I need to make my root partition bigger to add more free space. Is there a Linux version that will fit on a small usb flash drive that has the tools I need? I plan to boot a Linux distro from a flash drive in order to resize the partition.
View 1 Replies
l my root (/) partition has 11G free space and my /home is only left with 5g around and /usr has around 8g in my fedora 13 .So is there any possibility to "resize" the root partition and add it to home partition bcoz i see the opposite in the threads(resize home to add space to root).My home has nothin more than a movie which is 700MB and i've installed some new application yesterday. But it shows half of the space is almost used!!!
/dev/sda7 12G 925M 11G 9% /
tmpfs 497M 2.6M 495M 1% /dev/shm
/dev/sda9 12G 5.0G 6.0G 46% /home
/dev/sda8 12G 4.1G 7.3G 36% /usr
I have a flash drive that I use to sync my work- and home-computers. Rsync has occasional issues syncing between FAT32 (which I use on my flash drive b/c it's universal) and EXT3.
I decided to create an EXT3 partition on the flash drive in an attempt to alleviate the rsync woes. My problem is that when I create the partition using GParted, Ubuntu auto-mounts it with Root as the owner. I had GParted check the drive, and it found no errors to repair.
One other weird thing is that the EXT3 partition shows 84.7MB being used immediately after creating the new partition.
The FAT32 partition mounts fine, is read/write, and only shows 4KB used after the new partition scheme.
I tried doing new partitions a number of times, with EXT2, EXT3, and EXT4 just to see if that mysteriously made a difference. Each time that partition would mount w/ Root as owner.
I've a flash drive that it's partitions formatted as fat32, ex4 and encrypted ext4. It works fine on the system that I've formatted it on, but when I try to use it on my other Linux distributions I get these problems:
* ext4 partition accessible by root only.
* after entering my pass-phrase I get
Code: /dev/mapper/udisks-luks-uuid-***** uid1000 is mounted What I'm asking for is a way to create the ext4 file system without being attached to some UID and to be accessible by any user.
Computer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
View 9 Replies View Relatedwhile using it or in any way that does not include restarting the PC?I don't really have high hopes for this or anything, it's just that if there is a way I think it would be interesting enough for me to want to know
View 8 Replies View RelatedI've been trying to resize my root partition with gparted. I resize a ntfs partition to get more freespace available and I got 30GB of freespace and when I try to resize my root partition (unmounted) I can't do it, it's like I don't have any freespace.
View 6 Replies View RelatedI just installed ubuntu on my laptop and I was recommended to create separate partitions for root, home and swap. I was told that 15GB would be enough for a root partition but I am actually running out of that space very quickly after installing a few programs.
I wanted to resize it so I loaded up my live cd with Gparted and It won't let me resize it by more than 1MB. I also have at least 30GB of unallocated space on my hard drive so I don't know why I can't use it.
Here's some screenshots of GParted:
I installed linux on my system and made a dual boot system with Windows 7. But, I realize that my Windows system demands more hardisk space at this time (I planned to have just linux installation in my laptop after graduation, because some of my academic task still needs Windows platform). So I want to squeeze up my linux partition to be smaller. Currently my partition table is
How do I resize my linux root partition? I don't want to try erasing my linux partition, cos I will start everything over and I just don't have that enough time. And I know it will erase the boot loader, then I have to recover the MBR that is still looking so risky for me.
I recently installed Lenny and used the "Guided - Use Entire Disk" option.I made separate partitions for root, /etc, /var, /home, /usr and swap.I trusted that the auto partitioner would choose sensible sizes but possibly that was a bad move, root is only 340Mb and is full.
View 8 Replies View RelatedDuring install process I assigned only 6GB for my root partition and now I'm almost running out of space. I have 11.1 installed and I wanted to update to 11.3 but there are problems with i855 video card with newest distro versions so I won't install it. Since everything is installed and configured I don't want to install 11.1 again.
View 6 Replies View RelatedI took some videos off a usb flash drive, then went and selected " safely remove usb" and the light continued to blink on the flashdrive, I pulled it out any way, and the root folder turned red... everything seems ok, but how do you know when it's ok to safely remove a usb devise ?
View 3 Replies View RelatedWhen I load the disk I can view my backup drive properly but when I try to view my working drive it shows it as being empty. I also noticed that I had a 1 mg unallocated partition at the beginning followed by my ubuntu partition.
I then ran gparted in terminal and it did show the partition as having my system on it but I am not able to perform any tasks. No moving or resizing.
I have a flash drive that I want to mount as my root filesystem at boot time. When I'm in linux, I can run `mount /dev/sda1 /mnt`, and the kernel will mount the ext3 FS on the flash drive at /mnt with no problems. From this I assumed I could boot my system with the kernel option 'root=/dev/sda1', but this doesn't work. My kernel has no initrd, and is booted directly by a bootloader. It has no modules, so I know that's not the issue.
The current setup that works consists of a ramdisk that the bootloader loads into RAM before booting the kernel. The kernel detects this ramdisk and the current kernel root option ('root=/dev/ram') mounts the ramdisk as the root fs with no problems.I can see where the kernel detects the flash driveat startup, and I can't think of a reason why I couldn't just mount it as root. I can copy/paste startup logs here if necessary.
I have a partition, which is 32GB and is mounted to / of the archlinux distribution.I want to create another partition, I need about 5GB and I want to take them from this partition.If I use parted to resize the partition will I lose any files?
View 5 Replies View RelatedI am installing Debian on my netbook. I need to make a single fat32 partition on my usb flash drive. I really love linux and want it on my netbook.
View 4 Replies View RelatedI need to resize a NTFS partition in a disk for which I have an image (dumped with dd).
I mounted it through the loop device on linux:
# losetup -o 32256 /dev/loop0 disk.img # I got the offset from looking at fdisk's output
# mount /tmp/t /dev/loop0
# ls /tmp/t
[content of NTFS partition shows correctly]
# umount /tmp/t
# gparted /dev/loop0
gparted shows me the disk correctly; it just contains one large NTFS partition I want to shrink.
I have it had it running for one hour now.
Question: will this work? There is lots of disk access but the timestamp and size of the underlying file disk.img remain unchanged.
I want to increase the size of my Linux partition (yellow and highlighted in image), which is situated in an extended partition, along with my biggest partition.
When I try to select the options from any partitioning software (EASUS, Paragon, Gparted) the option to resize is not available (or can't enlarge).
For example in the Paragon Hard Disk Manager, I can't add free space before the partition, even if I first shrink the "G:" partition, then try to enlarge the one with Linux.
Do you know what's happening here? Why am I not allowed to resize the partition?
OS: LINUX RHEL5
I want to resize the partition
for example..
my
/u01 is 50 gb.
/u02 is 30 gb.
i need to risize /u02 to 100gb( i have space left of around 60 gb and I need to take 10gb from /u01)
I'm trying to resize a partition from a command line using the instructions on this page:
[URL]
The line below is the one I can't get to work right.
Quote:
Now, using fdisk, we must resize hda1 to 6000M, and create a new partition. Command: "fdisk /dev/had".In our case, the fdisk commands are "p d n p 1 1 +6000M t 7 a 1 n p 2 enter enter w", resulting in this "fdisk -l /dev/had" output :
I've made this work before but I cheated by using Acronis to create the partitions. I really want to get it to work from command line.
Unable to resize fedora 12 lvm parition with gparted. Need to resize to make room for ubuntu linux on same drive. When the fedora lvm parition is selected gparted says "No lvm support at this time". I am using gparted through the pmagic (partedmagic) linux boot disk. I have almost the lastest pmagic (5.7) there is a pmagic 5.8 on source forge.
View 2 Replies View RelatedI created a bootable Debian installer on my USB flash drive. The Debian Installation Guide advises;
The hybrid image on the stick does not occupy all the storage space, so it may be worth considering using the free space to hold firmware files or packages or any other files of your choice. This could be useful if you have only one stick or just want to keep everything you need on one device. Create a second, FAT partition on the stick, mount the partition and copy or unpack the firmware onto it.
I want to put non free firmware packages on the stick but when I try to create a FAT partition in the free space using Disk Utility I get the following error;
Error creating partition: helper exited with exit code 1: In part_add_partition: device_file=/dev/sdb, start=661837824, size=7507093504, type=
Entering MS-DOS parser (offset=0, size=8168931328)
MSDOS_MAGIC found
looking at part 0 (offset 0, size 657457152, type 0x00)
new part entry
[Code] ....
I formatted the drive to clear it, created a new FAT partition and copied the Debian.iso to it again. When I tried again to create a partition in the free space the same error occurred.
i am running ubuntu 10.10 and windows7 on a asus eee 1015. currently i have two partitions: 80GB for windows (NTFS) and 160Gb for Ubuntu (ext4).
I want to:
- shrink the windows partition (easy, no worries);
- Shrink the ubuntu partition
- join the space thus created in a third partition that i can use for storage, media etc accessible by both windows and ubuntu
The problem:
- i could not manage to get gparted live to run off USB stick (i get the unable to find medium.... error)
- even if i would get gparted to work and i succeed in shrinking the ubuntu partition as well, the two spaces reclaimed will be divided by the ubuntu partition, which means they cannot be joined in a third partition.
so here is what i want to do:
- shrink windows and create a new partition;
- format this new partition as ext4;
- somehow "clone" the data on my current ubuntu root into the new partition;
- format the current root as NTFS and use it as the storage partition
i am aware this may mean i would have to re-set grub etc but would the cloning of the partition be possible? that i would need to clone data from a 160G partition into a 40G partition.
BY THE WAY - forgot to mention that i have tried to load clonezilla off an USB drive and i get the same error: "unable to find medium..."
I didn't know a resize operation on a 750 GB disk was going to take 40+ hours, and I was biting my nails the whole time, until the power went out when "only" 8 hours where left.I can still mount the partition, and many of the files are still there, but some files show as '? ? ? ? ? filename.ext' with ls -l.If I try to go inside such a directory: Input/output error.
View 1 Replies View RelatedI have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
I am trying to install an ARM version of Ubuntu onto an SD card for a BeagleBoard from a .img file downloaded from http://releases.ubuntu.com/lucid/. I have tried several files of .img and .raw downloaded from several places. I am using 'dd' on a PC running Ubuntu 10.0.4. My question doesn't relate to the BeagleBoard at all since I never get that far. The files for Angstrom that I copy directly onto a formatted SD card boot up fine on the BeagleBoard, but I need Ubuntu on there and can't do it with these image files. The command I use is:
sudo dd if=<the downloaded file> of=/dev/sdb1 After it asks the root password, it chugs along for some time and then gives what appears to be a successful response like the following. (This time it was for the Maverick version of Ubuntu in a .raw file):
leiphasw@dell-linux:~/Downloads/ArmMaverickUbuntu$ sudo dd if=maverick-preinstalled-netbook-armel+omap.raw of=/dev/sdb1
4090632+0 records in
4090632+0 records out
2094403584 bytes (2.1 GB) copied, 167.38 s, 12.5 MB/s
[Code]...
USB flash disk partition disappeared as well as partition table I'm not sure about the cause
Code:
root@u# less /var/log/syslog
usb 5-1: New USB device found, idVendor=058f, idProduct=1234
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[code]....
Where did the partition table go? The device had one ext3 partition something around 4GB(size of USB storage device). I need to restore few files from this device.
I recently installed Fedora 13 on an 80 gigabyte hard drive, and it split the space in two, giving root and the normal partition both 36 gigabytes. I need at least 60 gig or more for my home partition. What can I do to shrink the root one? I currently do not have accsess to the install media or a rescue disk.
View 4 Replies View RelatedI tried two times to make an new partition (after the FAT partition on it) on my external hard drive with YaST>Partitioner.Fist I had tried ext3 now I have ext2 on it.Both times the partition (or the corresponding folder in /media) was only writeable to the superuser/root but not to a normal user (readable to the normal user). Root is the owner.The FAT-Partition on the same external drive is owned by the normal user who was logged in as I plugged the USB-cable in.I can unmount both partitions als normal user in natilus.1. Can I start nautilus as root to change the permissions?2. What have I done wrong? Should I use an SuSE Live-CD or an CD with an special partitioning-program instead?ng X20) openSuse 11.1 and Gnome 2.24.1 (mostly, 1 account is using KDE) and Kernel Linux 2.6.27.45-01.1-pae. "/home" is on an separated partition (as part of an extended partition). I have also 2 NTFS partitions for Windows XP (System and Data), and a FAT, a root (/) and a swarp partition.
View 9 Replies View RelatedUbuntu 10.04.1 to prepare a USB flash drive for use as installation media for a new computer that's on the way. When the Linux kernel tries booting up on the flash drive, I get an error saying VFS: Cannot open root device "<NULL>" or unknown-block(8,1).Here's how I got to this point...Created bootable partition on the thumb drive.Put the following files onto the flash drive: initrd.gz, vmlinuz, and ubuntu-10.04.1-server-amd64.iso fromhttp://archive.ubuntu.com/ubuntu/dis...ages/hd-media/Install Grub2 to the drive via grub-install.Put the following into boot/grub/grub.cfg:
Code:
set timeout=120
set default=0
[code]....
