Server :: RHEL 5.1 Support For MSA 2324FC
May 25, 2010
i m using rhel 5.1 and i need to configure MSA 2324fc. i want to enable MSA for storage. the multipath that comes with rhel 5.1, i think dont have support for MSA 2324fc. I need to know HP DM multipath software version to use with 5.1 which will support MSA 2324fc.
View 1 Replies
ADVERTISEMENT
Aug 14, 2010
I am using linux from last three month.
View 1 Replies
View Related
Jun 23, 2010
So as the title says, I am looking for your experiences in this issue, because CentOs and RHEL are very, VERY similar, it is basically the same, so I was wondering, if I can get official support from Autodesk if I'll use their software on CentOs instead on RHEL.
View 2 Replies
View Related
Dec 14, 2010
Any idea, does RHEL5 support NTFS system.??
View 6 Replies
View Related
Mar 2, 2011
is possible to edited the default RHEL CD to have it automatically install RHEL based off of a kickstart file that I will store locally on the CD. My plan would be to put a cd in a server and have the OS automatically being installed.
View 3 Replies
View Related
Feb 1, 2011
We are planning to migrate our LINUX server from RHEL 3to RHEL 5. What are the configuration difference between RHEL 3 to RHEL 5 for webserver installations?
View 1 Replies
View Related
Jun 9, 2011
I've installed chromium on Linux from a custom binary on the net. When I try to get to gmail or any other site that uses flash, chromium warns me that the version of flash that is shipped with the browser is stale and that I should be using the latest version and pointing to an adobe site.the adobe site gives me 3 options
1) yum
2) RPM
3) tar.gz
4) APT for ubuntu
since I'm on redhat, I can use either yum or RPM.Which one should I use and what is the command to install it so that chromium can use it.
View 1 Replies
View Related
Dec 14, 2010
what are the major differences between rhel 5.2 and rhel 5.4
View 2 Replies
View Related
Dec 9, 2009
I have a database server running RHEL 5.1 32 bit that suffered some catastrophic failures about 6 months ago. We were able to patch it back together and keep it running, but now the manufacturing site it supports is going to shut down for two weeks and I would like to replace it permenantly. Does anyone have any guidance for that sort of thing? I'd like to have the new server up and running before hand, basically changing the hostname/ip and restoring the databases only on conversion day. I've done this in the past with HP UX - Red Hat conversions, but this is my first red hat to red hat move. Any advice or shortcuts?I forgot to add the other wrinkle. The new server will be running 64bit linux.
View 1 Replies
View Related
Jul 10, 2011
I'm trying to find out when QME2572 (Qlogic) card became support by the kernel. We have a RHEL 5.1 system that is moving to new hardware, however the kernel at this release doesn't support the new hardware, due to the Qlogic card change. I tired the Redhat KB and Bugzilla. Is there a Kernel change list etc I can search. Never really played around with the kernel too much so I'm just after some pointers for looking up this information. Offically its not supported until Redhat 5.3, I'm trying trying to research kernel info so I can tell the customer they have to upgrade.
View 3 Replies
View Related
May 24, 2010
I am getting these error in RHEL 5.3 while i did "yum update".
---> Package libstdc++-devel.i386 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++-devel.x86_64 0:4.1.2-46.el5_4.2 set to be updated
---> Package libstdc++44-devel.i386 0:4.4.0-6.el5 set to be updated
[code]....
The program package-cleanup is found in the yum-utils package.
View 2 Replies
View Related
Oct 9, 2010
RHEL 5 is my proxy server. i want to remove temp files and cache . How do i remove cache and temp files.
View 3 Replies
View Related
Apr 11, 2010
I am trying to do a https access with virtual hosting with apache.
But when I install mod_ssl rpm httpd server does not start again
I am stumped
httpd -t shows syntax is OK
View 5 Replies
View Related
Aug 11, 2010
I cannot ssh into an RHEL 5.5 server (192.168.20.104) from another RHEL 5.5 server (192.168.20.101) unless server debug is turned on 192.168.20.104, and even then, I have to wait several minutes before the connection is established. scp to and from the 104 server is also not working.Here is the debug output on the 101 server when server debug is not enabled on the 104 server-:
Code:
[applmgr@tclg-clone-01 ~]$ ssh -vvv 192.168.20.104
OpenSSH_4.3p2, OpenSSL 0.9.8e-fips-rhel5 01 Jul 2008
[code]...
View 6 Replies
View Related
Jun 21, 2010
Having some issues setting up sendmail on a (basically) blank RHEL 5.5 server setup. My ultimate goal is to be able to automagically send logs / errors / notifications to ourselves from the server.
Our basic setup is a Win 2003 domain with exchange running on mail.domain.com.au.
I've edited the '/etc/mail/sendmail.mc' and added the :
Code:
line to it.
Also added the domain (domain.com.au) to the '/etc/mail/local-host-names' files
Also edited submit.mc and added
Code:
When I try and send a mail from root or a test user to one of the domain accounts, it seems to go fine, i.e no errors are reported but it never gets delivered.
From the mail logs:
Code:
So it seems to be sent to the queue no problems and when I check the queue :
Code:
Total requests: 0
Not nothing ever gets received. Am I missing something? I have read and read and read but dont seem to be getting any furthur.
So in the end this server doesn't need to do anything except be able to send mail from root to an external mail address.
View 1 Replies
View Related
Oct 29, 2010
In oreder to run an application software on RHEL 3 ES server, I created a link forcefully using following command from root id:
# cd /lib64/tls/
# ln -sf libc-2.3.4.so libc.so.6
before that I copied file libc-2.3.4.so from a workstation with OS RHEL 4 WS so that a link can be created.
Now I am unable to run any command except cd & pwd and it gives error messaage as given below:
ls:relocation error:/lib64/tls/libc.so.6:symbol _rtld_global_ro,version GLIBC_PRIVATE not defined in file ld-linux-x86-64.so.2with link time reference.
Before running this command libc.so.6 was pointing to libc-2.3.so file in path /lib64/libc-2.3.2.so.
I am now unable even to open a new window on the server.Please send me some solution as early as possible because this server is running production data and many users are runnig application on this server.
View 3 Replies
View Related
Mar 12, 2010
we are running a Red Hat Enterprise Linux ES release 3 (Taroon Upd 5) Kernel 2.4.21-32.ELsmp since several years. The server hosts an old ERP system who will be replaced at the end of the year.However it is necessary that some collegues are able to write some files to that server regulary. Since we are running Windows 7 on several machines, those users aren't anymore able to write to the samba share. Getting files from the share works fine.
But the problem seems not to be situated at the samba service because also the transfer using SSH (WINSCP) from any Win7 system to the server doesn't work.During testing we recogniced that transfering files smaller then 1kb works fine ... any file greater then 1kb ends up in an connection abort. This works with samba and also using SSH.All the workarounds editing some registry entries in Win7 for improving the interoperability between vista / win7 and samba don't work for us ... and also seem not to be the source of the problem.Is there a general known incompatibility between our RHEL version / kernel and Windows 7 regarding file transfers?
View 6 Replies
View Related
May 24, 2010
I have a RHEL 5 server with 32 bit architechture that is not recognizing more that 4 GB of RAM and I am trying to locate a version of the kernel-PAE package that will work well with the 2.6.18-53 kernel. I found something on Open VZ called ovzkernel-PAE that is built for the 2.6.18-53 kernel [URL]
and wanted to find out if there were any known issues with this release before I attempted to install it. Is anyone aware of any issues with any rpms on openvz.org or with this particular rpm in general?
View 1 Replies
View Related
Aug 16, 2011
I have a RedHat box that I have configured, security, audit rules, latest updates, etc. I want to be able to "image" that configuration so I can kick other boxes with that "image", that way no other configuration/updating needs to be done on the newly kicked boxes. What is the best way to accomplish this? To make things more difficult, it would be near to impossible for me to pull any software off the internet for this.
View 5 Replies
View Related
May 20, 2010
I am trying to look at installing the PAE module on a RHEL 5 2.6.18-53 system and I cannot seem to find that around. I had hoped to find out if installing the CentOS 5 2.6.18-128 or 2.6.18-164 kernel-PAE modules would have a lot of negative consequences? Perhaps one of you could direct me to a download site that would provide kernel-PAE for a 2.6.18-53 build?
View 4 Replies
View Related
Aug 5, 2009
I have seen and tried a lot of web information about issues with VNC and the RHEL 5.x implementation of VNC.
I can't seem to get the behavior I want. Let me explain.
With SLES 10, I can use YaST and with a few clicks end up with a system that when rebooted, accepts VNC viewer connections to :1 and displays the system login screen.
Here I can log in as root or any user. Once logged in, I can choose to use the command line to restart the system if necessary and eventually, I can reconnect with the vncviewer to the system login screen.
RHEL 5.2 has a "share your desktop" setting in preferences which works fine, but requires that I be logged in locally, which prevents remote restarts. There is also a system services dialog that refuses to start vncserver as a service. There are numerous tutorial in the RH knowledge base and the web that explain how to specifically setup individual displays, :1, :2 for specific users and claim that it can work after boot. I have not been able to get these working, but what I really want is a simpler, single display, :1, that will present the RHEL login screen so I can log in as any user I want. I am the only person accessing these servers and they are behind a firewall using secure protocols when remote.
I think Red Hat did not want to make this too easy as VNC users need to consider the security risks. Is there a way to get the SLES 10 VNC approach to work on RHEL 5?
View 5 Replies
View Related
Jul 21, 2010
I'm using java socket server program for transaction routing on rhel5. So I make a jar file of server to be run.
Now I need to add my application as a service. I just search in google how to do that, And i found some way and it is bellow,
#!/bin/bash
#
# chkconfig: 2345 85 15
# description: epic tle
# processname: epictle
[Code].....
I have written simple script (sh) to run jar file and I'm using bellow code for putting it as background
sh /opt/EpicTle/tle/run.sh >/root/.epicline/logs/debug/console.out 2>&1 &
I want to change 'console.out' file per day with date name rather than going with one file
View 6 Replies
View Related
Nov 25, 2010
I have a situation where I want to install various versions of RHEL on removable drive. My first option was a flash drive or an external USB hard disk, but its speed is too slow.Now I have been assigned a task to search for more options about this requirement. If anybody has experience in installing the same, then please share with me.
View 6 Replies
View Related
Dec 23, 2010
When I submit a job via lpr on RHEL 5 using lpr -P MYPRINTER filename and then do a lpstat -t, the actual file name is not listed...just a job identifier e.g MYPRINTER-8 On AIX the lpstat command shows the actual print file name Using -C, -J or -T options in lpr also makes no difference to waht is seen in lpstat
View 1 Replies
View Related
Mar 4, 2010
Currently my server use SAS 146G 10K. This hdd is in mirror mod. But space in current hdd is not enough. So, my plan is clone current hdd to other SAS 300G 10K.
View 1 Replies
View Related
Aug 3, 2010
I've my RHEL4u4 integrated with Active Directory.
I can logon to computer with username/passwd from AD.
But if I try to use ssh, is doesn't work
When I try to connect to the same computer using kerberos I receive this messages:
ssh -vv server.domain.com
....
debug1: Authentications that can continue: publickey,gssapi-with-mic,password
debug1: Next authentication method: gssapi-with-mic
debug2: we sent a gssapi-with-mic packet, wait for reply
[Code]....
and it tries to use publickey and finally, user/pass.
What do I've have do for using ssh and kerberos? I use samba for joining computer to AD. I tried it in ubuntu 8.04 and likewise-open and it works, but not in RH-Samba.
View 10 Replies
View Related
Jun 14, 2010
I have to investigate the technical benefits of using RHEL 5.5 instead of Fedora 8 on our servers. So any specific reasons with proper justification?
View 4 Replies
View Related
May 1, 2011
I downloaded the demo for RHEL Server 6. I'd like to get Xwindows going, but have been thwarted thus far. edit /etc/inittab file and change the value from 3 to 5. That didnt' work. There's an X11 directory with a file called 'prefdm' that has a bunch of code in it that I have no idea what it means. how to get X windows to start?
View 7 Replies
View Related
Mar 2, 2010
My current project environment setup is having a single server, running on RHEL 5.2, that is constantly receiving incoming data (video and text) over a periodic interval e.g. every 30 minutes. Initial in-house testing projected the server will be generally busy, so we decided to incorporate a second server for load balancing purposes. So now, server A and B will need to be clustered. Once that is done, incoming data will balance out between the two server (or at least that is what I will like to achieve. Note, I'm aware that at the switch side, I'll need to do some additional configuration and that part is covered).
I've been reading on Red Hat Cluster Suite and the Linux Virtual Server (LVS) seems the way to go. However, I noted that the LVS solution require at least a two-tier solution, and that would incur 3 additional servers instead of just 1. So here's my questions:- I looked around and probably know the answer, but I'm gonna ask anyway. Is there a one-tier solution for LVS i.e. have anyone tried or whether it's even feasible. From my reading, it don't seem so but just want another opinion. Is there any other way for me to do the clustering (for load-balancing) without LVS?
Sidenote: I'm currently looking at Ultra Monkey and will be trying out in a while. However, the project I'm doing would be rolled out to live site eventually, and my customer is kind of....particular. I'm just wondering if there's a software/application (that need to be purchased) and comes with support.
View 2 Replies
View Related
Aug 26, 2009
Does anyone have an UP TO DATE document, or know how to set up a standard RHEL 4.1.2... 64-bit box to be a YUM Proxy machine? I have found several manuals, all being dated a while ago.
View 7 Replies
View Related