I have a partition, which is 32GB and is mounted to / of the archlinux distribution.I want to create another partition, I need about 5GB and I want to take them from this partition.If I use parted to resize the partition will I lose any files?
View 5 RepliesI have slackware 13.1 installed on my desktop and I have all my hard drive dedicated to it. But now Im thinking about resizing my hard drive so that I can install windows so my brother can play games on it ( probly giving 50 Gigs to windows )I heard that parted ( located on slackware cd 1 ) is what I should use. So I was wondering if I need to backup any important files before doing the resizing? I would also appreciate it if someone could link an good tutorial for doing partition resizing .
View 2 Replies View RelatedI'v tried to resize disk partition with GNU Parted resize command, but it didn't work.
View 2 Replies View RelatedI have a 10GB IDE disk that Parted says has a single 10GB partition (/dev/sdb1) which is mounted at /home. However, df and the Gnome file managers see it only as a 3GB partition. It was a 3GB partition when I was using Fedora 9 but the partition was resized to 10GB during the installation of Fedora 11.Can anyone suggest how to make df and Gnome see it as a 10GB partition?
View 3 Replies View RelatedI am trying to partition a 6TB volume using parted, but I am a bit confused with the syntax. From the (parted) prompt, I know I should use the command "mkpart primary <start> <end>". I guess that <start> should =0. How do I tell what <end> should be? I want it to fill the entire volume but I don't see how to tell what the exact number should be.
View 1 Replies View RelatedIm using parted when doing a new disk. If the disk is ext[234], xfs, jfs, parted displays the partition correctly, but if the partition was formated using reiser4 or btrfs the "File System" part there is nothing, like there is no formating done to the partition.
This is how Im using parted:ex.: parted -s /dev/sda print
Does anyone knows a patch to fix this issue?
After trying without success change from windows to ubuntu (dual-boot unsolved problems), I decided to try slack as I have seen that user to user support for slack is usually best oriented and faster.But I am having some problems in order to install slack because of GPT support. As I know its a bad idea to start to asking for help without speak what I have tried, lets to this first:
At first I tried just to boot from DVD and went through the install using the help inside the disk. It doesn't work because either fdisk and cfdisk that are suggested in help doesn't offer support to GPT.
After that first try i looked to:url
But also it suggest the use of fdisk. However, it suggested too that I could use another partition application and since I have the live cd for ubuntu, I tried to partition from there and use those partitions for installation.
At first I tried to format as ext4, but i discovered that slack still dont offer support to this format (at least the version that I downloaded).So I tried again but this time using ext3 as format to my / and /home and use the swap offered in the application for use as swap (duh!)But every time I try to install using the dvd it doesnt find my partitions with fdisk, only with the parted command I can see my partition table displayed correctly.However, every time I try to run setup it say that it didnt found and linux partition (swap also when i try to target).So this is my dilemma, I cant use fdisk, in the parted manual (url) it only says that it supports ext2 (not mention ext3) and also i dont find any command to use with parted to mark the partition as 82.I ran through this 2 other posts (url), but as I am still waiting for some update there I decided to ask it here hoping to discover that this is an easy problem.
I need to resize a NTFS partition in a disk for which I have an image (dumped with dd).
I mounted it through the loop device on linux:
# losetup -o 32256 /dev/loop0 disk.img # I got the offset from looking at fdisk's output
# mount /tmp/t /dev/loop0
# ls /tmp/t
[content of NTFS partition shows correctly]
# umount /tmp/t
# gparted /dev/loop0
gparted shows me the disk correctly; it just contains one large NTFS partition I want to shrink.
I have it had it running for one hour now.
Question: will this work? There is lots of disk access but the timestamp and size of the underlying file disk.img remain unchanged.
I want to increase the size of my Linux partition (yellow and highlighted in image), which is situated in an extended partition, along with my biggest partition.
When I try to select the options from any partitioning software (EASUS, Paragon, Gparted) the option to resize is not available (or can't enlarge).
For example in the Paragon Hard Disk Manager, I can't add free space before the partition, even if I first shrink the "G:" partition, then try to enlarge the one with Linux.
Do you know what's happening here? Why am I not allowed to resize the partition?
Computer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
View 9 Replies View RelatedOS: LINUX RHEL5
I want to resize the partition
for example..
my
/u01 is 50 gb.
/u02 is 30 gb.
i need to risize /u02 to 100gb( i have space left of around 60 gb and I need to take 10gb from /u01)
I'm trying to resize a partition from a command line using the instructions on this page:
[URL]
The line below is the one I can't get to work right.
Quote:
Now, using fdisk, we must resize hda1 to 6000M, and create a new partition. Command: "fdisk /dev/had".In our case, the fdisk commands are "p d n p 1 1 +6000M t 7 a 1 n p 2 enter enter w", resulting in this "fdisk -l /dev/had" output :
I've made this work before but I cheated by using Acronis to create the partitions. I really want to get it to work from command line.
l my root (/) partition has 11G free space and my /home is only left with 5g around and /usr has around 8g in my fedora 13 .So is there any possibility to "resize" the root partition and add it to home partition bcoz i see the opposite in the threads(resize home to add space to root).My home has nothin more than a movie which is 700MB and i've installed some new application yesterday. But it shows half of the space is almost used!!!
/dev/sda7 12G 925M 11G 9% /
tmpfs 497M 2.6M 495M 1% /dev/shm
/dev/sda9 12G 5.0G 6.0G 46% /home
/dev/sda8 12G 4.1G 7.3G 36% /usr
Unable to resize fedora 12 lvm parition with gparted. Need to resize to make room for ubuntu linux on same drive. When the fedora lvm parition is selected gparted says "No lvm support at this time". I am using gparted through the pmagic (partedmagic) linux boot disk. I have almost the lastest pmagic (5.7) there is a pmagic 5.8 on source forge.
View 2 Replies View RelatedI need to make my root partition bigger to add more free space. Is there a Linux version that will fit on a small usb flash drive that has the tools I need? I plan to boot a Linux distro from a flash drive in order to resize the partition.
View 1 Replies View RelatedI didn't know a resize operation on a 750 GB disk was going to take 40+ hours, and I was biting my nails the whole time, until the power went out when "only" 8 hours where left.I can still mount the partition, and many of the files are still there, but some files show as '? ? ? ? ? filename.ext' with ls -l.If I try to go inside such a directory: Input/output error.
View 1 Replies View RelatedI have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
I have 2 identical disks, /dev/sda and /dev/sdb. I have a raid-2 configuration (/dev/md0) on /dev/sda3 and /dev/sdb3 partitions. On top of /dev/md0, I am running LVM. There are also partitions sda4 and sdb4 following sda3 and sdb3 respectively but the data in there are not important. What I want to do is delete the sda4 and sdb4 partitions and extend sda3 and sdb3 to the end of disk, and grow the md0 and the volume group of course *without* loss of data.
View 3 Replies View Relatedi just got ubantu and want to delete vista btw ubantu only has 3.57gb how do i increase that to the full harddrive? also g parted doesnt allow me to delete vista???
View 10 Replies View RelatedWhat file system choices do I have for fedora 14, what is suggested and can parted magic provide that system?I am loading fedora on the second hard drive of my laptop with windows 7 and XP pro on the other hard drive and I will also be repartitioning and reformating the first hard drive because windows 7 is 64 bit and the xp is 32.
View 9 Replies View RelatedI installed Fedora 13, but did not expect it would set up a LVM on the entire remaining unpartitioned space.
So I'm now trying to resize the partition the LVM is on. I already resized lv_home using system-config-lvm... however now lv_swap resides at the end of the physical volume. If I assume correctly that this also means that it resides at the end of the sda6 partition, I need to move it in order to resize the partition.
It now looks like this: [URL]
How would I go about moving lv_swap right next to lv_home? And how can I actually resize the partition? gparted doesn't seem to be able to resize lvm2 partitions.
Ubuntu 10.04 64-bit (installed on installer)
What will be an easy and safe way to resize partition? Boot up the LiveCD? Or can I run resize2fs on Ubuntu while the latter is running?
Code:
This is a newly installed box without files on /kvm. Now I want to resize /home taking up the complete capacity of /kvm which will be removed/deleted.
I'm running Fedora Core 14 on my server and in copying over all the stuff I had backed up before the install, i recived the message that one of my volumes was nearly out of space. Since this is just a partition on my hard drive, I could resize it to make it larger, but I don't know how. It's a ext4 partition on my 2nd hard drive.
View 10 Replies View RelatedOn recomendation from the team installing the DB on our new server, all the partitions etc on our VM were created as LVM's. The setup for this is like this:
Disk 1
-> /boot
-> /swap
-> LVMpartition1
[Code]....
I have a default centos 5.x install on an 8GB hard disk. (This means the volumegroup is mounted to / ). I've increased the size of that hard disk to 12GB. (so yes, fdisk says my disk is 12GB)
I now need to increase the LVM to use the 12GB instead of the 8GB. Every single article I've come across says:
"run lvextend on your vg you want to increase, then unmount, reboot, run live cd or whatever and then run resize2fs".
But of course lvextend +anyG returns an error saying not enough free extents
lvextend +100%FREE returns saying the extents matches extents
How can every the google result be wrong? How can I simply tell this LVM that it's now a few gb larger?
I need to resize (increase) LUKS partition. I have found a lot of manuals, but they are just for LVM volumes(I dont use LVM and I dont plan to use it). I have HDD splited to the 4 parts:
sda1(/)
sda2(LUKS)
unalocated
swap
I want to increase LUKS partition, by using the part of unalocated space.
BUT I dont want to do the following:
Backup data from LUKS partition
Delete LUKS partition
Create new bigger LUKS partition
Restore data to the LUKS partition
I've been upgrading a Fedora server over the years. Once it was Fedora Core 2 now it is Fedora 10. Now I want to continue the upgrade process and upgrade the server to Fedora 11. The problem is that the boot partition is 100MB but Fedora 11 wants a 200MB boot partition. Looking at Fedora 13 it seems a boot partition of 500MB is gonna be the norm. I would just resize the boot partition but there is a LVM directly after it taking up the rest of the drive.
How do I resize my boot partition in this scenario?
My current line of thought is to use G4L to backup both partitions, then restore the boot partition to a large drive, increase the size with parted then restore the LVM backup after it.
So far G4L has been reluctant to backup the boot partition of Fedora on a test rig to an NTFS drive. Not sure if I should be backing up the image to a ext3 drive.
I want to install linux next to my Windows 7 Ultimate x64 and changed my windows partition from 700GB to 100GB. Now I want to use the other 600GB for linux and formatted it in Paragon Partition manager.
But when I try to install OS 11.4 I get the message that it can't resize the partition because of the type (which is NTFS) and it wants to delete the whole disc including the windows partition. How do I fix this? Do I need to delete the 600GB partition again in Paragon so its unallocated and then use Suse on it?
Or can I better first install Linux and then Windows? (for next time so it would be nice if the above worked out)
I have read several tutorials on how to install it on my Laptop with pre-existing XP without destroying XP in order to get a dual-boot system. For example on those two pages...
[URL]
and
[URL]
...it reads that in the Ubuntu install menu I have to select "manually edit partition table", which I have found and selected, and then I should supposedly be able to edit the size of the desired partition. However, no option for changing the partition size appears. Instead I get a menu where I am asked to determine how I want to mount the partition (as ext4, ext3, etc.) and if I want to format it. However nowhere it mentions anything related to "change size" or similar.
i can't resize my partition sda1?
View 3 Replies View Related