General :: RHEL 5 Support NTFS System?
Dec 14, 2010Any idea, does RHEL5 support NTFS system.??
View 6 Replies
ADVERTISEMENT
Fedora :: System Support NTFS Compression?
Oct 22, 2009I haven't seen this addressed anywhere & quite frankly a "google" wasn't any help. So I pose the question here.
If I, under M$, turn on the NTFS compression, will that drive still work under LINUX?
My thought is that it won't as I haven't seen any control in LINUX for it.
General :: Ntfs Parition Not Mounting At Startup / If Enabled Selinux In Rhel 5?
Feb 18, 2010i have dual OS in my hard disk. win xp and rhel5. i used use ntfs partition too while working in linux. There is no problem until i enable selinux. When i enabled that, its giving some error at startup and left the partition unmounted. But manually i can mount after logged in. But i need it at the startup itself. How to solve this.i am installed dkms* dkms-fuse* fuse* and fuse-ntfs-3g* rpms to use the ntfs partitions.
View 4 Replies View RelatedDebian :: EXFAT Support Vs NTFS Support ?
Aug 25, 2010I'm looking to dual-boot Windows 7 and Debian 6 upon its release on my sister's laptop. I want to share a partition between the two of them so that /home points to this directory and the Windows equivalent also points to it (C:Users).
Anyway, I've heard good and bad things about the NTFSMount driver (I think it's NTFS-3G now) and the NTFSprogs project and so I am not so certain what I should believe. I do know that NTFS has relatively high overhead, though I do not recall the source of this assertion, so I am considering the use of EXFAT. An open source EXFAT project is hosted on Google Code at [url] and it utilizes the kernel module FUSE.
I'm quite certain that I've got everything covered on the Windows side -- that is, I know that both NTFS and EXFAT will be suitable filesystems for my required usage.
My issue is that I'm curious which will have superior performance and stability in Debian. I planned on building the package from source and mounting the device in my FSTAB but I have also found a PPA for Ubuntu on Launchpad at [url] that I could borrow the debian/rules from and make a .deb package from.
What do you guys think? Should I go at it with the EXFAT or NTFS partitioning? Is NTFS-3G actually fairly supported at this point? Or perhaps should I consider some alternate method?
I have also considered that the only files she will be sharing are those of music, videos, and pictures so it could be better to just link /home/xxxx/Pictures (Music and Videos, too) to the new partition instead of all of /home.
General :: How To Install Latest Flash On RHEL 5.3 To Support Chromium Browser
Jun 9, 2011I've installed chromium on Linux from a custom binary on the net. When I try to get to gmail or any other site that uses flash, chromium warns me that the version of flash that is shipped with the browser is stale and that I should be using the latest version and pointing to an adobe site.the adobe site gives me 3 options
1) yum
2) RPM
3) tar.gz
4) APT for ubuntu
since I'm on redhat, I can use either yum or RPM.Which one should I use and what is the command to install it so that chromium can use it.
General :: Is There System Admin Tool For RHEL On Montioring And Logging System Memory
Apr 20, 2011Is there a system admin tool for RHEL on montioring and logging system memory used and released that can dump to a log file?I'm having an issue with memory not being released when an application is closed. I need to have a tool monitor and log so I can troubleshoot to verify that it's an application not the OS.
View 2 Replies View RelatedGeneral :: Files (system & User) Created After Login To System In RHEL 5.0?
Jun 4, 2010How to find, what are the files (system & user) created after login to the system in RHEL 5.0?
Any single command available?
Software :: How To Mount NTFS Partion In RHEL 5
Apr 2, 2010Mine is dual bootable system i686 (Visa and RHEL 5). I have important data on VISA which is NTFS. I would like to access the NTFS drives from Linux RHEL 5.
I have downloaded and installed the fuse-2.7.3-1.el5.rf.i386 and fuse-ntfs-3g-1.2301-1.el5.rf.i386 rpms from dag.wieers.com but when i run the mount command which is mount -t ntfs-3g /dev/hda5 /mnt/wing it is showing the error message ----------------------------------------- FATAL: module fuse not found...
I have to use RHEL 5 only.
General :: Can't Run Another App With Other RHEL 4 System User / Get It?
Apr 13, 2011I'm Pab, just like to know, How can I allow a new user to run specific software like sqlplus.
Scenario:
I have an oradb@database user where i can execute sqlplus /nolog command, but when i created a new user named allan@database the bash says....-bash:sqlplus: command not found.
Server :: RHEL 5.1 Support For MSA 2324FC
May 25, 2010i m using rhel 5.1 and i need to configure MSA 2324fc. i want to enable MSA for storage. the multipath that comes with rhel 5.1, i think dont have support for MSA 2324fc. I need to know HP DM multipath software version to use with 5.1 which will support MSA 2324fc.
View 1 Replies View RelatedRed Hat :: RHEL 5.5, Monitor Does Not Support Display?
Aug 14, 2010I am using linux from last three month.
View 1 Replies View RelatedRed Hat :: Mount NTFS Partition On RHEL 5 Dualboot With Vista ?
Aug 6, 2009I have RHEL 5 dualboot with Win Vista. I want to mount ntfs partitions on linux. So please tell me one easy way.
I have tried to load ntfs.ko module in /lib/modules by #modprobe by it return with module not found
Red Hat / Fedora :: Autodesk Support When Using Centos Instead Of RHEL
Jun 23, 2010So as the title says, I am looking for your experiences in this issue, because CentOs and RHEL are very, VERY similar, it is basically the same, so I was wondering, if I can get official support from Autodesk if I'll use their software on CentOs instead on RHEL.
View 2 Replies View RelatedGeneral :: Access NTFS In System?
Jul 4, 2010How can I access NTFS in linux?
My distribution is centos 5.5.
Red Hat / Fedora :: Automount LUKS Encrypted NTFS USB Disk In RHEL 5.3
Dec 23, 2009I have an external 300GB (Toshiba) disk which I encrypted (using cryptsetup luksFormat) and then installed an NTFS filesystem on (need to be able to use it in both Linux and Windows - using FreeOTFE). The disk mounts fine in windows and on my Fedora 10 system it automounts.
I can manually mount it on the RHEL5.3 system, and gnome-mount gets as far as recognising that it is encrypted and asking for the key, but it doesn't then mount it - I then have to manually mount the /dev/mapper/luks... device.
Does anyone know how to do this - if it works in Fedora 10 it ought to be possible to get it to work in EL5.3 I'd have thought.
General :: Can Install Suse And RHEL 5 On Same System - Laptop ?
May 1, 20111.Can I install Suse Linux and RHEL 5 on same system (Laptop)?
How many OS can I install in one laptop?
My laptop name in Compaq Presario CQ42-462TU i5 M460 2.53GHz 3GB RAM 320GB Hard Disk
2. Can I install 64bit RHEL 6 and 32 bit RHEL 5.5 on same laptop?
I have RHEL 6 installed on my laptop, but when I try to install Suse Linux after hitting installtion button it starts loading lernel but then it blacks out and stays there for years.
It also shows some ACPI error when I tried to install second LINUX OS .
3.What should I do? Should I change my newly brought laptop?
General :: Ethernet Card Is Not Detected On System RHEL 5.1?
Jun 21, 2010I install RHEL 5.1 on my system. But my Ethernet card is not detected. I found my Ethernet card is of "ATTANSIC Technology corp L1 Gigabit Ethernet Adapter(rev b0). I already downloaded the driver. Someone tell me step by step process, how to install this driver over RHEL 5.1.
View 2 Replies View RelatedGeneral :: Cannot Access USB Ntfs File System
Feb 1, 2010I have reinstalled my centOS linux in my laptop.
I have installed ntfs-3g by yum install fuse fuse-ntfs-3g recommended from :[url]
I have mount it to my window ntfs system and setup
Now I am able to access window ntfs system.
HOWEVER, I could not access to USB NTFS system. May I know why?
It gave me: The volumn "Expansion Drive" uses the ntfs file system which is not supported by your system
The USB drive is FreeAgent (500G). I have partitioned it to 3 parts. 1 part is ntfs. The other two is ext3. I can access ext3 smoothly.
General :: Possible To Format System Drive As NTFS?
Feb 2, 2010Is it possible to format a Fat32 Ubuntu system drive to ntfs leaving the program and data undisturbed? I created a gparted liveCD and used it to format a slave drive to ntfs. It worked perfectly. Can the gparted liveCD be used on the master drive similarly without destroying the existing files on it?
AMD 1700 2.66ghz, 1gb memory, 80gb HDD plus 60gb HDD, Nvidia TNT2 AGP Video, DVD +/-RW, running Ubuntu Intrepid Ibex 8.10 Standard Desktop installation
General :: Mount Ntfs File System?
Feb 17, 2010how can i mount ntfs file system in linux
View 3 Replies View RelatedGeneral :: Mounting NTFS File System ?
Apr 25, 2011I have Debian Squeeze installed. I have 3 different HDDs, one of them is SATA, the other 2 are IDE, on one of which I have the distro installed.
How do I mount the other 2 partitions? I see them in "Places" but when I click on them I get an error message "Unable to Mount <The name of the volume> Can not get volume.fstype.alternative".
I can see both volumes in /dev/ntfs. I tried doing
Code:
Ubuntu Networking :: DD-WRT / Tomato 2.4 NTFS Support?
Dec 10, 2010i can't quite figure it out for myself. does ASUS WL-520gU Wireless Router with DD-WRT/Tomato 2.4 kernal support ntfs on its usb?I would like to share out my NTFS external HDD from that router.
View 1 Replies View RelatedGeneral :: How To Find The /dev/Device Mapping For NFS File System In RHEL
Jun 19, 2010Found the below from RedHat Knowledgebase
The Completely Fair Queuing (cfq) scheduler in Red Hat Enterprise Linux 5appears to have worse I/O read performance than in version 4. It appears as though the Completely Fair Queuing I/O scheduler (cfq) has a regression and thus exhibits reduced read-side throughput which can affect performance for both local and NFS mounted file systems.
One way to mitigate this is to set the cfq's slice_idle parameter to zero. To change this value, execute the following command echo 0 > slice_idle in the /sys/block directory appropriate for your situation, as shown below:
echo 0 > /sys/block/hda/queue/iosched/slice_idle
We are using NFS file systems in RHEL 5.3. I would like to know how to find which /dev/Device is being used by the NFS file systems, so that I could try setting the slice_idle to '0' to see if there is any difference in performance? In /etc/fstab I only see the actual NAS volumes for the NFS file systems.
General :: Full System Backup From Ext To NTFS Disk
Oct 11, 2010I wonder if I can backup files from an ext partition to a ntfs partition and keeping all kind of metadata and file infos?!
With other words:
Can I backup a full linux system from a ext file system to a external ntfs partitioned disk using rsync -a (keeping all file permissions)?
Is something getting lost of a file (like permissions or anything... flags...) when copied / rsynced from ext to ntfs?
The thing is, that when I restore the stuff back from ntfs to ext, can I still use my system properly?
And can I backup files like photos from ext to ntfs without loosing any meta data?
Or asked more in general: What is the difference of a file on a ext partition compared to the same file on a ntfs partition?
General :: Make A File System Like Ntfs Like RHEL5.0 ?
Apr 7, 2010How to make a file system like ntfs in linux like RHEL5.0 ?
View 3 Replies View RelatedGeneral :: How To See My Ntfs Partitions - Windows - Into Redhat Operating System
Apr 18, 2010Actually i've packages to show my ntfs partitions on my red hat linux but i 'm unable to install these packages. how can i install the packages
View 2 Replies View RelatedGeneral :: Add Sandy Bridge Support To System Kernel 2.6.32.20?
Jul 19, 2011I want to add Sandy bridge support to linux 2.6.32.20.I have linux kernel 2.6.32.20 ,and Sandy bridge changes were added from kernel 2.6.33.4.Please can anyone suggest how to backport the kernel support for Sandy bridge.
View 2 Replies View RelatedGeneral :: Restore Files From An Ext3 File System Formatted With NTFS?
Oct 1, 2009There were some files residing on my ext3 file system, using Ubuntu as my linux distribution. Yesterday I formatted the hard drive using a windows install CD, rewriting it with a new NTFS partition. I'm willing to restore my personal files deleted due to this format.
View 3 Replies View RelatedGeneral :: Mount NTFS Partition Deeper In File System With Fstab?
Mar 15, 2010I'm dual booting with Windows 7 and would like to have my windows 7 user folder mount when I boot.
After some looking around I edited /etc/fstab to add the following line:
This works. But it mounts the windows partition from the root level. I'd like to just mount C:UsersFHSM (/Users/FSHM) to /mnt/windows.
I'm trying to get it so that when I click on the windows drive I get my windows user folder instead of having to click through from C: to get to it.
I'm the only user on this system but if I created a second windows user would my home folder mount for that person too or does setting the user ID prevent that from happening?
General :: Why Doesn't TrueCrypt Support System Encryption On Non-Windows Machines
May 16, 2011I would love to be able to use TrueCrypt consistently across all my machines, be they Windows or Linux. As it stands, I can do full-disk encryption with pre-boot authentication only on Windows.
I don't really understand why this is. Are there technical challenges specific to Linux/Mac that make full disk encryption harder? Does anyone know whether TrueCrypt will support this in the near future.
PS. yes, I'm aware that there are other options. My goal is to simplify my life here and use the one tool across all machines.