgoing data ?!!
View 2 Replies View Relatedhow to configure serial port RS-232 to use flow control? The reason is without flow control is is not working properly(dala loss etc.) Im trying to run it as it is just with setting the flow control flag and Im sending my data via loop-back on the rs-232 to GTK TERM on the same computer... but when I enable IXON/IXOFF in GTK TERM, my sending program cant even open the port...
My current settings is:
Code:
struct termios termios_p;
//ferme_port();
tcgetattr(sc.fd, &termios_p);
termios_p.c_cflag = B9600;
[Code]....
I am working on a build-test system of a set of codes. The system (large enough) is such that one shell script does some work and calls another shell script. This inturn calls a third shell script and so on. How to get the list of all such shell scripts according to the way they are called.? More like a shell script flow tree?
Ex.
Code:
#./1.sh
|
`--> 2.sh
|
`--> 3.sh
|
`--> 4.sh
|
`--> 5.sh ....
.
.
.
etc.
I need to run ./pythonScript keyword one time for each keyword in a text file, how can I do this from a gnome terminal? (without having to modify the pythonScript)
pseudo code:
for each keyword in file:
./pythonScript keyword
waitfor(pythonScript to finish)
I have 3 processes to be executed in a particular sequence.
ProcessA
ProcessB
ProcessC
The requirement is that all the processes should run as background processes.
ProcessA talks to ProcessB and ProcessC using sockets.
ProcessB talsk to ProcessA only using sockets.
ProcessC talsk to ProcessA only using sockets.
[Code].....
I am outstation and having laptop with windows and internet connection. I want to check one small program on linux. kindly tell if some free linux server is available on internet where I can upload my program, compile and execute. The program is generic and there is no restrictions regarding linux version.
View 2 Replies View RelatedIs anyone aware of a detailed "flow chart" -- arrows and decision diamonds, etc -- that describes the file access and permissions processing? I would love to see that diagram. Years ago on a platform far away (Digitial VAX/VMS) their manuals had such a flow chart that covered not only the user-group-owner and read-write-execute permissions decision making but also include "access control list" processing at a superficial level. If someone has access to the VAX/VMS flow chart, that might be a start toward sorting what linux does.
View 4 Replies View RelatedDoes any one know any software or utility that draw the graph or flow chart of an application (if application code is on multiple files)?
View 1 Replies View RelatedI have here a Network Monitoring tool that should monitor the Apache (httpd) 2.0 on CentOS 4.3, but I didnt have any background in using linux, I tried CentOS 5.5 with Apache (httpd)2.2 and it works, but whenever I tried it on Centos 4.3, it doesnt work at all, it has an error Testing on node localhost.localdomain: failed with Undefined status, Script execution failed. Input string was not in a correct format.
View 10 Replies View Relatedi successfully installed the nautilus elementary on ubuntu 11.04 and the clutter flow as well and it was working as charm, but when i installed the ATI official driver, it starts to crash ( i mean clutter flow ), i uploaded a screen-shot of what it turns to.
View 2 Replies View RelatedI have a Pure Evoke Flow radio that connect to my wireless router for streaming internet radio, this works fine. It also has the functionality to connect to a hard drive over wifi and play any MP3 files on it and it runs on Linux.
With Windows (sorry) I just click on the folder and make it Shareable, on the Radio I then set it to search for servers and it finds my wife's PC and plays her music.
I have (I believe) set my music directory on Ubuntu 9.10 to be shareable, it downloaded and installed a couple of files including samba and then rebooted. However my Radio cannot see it.
Bash's command history is great, especially it is useful when adding the history -a command to the COMMAND_PROMPT.However, I'm wondering if there is a way to log the commands to a file as soon as the Return key is pressed, e.g. before starting the command and not on completion of the command (using the COMMAND_PROMPT option would save the command once the prompt is there again).
I read about auditing programs like snoopy and session recorder like script but I thought they're already too complex for the simple question I have. I guess that deactivating that script logs all the output of the command would lead already in the right direction but isn't there a quicker way to solve that probelm?
We have something on our network that is reaking havoc with our content filter. I am trying to track it down, but so far I have been unsuccessful. We have approximately 500 devices in 100+ different locations spread across 9 states. Looking at each computer is not really feasible.
I need a machine that can sit in between our network and our internet connection and graphically monitor in real time and logs how much traffic each device is sending and receiving. It would need to sit inline so it has to have two nics and be able to pass traffic. The machine also needs to be transparent. Reconfiguration of our routers or workstations is not an option.
I have used ethereal and wireshark before. Ethereal may be a viable option, but wireshark seems to provide lots of information, but no practical way to make use of it. how to set up the box to be a transparent device on the network that will allow internet bound traffic to flow (freely)?
Up until now I've been using plink to remotely compile a project I'm working on. But recently the administrator from the remote server updated the distribution and messed up some configurations. My project has a lot of scripts written for tc shell (tcsh), and now the default shell is bash. There is no way to change this. Another problem is that now I need to run newgrp to change my default user group.
So... to work around this problem I've changed my .bashrc to run newgrp and then tcsh. If I do a normal connection using SSH, everything works as expected, but when using plink, or SSH to remotely execute commands, the shell gets stuck on the newgrp command. I think it's because both applications need a return value from newgrp to send the command I need to execute. Remotely running scripts that call a shell also get stuck like newgrp (newgrp also opens a new shell and that's why it gets stuck) my .bashrc is as follows:
Code:
user_grp=`id -g`
if [ $user_grp != 4919 ]; then
newgrp new_group_id
else
[code]....