I have a .wav file (a drum beat) that I want to use to play along with. The problem I am encountering is that I can't get either VLC or Windows Media Player (both on Windows 7) to play the file in repeat mode gaplessly, which makes it useless since it's a drum beat and it needs to be precise.
Is there some program on either Windows 7 or linux that you know can do this?
i'm running 11.04 64-bit and windows 7 dualboot. yesterday, i tried to merge some of my partitions using windows disk management and it didn't work. which was fine, but i had to reinstall and reupdate to grub 2.0 which i found out is a known problem if you mess with partitions in windows.everything is working fine in 11.04 now, except that my gapless playback in banshee is not working. there's now a little gap between every song. is this a hard drive problem? is there a way to fix it?
View 3 Replies View RelatedDebian 5.0
Totem Movie Player 2.22.2
Totem can play .flv file download on Internet. However it can't repeat playing. At end of playing the .flv file following warning popup, disregarding [Repeat Mode] check or uncheck
Code:
An error occurred
internal data stream error
[OK]
After clicking [OK] and the starting icon [triangle] I can replay .flv file.
Does setxkbmap configure keyboard repeat speed and delay time? If not, how do I configure it? Unfortunaly Google
View 2 Replies View RelatedIs there some way of getting plane wave basis set on gamess or gaussian. If not suggest a software with this facility.
View 1 Replies View RelatedI installed 8.04 ubuntu on my Dell Inspiron 9400 laptop. I upgraded it to 10.04. My screen now has a terrible wave on it when I scroll up or down.
View 3 Replies View RelatedI am new to Minix. I'm so impressed by the speed of the system. It looks elegant, I like it. However, I have a question about the shell. In Linux, while using a shell, up and down arrow keys can be used to navigate through previously executed commands. On Minix with the sh shell, I can only get numbers printed out on the screen. I remember I chose a US-std keyboard when installing. Is there any way to use the arrow keys to navigate through previous commands on Minix?
View 1 Replies View RelatedIs there any way to make Ubuntu play sound like Windows 7? I mean when i, for example, listen to music in Windows 7 the sound is much clearer and besides that i can use room correction to obtain a better surround feeling, but when i listen to music in Ubuntu the sound is not very clear and it sounds like stereo even though the sound is played back through all the speakers (the bass is also a little bit to high).
So far i've tried installing the alsa driver and modifying the output levels of each channel, but didn't quite have the same result as the room correction feature in Windows, and the sound wasn't any clearer either. Note: I have an onboard Realtek soundcard and Logitech x530 speakers
Although I am an obsessed Ubuntu user, I am also a realist. When I have to give a presentation, I often have to use someone else's computer, and that system invariably runs windows. So when presenting via Powerpoint with embedded video on a default windows install, I need to be certain that the video format will play correctly. It is hard to convince windows users that Ubuntu is better if your videos/slides/documents etc don't play nice with their setups.
I have used kdenlive before (on OpenSuse) and it has a wmv export profile which works, but I was really hoping to sort this out using Ubuntu.
export settings or profiles in OpenShot that will definitely work for me??
I know that Openoffice Impress on Ubuntu plays every format I've ever tried flawlessly -- but when you give a talk somewhere you are often using someone else's computer and it is usually windows
XMMS2, with the crossfade plugin will play gapless...assuming it will play at all. Sometimes I can get it to work when I end pulseaudio, and sometimes not. And now it's just not working at all. Audacious has a crossfade plugin that I'm informed works with gapless...but as soon as I install the plugin, audacious just stops working. MOC claims to have gapless support, but now that I've (supposedly) successfully installed it, I am buggered if I can find it on my computer.
Guayadeque, which I found out about in the last ten minutes, is said to work with gapless, but having followed the detailed instructions on how to install it, I cannot get it to install. I keep getting some crap about "wxWidgets not found" Rhythmbox is claimed to have gapless support. It doesn't. Exaile is supposed to have some kind of gapless/crossfade thing, but it doesn't seem to do anything at all.
Aqualung will do gapless, and at a pinch I'll use it, but if I want to skip to the next track or adjust the volume, at least fifteen seconds will elapse between me telling it to do something, and it doing what it's bloody well told!
using K3b to burn at the moment, is there any burning software that can convert mp3 format & burn at the same time like nero, if not what is the best converting software mp3 to wave file. ubuntu 10.4
View 2 Replies View RelatedUnder System > Preferences > Keyboard Preferences there is an option to en/dis able "Key presses repeat when key is held down".
Is there by chance a command to en/disable this option? (edit: meaning a terminal, or 'run application' type command)
Seems a little far-fetched, but for how often I toggle this..
Keyboard repeat doesn't seem to work correctly on my system (Xubuntu, 9.10). Holding a key down ends in the repeat function stopping after a certain point, and at different times each time. Also, editing text fields is tricky because the field currently highlighted reverts to its previous value if I don't hit enter fast enough (I have to type new values into a notepad and copy and paste it quickly into the field).
View 2 Replies View RelatedI searched the forum but could not find anything to solve my problem. I installed Ubuntu via Wubi.exe from windows first time, before deciding to completely format and start with a Linux Ubuntu clean install (64-bit). When I installed it with Wubi.exe, I simply plugged in my Wave and it connected to the internet...no fuss!
Problem is, after clean installing Ubuntu, the same does not happen. I cant connect to mobile broadband. It is worth mentioning that this is my only internet connection available (mobile broadband) and I am thus unable to update, get necessary repositories from Linux etc.
I read something about usb_modeswitch being involved, manually did that, but I still cannot connect to the mobile broadband. Mobile broadband is enabled when I right-click the connections too. I set up the connection for CellC, removed the "Cellcis" username, added it and more, but it still does not connect.
Can anybody give me some pointer on how to go about fixing this connection, because as you can imagine, my Linux install is pretty useless without internet.
I tried to google, but didn't find any solid information on this. Is this supported yet?
View 2 Replies View RelatedI am trying to modify the sample program pcm.c(which generates a sine wave) from the alsa website to produce a square wave.Square wave = sign(sinusoidal wave)So then why isn't the following code creating a square wave:
Code:
int sgn(double d){
if (d>=0) d=1;
[code]....
When I boot the linux kernel 2.6 , I was kicked out and request to run fsck manually. After running fsck -y /dev/vg00/lvol3 and /dev/vg00/lvol4 and reboot, I still get the same error and request me to run fsck . I attach the console output in here .
View 4 Replies View RelatedWhen I go to boot up, I ususally have a failedattempt or two at logging in, because my autorepeat rate on the keyboard will often give me morethan one character when I depress a key. SoI put my password in wrong and get a failed attempt.After I log in I usually run:kbdrate -r 6 -d 500This gets my autorepeat rate down to 6 char per secondand delay time to 500 to where I can actually use the keyboard. Is there some place I can run those commands duringboot, so that I don't have the failed and repeated
View 3 Replies View RelatedSome Flash games don't work very well on Linux because when you hold down a key (such as one of the cursor keys) the Flash player sends the game multiple KeyDown and KeyUp events, leaving the game unable to tell the difference between a user holding a key or a user tapping a key quickly. (On other platforms it seems that typematic repeat generates multiple KeyDown events but not KeyUp events.)
Anyway, to work around this problem, I go to System->Preferences->Keyboard and disable "Key presses repeat when key is held down" when I want to play a Flash game, then put it back afterwards. I do this often enough that I'd like to set up some shortcut keys to change the setting. I figured out the following commands to turn it off and on again:
gconftool-2 --set /desktop/gnome/peripherals/keyboard/repeat --type bool false
gconftool-2 --set /desktop/gnome/peripherals/keyboard/repeat --type bool true
My problem is that when I have tried entering these on the command-line (in a gnome-terminal), X-windows seems to get confused and behaves as though I'm holding down the enter key. It doesn't stop if I press enter again. I tried pressing ctrl-alt-f1 to switch to a text console and it worked fine, but when I pressed ctrl-alt-f7 to go back to X it still behaved as though I was holding down enter. I had to press ctrl-alt-backspace to reset X before it would return to normal. I *think* it happens in particular when changing the setting from true to false. I'm running Karmic Koala with all the updates.
I have been trying to repeat the first two rows in a Calc document but I keep getting an error.
Here are the instructions that I used.
Printing Rows or Columns on Every Page If you have a sheet that is so large that it will be printed multiple pages, you can set up rows or columns to repeat on each printed page. As an example, If you want to print the top two rows of the sheet as well as the first column (A)on all pages, do the following:
1.Choose Format - Print Ranges - Edit. The Edit Print Ranges dialog appears.
2.Click the icon at the far right of the Rows to repeat area. The dialog shrinks so that you can see more of the sheet.
3.Select the first two rows and, for this example, click cell A1 and drag to A2.
In the shrunk dialog you will see $1:$2. Rows 1 and 2 are now rows to repeat.
4.Click the icon at the far right of the Rows to repeat area. The dialog is restored again.
5.If you also want column A as a column to repeat, click the icon at the far right of the Columns to repeat area.
6.Click column A (not in the column header).
7.Click the icon again at the far right of the Columns to repeat area.
Rows to repeat are rows from the sheet. You can define headers and footers to be printed on each print page independently of this in Format - Page.
And here is the error.
"invalid sheet reference"
I have a wav file bigger than 8GB. i recorded it on a windows PC. unfortunately wav files cant be bigger than 2GB. somehow i got a file that is almost 9GB. I tried to chop the file under ubuntu into smaller pieces to open it part by part. i used gnome split to divide the file and made 10 parts out of it. now i have these parts of the data which i cant read with no program except for gnome split to merge them together again - which would only bring me to the beginning of my problem. so my question is: is there any other way to open/ split&open a wav file of that size or maybe a way to open the splitted file partially?
View 3 Replies View Relatedin gnome 3 I can't change my keyboard settings which define how fast a key get's repeated, if you keep it pressed. Screenshot is attached, unfortunately only in german.
edit://In addition prior to gnome 3 I was able to change the keyboard "handler" (I have a Logitech G110 with macro-keys and I was able to let g15macro handle them) which I am not any more. Why?
I just bought a new hdd for my pc and reinstalled opensuse 11.2 Updated to amarok 2.2.1 and now i have a problem, my menu doesn't contain playback-->repeat/random options, they simply aren't there. amarok doesn't allow to play repeat and random simultaneously.
My problem is that i want to launch amarok with random playback....could this be done with some parameter through the terminal...(e.g amarok --playback-random)?
And ifanyone could say why I don't have certain menu items in amarok I would also be grateful. I think it is not related to the packman repo because i have the suse version of amarok.
need to modify some scripts to repeat the commands in them until a variable returns a proper value. I need it to add some redundancy to some scripts i use to upload files to a remote server.This is an example of a portion of those scripts:
Code:
################## site UPLOAD ##################
site_login=$(curl -c $site_cookie -L -F user=$site_user -F pass=$site_password -F
[code]....
Any-one using the Linux version of Click-Repair? [URL] I have been trying Gnome Wave Cleaner but no matter how I configure it there is unacceptable deterioration of audio quality when used in any auto modes. In the past I have trialled Wave Repair and found it acceptable though they have no Linux version. [URL]
Can I expect an improvement over GWC using Click-Repair ? for the outlay of some $$$, or is GWC the best I can hope for using Ubuntu. Or, is it back to the tedious 'manual de-click' for every LP.
Is there is anyone who owns a wave keyboard who has had any problem with the media keys or regular keys please tell me. I found somethreads about problems with the media key, but I could not fine any recent ones.
View 9 Replies View Relatedpast few weeks i have been getting shock wave flash crashes in Chromium 10.0.648.133 (77742) Ubuntu 10.10,Now it crashes constantly, Ive tried reinstall of flash-and updates
View 5 Replies View RelatedI've got Ubuntu 9.04 Jaunty Jackalope. How may I install and configure a DLNA server on this laptop to share music, photos, and videos, with my Samsung Wave S8500 mobile
View 5 Replies View RelatedSituation is a cable modem and a Belkin F5D8235 Wireless-N router (and a computer) are at one end of the property. Approx 150-200 ft away I want to put 3 desktop computers none of which have a wireless card or device. I DO have a Linksys WRT54G I'm not using.I want to hardwire the 3 desktop computers to a switch that is hard wired to the Linksys. Putting a wireless card in one of the 3 computers is not practical because of physical obstructions (a lot of cabinetry, furniture, walls) that the Linksys (which can be at the window) would not have to deal with.
Is it possible for the Linksys to 'receive' the wireless signal from the Belkin so the 3 desktops can share the internet? If not, what could I put in the window to 'receive' or 'repeat' the wireless signal?I know this isn't exactly a Ubuntu question, except that 2 of the 3 computers are 64bit Lucid.
I'm looking for a simple media player that can loop/repeat a given section of a song; say from 2:55 to 3:20 if I wanted. This would be useful for guitar practice.
View 8 Replies View Related
