I have just build sarg, something wrong with my task. i haven't see log on website even on command in putty.This is brief short for my sarg.confQuote:
#access_log /usr/local/squid/var/logs/access.log
access_log /opt/squid/logs/access.log
#output_dir /var/www/html/squid-reports
[code]....
i have just install Sarg-2.2.3.1.tar.gz but When finished compiled i cannot see sarg.conf (in directory /etc/.. or /etc/httpd/conf.d). May i know where is it.?? I'm not sure compiler which it's work good or not good. Some logs show in here:
Quote:
[root@proxy sarg-2.2.3.1]# make install
cp sarg /usr/bin/sarg
chmod 755 /usr/bin/sarg
cp sarg.1 /usr/local/man/man1/sarg.1
chmod 755 /usr/local/man/man1/sarg.1
[Code]...
I am trying to configure Sarg to read my Squid access.log file.When I run Sarg from either the command line or from Webmin I get the following error:
Code:
SARG: Records in file: 8343, reading: 100.00%
SARG: No records found
[code]....
I have been trying with several different distributions and finally tried with Ubuntu. The iso matched up with the hashes but the boot record is still not being found...are there tips other than burning slower to ensure a good burn?
View 2 Replies View Relatedi have a Archlinux PC working Squid like proxy server and SARG for read the access log from Squid. The Squid log only show me 192.168.0.0 making http request, i need show the local IP from each PC on my network. I read in other page i need rebuid squid with follow_x_forwarded option, how i can do that? exist other way ti do that?
View 1 Replies View RelatedWhwn I am sending mails , I used too get message like
Host found but no data record of requested type.
MTA: postfix
I had installed koha 3.0.0 successfully.I am able to import data by using Marc Editor but i am not able to edit the data of ITEMSit shows the following errorThe following fatal error has occurred:found MARCXML element datafield, but the <record> wrapper is missing at /usr/lib/perl5/site_perl/5.12.3/MARC/File/XML.pm line 452ApacheServer version: Apache/2.2.17 (Linux/SUSE) Server built: 2010-10-21 14:13:51.000000000 +0000
Koha3.00.00.107Koha DB3.0000107MySQLmysql Ver 14.14 Distrib 5.1.53, for suse-linux-gnu (i686) using readline 6.1OSLinux koha-test 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 i686 i386 GNU/Linux
Perl5.012003Or
i am using red hat linux 5.0 when i start my computer it shows me the message ofINIT:No inittab file foundEnter run level:i dont what to enter here if anybody know then
View 7 Replies View Relatedi format and reinstall centos after that i create one sambha share and valid users restart smb service but i am unable to access it from windows pc shows network path not found any other service need to start
View 2 Replies View Relatedhow to report the sarg with host name??
View 1 Replies View RelatedSARG seems ok but it is not generating any reports.... "Now generating Sarg report from Squid log file /var/log/squid/access.log squid and all rotated versions .... Sarg finished, but no report was generated. See the output above for details. There is also no view generated reports too.
View 1 Replies View RelatedWhen I start the SARG, its blow up with segmentation fault. Linux intra.local 2.6.18-53.1.13.el5 #1 SMP Tue Feb 12 13:02:30 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
I already tried to empty all squid cache log and recompile (yum remove and yum install again) the sarg rpm w/o sucess.
I just setup a new squeeze debian 6 server, it will work as proxy server with squid. But I have an issue when i want to install sarg (sarg-report), i cannot find the package thru aptitude/apt-get, however it was present in lenny distribution. Is it a miss in squeeze, is it discontinued or should I add a specific entry in /etc/apt/sources.list? (currently squeeze main, squeeze/updates main)
View 3 Replies View RelatedHow to configure SARG to monitor SQUID?
View 1 Replies View Relatedhow can i exclude specific ip frm sarg reports? i have done with exclude_hosts but still it is not working, any one have solution on this?
View 1 Replies View RelatedI am using SARG for squid report analysis. And it is working fine. But I want to know if there is some custom configuration possible to link the SARG image at the top of the page to my custom location instead of its default homepage on sourceforge? For the ease of understanding, I am attaching the page screenshot here. The SARG image I am talking about is the one on the top in blue colour. It is linked to [URL] and I want it to link it to my sarg homepage.
View 2 Replies View RelatedI am getting an error when i generat a report with squid's report generator ( sarg )is there a tool or way that i can find where in the log file the error is, the log file is 61442 lines, and it's gonna take me forever to find the error,
View 1 Replies View RelatedI recently upgraded to Ubuntu 10.04 Lucid Lynx from the previous version. After doing so, all of the games I have installed that require 3D of any kind (and one that does not) refuse to start with an error similar to the following:
Code:
$ openarena
openarena: error while loading shared libraries: libfusion-1.0.so.0: cannot open shared object file: No such file or directory The complete tests will be attached seperately. For the purpose of this post I tested DOSBox, Sauerbraten (Cube 2) and FrozenBubble. All fail to start and all complain about not finding libfusion-1.0.so.0. I cannot find that particular version installed but a newer version appears to be in place:
Code:
$ locate libfusion
/usr/lib/libfusion-1.2.so.0
/usr/lib/libfusion-1.2.so.0.8.0
/usr/lib/libfusion.a
/usr/lib/libfusion.so
/usr/lib/googleearth/libfusioncommon.so
I can't imagine so many games would be left with an old dependency and forced not to work. I made sure that the games I tested were all in the official repos and if I accidentally include one that isn't, please disregard it.
As an aside, Wine applications requiring 3D start just fine, like Star Wars: Jedi Outcast in OpenGL mode.
It's a long story, but on my tri-boot (Ubuntu 8.04, Win 7, Win XP), both Win 7 and Win XP need to know that Linux has previously run. I've therefore written a little program in REALbasic that automatically creates a text file named linuxran.txt and puts it into the root folder of the partition where Windows XP is installed. Under Ubuntu, this location is known as "/media/Win XP". It's an 80 gig partition of a 1 TB drive, the same disk that Win 7 is installed on. In my partition app under Win 7, I labeled the partition "Win XP."
The good news: When Ubuntu is completely up and running, the program runs fine. It checks if the file already exists, and if it does not, it creates it. So in Ubuntu, under System ==> Preferences ==> Sessions ==> Startup Programs, I put my little program, figuring it would run just fine. The bad news: Unfortunately, it didn't. It's trying to start before Ubuntu has mounted the "/media/Win XP" drive/partition.
Possible solutions: 1. If I could somehow set my program to run after I know the other drive has loaded, I would be all right. I know the prog is fine once the drive is loaded, because it does what it's supposed to when I run it. Is there some way to put my app in the startup process after Ubuntu has mounted all the drives? 2. Put some code in my app to make Ubuntu mount that drive before the rest of the prog runs. Not sure if this one is practical. 3. Set the program to run, not when Ubuntu first starts up, but rather, right before it shuts down.
I like option #3 the best because it would require no re-coding. Ubuntu would have had plenty of time to mount all the drives. Is there some way to tell Ubuntu, "whenever you're told to shut down, always run this little program first?"
Running Ubuntu 10.10 x64, fully updated kernel and stuff, in VMWare Workstation 7.
Before I tried installing the Nvidia driver, I set up all my stuff, settings, etc. Restarted several times, everything went okay.
I then decided to install the Nvidia drivers for my GTS 250. I first tried the manual install (sudo sh NVIDIA-INSTALL-NAME.run) and it failed saying something about the nvidia.ko or nvidia.so. I tried using this page http://ubuntuforums.org/showthread.php?p=9203671 to fix it, but it still failed, so then I used the automatic method (sudo apt-get install nvidia-current) and it installed fine, then I ran nvidia-xconfig and restarted.
The VM started up, but no GUI came up, instead, a black screen with a terminal (I think it's called a Virtual Terminal) came up and asked me to log in. I tried the command "startx" from there, and it told me no screens were found.
What can I try?
having a problem getting my web camera recognised at start up. when i boot my machine and run , cheese or skype no camera , if i unplug it and plug it back in it works fine . Till i shut down and boot up again .
View 1 Replies View RelatedAfter installing a second screen and trying dual screens, i never backedup the x11 xorg.config file and recklessy overwrote my settings through that nvidia panel... Now to find that x wont start :(EE) no devices detected Fatal server error: No screens found
how i'd be able to share my xorg.config file with you guys, I am using my ipod now... Anyone knows anything? I tried reconfiguring and didn't work.. How do i share my file so you guys can find the flaw? Or how do i find the flaw myself?
I start Kmail, Akonadi tries to start a server and it fails (I removed the first 5 tests that were correct because otherwise this post would be to long). This is the report it gives:
[code]...
What can I do to let it start correctly, or is there a way to disable Akonadi? It's very annoying that every time I start Kmail, Akonadi attempts to start.
I want to install ubuntu 10.10 alongside XP but all the CD's don't start (the CD's are The linux format magazine DVD and the 10.10 CD). When I install ubuntu via Wubi, if I ubgrade from 10.4 to 10.10 I can't star up Ubuntu and it gives me this eror mesage "eror: file not found".
View 9 Replies View RelatedI'm stepping out with LDAP for the first time. It's up and running. My Question is really closer to DB4, the Berkely database. When I start the ldap service I get this output:
# service ldap restart
Stopping slapd: [ OK ]
Checking configuration files for slapd: bdb_db_open: Warning - No DB_CONFIG file found in directory /var/lib/ldap: (2)
Expect poor performance for suffix dc=example,dc=com.
config file testing succeeded
I have encountered a bug in plasma desktop - clock widget tool, when browsing months. I found in Kmenu>Development>KDE Bug Management Tool but don't know how to use it. I try everything in the menus to record and reproduce the bug, but nothing happens.
View 2 Replies View RelatedThere is something that I am not getting here. I get the following when I try to start my XP virtual box stuff. I take it that I actually need an XP disk to do this?
FATAL: No bootable medium found! System halted.
Here is a capture of what I have setup for XP virtual.
Uploaded with ImageShack.us
I cant start Nfs services. When I type the comman /etc/init.d nfs start I get "Not starting NFS client services - no NFS found in /etc/fstab/. I used yast to install nfs server already
View 9 Replies View RelatedI need to point aaa.com to bbb.com in DNS. I know it is possible to add subdomains for aaa.com to point to bbb.com (or its sub-domains) but in this case I need to have aaa.com point to bbb.com. I used the following in zone file of aaa.com but it didn't work
----------------
@ IN CNAME bbb.com.
----------------
I am going to configure sentmail server i.e[root@mailserver ~] on Red Hat Linux 4 Enterprise.Already I have configured DNS server. I want to add record of my mail server in my DNS server.Kindly just guide me that what
Code:
$TTL86400
@IN SOAns1.mydomain.com. root.localhost(
42; serial (d. admin)
3H;refresh
[code]....