I use CentOS. My system recently updated its packages and kernel was updated too. I want to revert to my old kernel without xen.GRUB shows only 3 kernels and all of them are centos.plusxen
CentOS (2.6.18-194.11.3.el5.centos.plusxen)
CentOS (2.6.18-194.11.1.el5.centos.plusxen)
CentOS (2.6.18-194.8.1.el5.centos.plusxen)
[code]...
I've got an UK keyboard, and every time I boot up, Ubuntu keep reverting back to the US keyboard layout which is annoying me. I open up keyboard preferences, the UK layout is already selected. So I delete the US layout, click on "Apply System-wide" and it works. Until I reboot and the US layout is back in there! I suspect it's something to do with not having admin privileges to permanently save the changes - if this is the case, why it doesn't ask me for my password, or give me a chance to escalate my privileges or something?
View 2 Replies View RelatedUsing karmic on acer aspire 5332.Wifi was working from fresh install but would drop out often and sometimes freeze laptop resulting in hard reset.Installed Ndiswrapper to try windows wireless drivers unfortunately i can't get them to work. How can i revert back to original supplied drivers?
View 2 Replies View RelatedI reverted back from Gnome3 to Unity using ppa-purge, but now I have 2 annoying issues: The launcher reverts back to its default after login/logout. Any extra items I "Keep in launcher" are gone. The clock is stuck in 12h mode and it doesn't take any new settings. 24h clock, showing seconds etc. all fail.
I have 2 different systems affected, one 64-bit and one 32-bit (pae kernel).
Recently installed Ubuntu. It resurrected a dead machine. While using Miro, I went to a site in Firefox to check on a video downloads. The site said I couldn't play their files and gave me the option of downloading flash. Since Ubuntu was having trouble getting the dependancies together for me to load flash and make it work, I downloaded their offer. Now Miro doesn't recognize any of the available videos to download when I try to access them. How do I reverse the downloads?
View 3 Replies View RelatedI'm using CentOs 5.4 (2.6.18-164.15.1.el5 #1 SMP Wed Mar 17 11:30:06 EDT 2010 x86_64). I tested out ext4 on a partition for the last few months and it seems to work fine. The issue is that quotas dont seem to work correctly on it. Is there a way to revert back to ext3? Mainly the quota tools do not work on it.
View 1 Replies View RelatedI just executed: yum remove openssl on my virtual test Centos.I'd like to revert settings back to as it was at the beginning, i mean having all commands again.Now i don't have ls, wget, yum, find, rpm...etc.Any idea how to get my Centos back?
View 4 Replies View RelatedI need a version of linux (an distrb) with compiler gcc 3.4. This is for academic purposes. Does anyone know of a site where I can download such an iso?? Or alternatively I have a version of Opensuse (10.3) but I am having trouble reverting to the old compiler?
View 2 Replies View Relatedi have been messing with my mesa opengl drivers and ati proprietary drivers for a while now. i cannot get them to work smootly for games (urban terror, nexuiz, WoW)i am currently on mesa experimental 7.9 i know that 7.8 with FC13 worked and there is 7.10 in rawhide right now.Problem is,n't know how to revert back to 7.8 or install 7.10 from rawhideshould be a simple answer from someone that knows
View 3 Replies View RelatedI have just downloaded CentOS 5.3. The kernel version is 2.6.18.xx However, when I updated the kernel version has not changed. Still 2.6.18. Unless something went wrong with the updates. The most up to date kernel is 2.6.31.xx I was thinking shouldn't it update to this new kernel? On my Fedora 12 I have 2.6.31. However, I thought the kernel of 2.6.18 would have been updated as least a little.
View 4 Replies View Relateduname -a
"
Linux localhost 2.6.31.9-174.fc12.i686.PAE #1 SMP Mon Dec 21 06:04:56 UTC 2009 i686 i686 i386 GNU/Linux
"
the above output was found after installation and running an application software other than operating system. Also it shows error below.
"
- Verifying all software dependencies are available: ERROR
* The following files were built for an operating system other than Linux:
......
I have been trying to install HP Storageworks DAT72 on CentOS 5 in vain. On system reboot, neither /dev/st not /dev/sg is available.
lsmod
Module Size Used by
ipv6 267617 40
xfrm_nalgo 13381 1 ipv6
[code]....
When i try to run the rpm for lynx (lynx-2.8.5-23.i386.rpm) It comes up with :
warning: lynx-2.8.5-23.i386.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2
error: Failed dependencies: libcrypto.so.5 is needed by lynx-2.8.5-23.i386 libssl.so.5 is needed by lynx-2.8.5-23.i386
after update to kernel-2.6.18-164.el5 one of the 2 NIC's of my machine are only found at 1 of 4 reboots. Using the old one kernel-2.6.18-128.7.1.el5 all is fine. This are the to NIC's:
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 0c)
And the Intel one, makes the problems with the new kernel.
I compiled my kernel, compiled scsi support into kernel, used the new kernel and initrd, the boot failed.Then ,i unzip my initrd, found that sd_mod.ko can't be insert, i added it manual, and reboot OK.so, why! in the kernel configure , the sd_mod.ko is set to <M> , but why it can't be found in initrd?
View 1 Replies View RelatedThe server runs# uname -r2.6.18-128.4.1.el5However, today I executed yum update kernel*due to security advisory. I was just about to reboot the system when I realized that it runs VMWare Server Instance that will most likely fail to restart after kernel upgrade (I had a hard time fixing it after previous kernel update). Now I want to keep 2.6.18-128.4.1.el5 after reboot.I see that new kernel is scheduled for booting:
# cat /etc/grub.conf
default=0
timeout=20
[code]....
When I first installed openSUSE 11.4 the /boot directory looked like this:
I had installed VirtualBox through Yast and decoded to delete. After deleting the /boot directory looked like this, pointing now to the desktop kernel.
I went into YAST and deleted all kernel entries that contained desktop, trying to get back to the original configuration.
After doing this, the /boot directory now looks like this.
Is there any way to get back to the original kernel configuration without having to do a complete installation?
I'm running CentOS 5.3 and would like to know what the "best" or "proper" method is to build a custom kernel using the generic kernel sources from kernel.org. Most of the references I've found talk about modifying the current CentOS kernel using the RPM way. I really want to have the latest kernel due to some important security issues that haven't been addressed in the current CentOS 5.3 kernel.
View 6 Replies View RelatedI just updated my kernel from 2.6.32-21 to 2.6.32-22 today. Now I am getting no sound. I have checked my mixer levels with both kmix and alsamixer. Nothing appears to be amiss. I tried rebooting with the old kernel and still no sound.
View 2 Replies View RelatedI just did an update of new files including the new linux kernel (Ubuntu 10.04LTS) and it killed my opening GRUB bootloader screen plus the NEW firefox update is working dog slow. How to I get the GRUB screen back so I can go back to an earlier kernel version??
View 1 Replies View Relatedwaht is kernek log daemon..? why kernel log daemon always stop and restart back automatic?
View 1 Replies View RelatedI have a black back ground around my Cairo Dock icons since the kernel update on 5-4. can anyone please tell me how to remove this.
View 1 Replies View RelatedWhen I run yum list installed command the output shows two kernels:
[Code].....
Would it therefore be safe to remove the first kernel in the installed list to save having two kernels being updated everytime I run yum update? Or is the PAE kernel dependant upon the original?
I'm in a bit of a bind, hoping that there is a quick easy answer that I can be pointed toI'm developing on a legacy cakephp 1.2 app that isn't running well at all under php5.3, apparently there are know issues, I'd like to revert my currently installed 5.3 setup for 5.2. upgrade to latest cakephp version not an option unfort.is there a yum command that I can use to do that with, I'm using the jlitka repos and am not totally yum savvy
View 1 Replies View RelatedWay to revert my 10.04 (2.6.31.21) to 9.10.
<rant>10.04 has been a disaster for my Acer laptop. NVidia must hate Ubuntu because any time I try to load into 2.6.32.22, the damn thing black-screens and dies. 2.6.31.21 "works", but I get flooded with errors related to the generic nvidia drivers. And I've specifically NOT installed the proprietary drivers because I know from past experience that they kill my computer, regardless of which Ubuntu version I use. Plus 10.04 is just... why did they change everything? The default color scheme makes my eyes bleed, and even the close/minimize/maximize buttons are in the wrong place. But that's minor... The real problem is that my graphics capabilities are shot to hell, and since this is a computer used for work-related image processing, I need 9.10 back.</rant>
Reinstalling from disk is not an option since any install disc (alt or otherwise) newer than 8.04 fails. (A fresh install of 9.10 involved installing 8.04 => 8.10 => 9.04 => 9.10) Is there a simple apt-get type command I can use to revert it?
I,m using Ubuntu 10.10 with Gimp. Ive got a lot of photos etc and need to back these up. Can I anyone suggest a good backup solution which does not require e to keep copying the same files? IE: Once the files are backed up I only want to back the files used since last back up?
View 11 Replies View RelatedThe first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
I built a home server (NAS/WWW/SSH/media server etc) and chose CentOS 5 as the OS (stability, easy of configuration).I was just about to start tuning the power consumption when I realised that the kernel CentOS uses is so "old" that it does not support the latest reduced power consumption enhancements that Linux has achieved in big strides in the recent past (we are probably still talking 6-12+ months ago e.g. tickless kernel)..
So my questions; 1) I know CentOS was maybe not meant for home servers (certainly its not its primary purpose), but if it is, any ideas of what kind of power consumption it takes (I know its relative) and if there are particular power consumptions that are worthwhile?
2) Do you recommend me compiling my own 2.6.21+ kernel from kernel.org or am I just likely to have compatibility issues (I really did not want to do that) or when is CentOS 5.4 supposed to have a newer 2.6.21+ version kernel?
Was it wrong of me in principle to choose CentOS for a home server when I am power conscious? (I don't have a low-power VIA processor either but a P4 so I am really just hoping to make do with software changes).
I am an old days RH release user(from 6.x) and just switching back from Debian/Ubuntu to CentOS on some servers, but I can not understand the kernel update strategy currently enabled in CentOS.There are two boxes, with almost identical installation, but recently there was an auto update of kernel on one box. This auto update also seems to issue an auto reboot on the machine, which is unacceptable on server machines.
View 2 Replies View RelatedI'm setting up a raid 5 on several hard disks with a layer of lvm on top for good measure.I know the recent kernels support growing software raid, but since centos runs 2.6.18, I wanted to make sure it'll work. Does the centos kernel support growing raid devices?
View 1 Replies View Related