General :: Possible To Install RPMs In Qemu?
Aug 28, 2010Can we install packacges/rpms for example in qemu?
View 2 RepliesCan we install packacges/rpms for example in qemu?
View 2 RepliesWhen I try this yum install kvm qemu libvirt python-virtinst qemu-kvm I become this error
Transaction Check Error: file /usr/share/man/man1/qemu-img.1.gz from install of qemu-img-0.10.5-1.el5.2.x86_64 conflicts with file from package kvm-qemu-img-83-164.el5_5.25.x86_64
how can I resolve this error
qemu-img , create any imagerun qemu -fda bootdiskwin98se.img -hda image.imgand No drive C what's going wrong with qemu-img/qemu?
View 3 Replies View RelatedI need to somehow do a yum installation (or equivalent of) on a system that is offline with no access to the internet. (I do have access to another Linux system that has internet access, but the Linux installations on both systems have different packages installed and enabled.)
Let's say the command to enter is 'yum install pkg1 pkg2 pkg3' (the documentation for some applications I need indicate the installation instructions this way, and not as the actual RPMs I need). Is there a way for me to run that on my offline system?
e.g. one way I can think of is to run that command on the online system, somehow if possible take note of what RPMs get installed, then transfer them to the offline system via USB and install all the RPMs via rpm command.
The problem with my above idea is that the two systems have different packages enabled, so even if yum on the online system shows a few dependencies being downloaded, I could run download and install all these RPMs and their dependencies on the offline system only to find several more missing dependencies, and dependencies of those dependencies.
I have a custom made rpm. I need to install my particular RPM in a list of rpms which are part of a program. Say I have around 20 patch rpms which needs to be installed I need to install this through yum command. My particular RPM namely Patch-list.1.1.1.2-1.noarch.rpm needs to be installed as the first rpm in the total list of 21 rpms. I can modify my spec files and Makefiles as per my wish. what needs to be changed so that my rpm Patch-list.1.1.1.2-1.noarch.rpm will be installed first.
View 2 Replies View RelatedI have been challenged to install CentOS occupying just 200 MB. As for now, I installed the OS with only first CD.
Just put :
@core
under %package directive in ks.cfg. I can see the space as of now is:
Code:
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 13G 740M 12G 9% /
/dev/sda1 99M 12M 83M 12% /boot
tmpfs 125M 0 125M 0% /dev/shm
I need to make it to atleast 300MB.I can see those RPM lying in Linux Box:
Code:
df -hyum remove 389*df -hyum remove *ldap*df -hrpm -qa --qf '%11{SIZE} %{NAME}
' | sort -k1n
0 basesystem
0 filesystem
[code]...
I will remove java, selinux-* but what other package I can remove.
Note: I dont need any application to run but just bare OS.
Anyone have any luck installing libre office?
I downloaded it, is the intent that you just install all of the RPMs in the RPM directory? There isn't too much documentation yet.
I've been trying for awhile to install the restricted formats, but when in the download & and install process, YaST2 pops up saying that such and such RPM has failed. I hit ignore, and it happens again and again to all the other packages, bar the odd few that work.
View 9 Replies View RelatedWe have an appliance with image being installed from CD/DVD installation
This appliance image is based on CentOS 4.7 kernel/installer/etc. Everything works fine, we ship this product for about 2 years. Recently I had to move it (port everything) to CentOS 5.5 Everything went fine and it works fine except one minor thing )) We can't install it from CD/DVD image yet. Actually it start fine, finds kickstart file, creates partitions correctly, copies install image to harddrive, but fails the next step when it tries to install RPM's
The message we get:
Quote:
the file termcap-5.5-1.20060701.1.noarch.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. If you exit your system will be left in an inconsistent state that will likely require re-installation"
Is there any way to install a kernel using rpms and avoid compiling its sources? I am using OpenSUSE 11.2.
View 7 Replies View RelatedI am using DSL thru QEMU. I was able to install it to a hard drive image.I started the SSH Service but I'm not able to connect to it from my Win 7 box via putty. I've edited the hosts.allow file to ALLOW external usersI've turned on the 22 port on my win 7 box firewall.
View 1 Replies View Relatedi have a question about rpm.pbone.net, www.rpmseek.com and these kind of pages: Can I trust these sites and is it secure to install rpms from these sites on enterprise workstations and servers?
View 1 Replies View RelatedI have installed Centos 5.3 64 bit version and run yum update so the system is up to date. However, I have noticed the kernel version that is installed is:
uname -a
Linux elektra.chemresearch 2.6.18-164.el5 #1 SMP Thu Sep 3 03:28:30 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
and when attempting to install from ATrpm.net the nvidia driver I get this message:
yum install nvidia-graphics169.07 nvidia-graphics169.07-kmdl-`uname -r`
...
Missing Dependency: /boot/vmlinuz-2.6.18-164.2.1.el5 is needed by package 1:nvidia-graphics169.07-kmdl-2.6.18-164.2.1.el5-169.07-94.el5.x86_64 (atrpms)
Now, yum says the kernel is up to date so how can I get the nvidia driver rpms to install? The entries in /boot are:
vmlinuz-2.6.18-128.el5
vmlinuz-2.6.18-164.el5
I have checked to make sure that the update repo is enabled. There were quite a few updates applied after the initial installation and the initial kernel was updated as the yum log indicates and also the entries in /boot.
today I setup a USB drive to use Qemu to boot Backtrack. It was so easy my grandma could do this! My thanks goes out to anyone who worked on the Qemu project!Now, I am wondering, how hard it is to get a distro to run persistently, using Qemu. I would like to have my .bashrc, apps I install, small scripts I write, etc. saved instead of the default bootup each time.
It doesn't matter which distro it is as long as it is Debian based. I did find this thread which I will try later but it sounds almost like I need to boot from USB first... not quite sure. I was hoping I could get further insight from someone before I waist too much time working toward something that will not happen.
I need to set up auditing on an old RHL 8.0 server running kernel version 2.4.18-14 but I can't seem to find an archive with the rpm for that version of Red Hat.
View 1 Replies View Relatedi heared that both modules are used to create virtual environment for linux, but what are the comparisons between them which differentiate them could you please explain them in brief .
View 1 Replies View RelatedI am running qemu version 0.13 on windows XP. My Host OS is Windows XP and my guest OS is Debian 4(Etch). How do I connect to internet from Debian OS? My windows OS can connect to Internet. The following is the launching command which I am using now to launch qemu in windows XP.
qemuqemu.exe -L "qemu" -boot c -hda "debian4.img" -m 512 -localtime -ctrl-grab -usb -net nic,model=ne2k_pci,macaddr=52:54:00:12:34:56 -net user -redir udp:161::161 -redir tcp:4440::22
I'm developing my own OS, but I'm having some problems with Qemu, because I need to change the floppy image from grub.img to os.img while the emulation is running, but how can I do this?
View 1 Replies View Relatedis there any way to decrease the cpu load during qemu execution?
View 5 Replies View RelatedI have a problem where in order to satisfy RPM dependencies, I need to remove packages and downgrade them in the same command. Imagine the following situation Before
A v2.0 depends on B,C
B v2.0 depends on C > 1.0
C v1.1
After
A v1.0 depends on C
C v 1.0
If I issue a
$ rpm -Uvh --oldpackage Av1.0.rpm Cv1.0.rpm
it will fail with "B depends on C > 1.0" If I issue a
$ rpm -e B
it will fail with "A requires B" so I appear to be in a catch-22. The obvious solution is to use a "--nodeps" and remove B before doing the downgrade, but I am creating these commands programmatically so I was hoping to use dependency resolution as a sanity check against an incorrect script. Is there any way to perform this downgrade without breaking the RPM dependency sanity checks by force?
Using yum installs the binary version of the software. Is it possible to use yum to download the src rpms , because i have seen one repo called Fedora src. I am using Fedora 11.
View 5 Replies View RelatedI'm trying to make an environmental variable RPMS that will resolve to a website. I know I have to make the changes in .bash_profile, but all the things I try don't seem to want to work.
I've tried:
PATH=$RPMS:ftp://rha-server/pub/os/rhel5/Server/
or simply just making the variable itself
$RPMS=ftp://rha-server/pub/os/rhel5/Server/
The second one made a variable just fine, but when I attempted to run this command:
rpm -ihv $RPMS/caching-nameserver*
I already have compiled the source and I want to make an rpm. What do i do with it? Can i utilize the make file?
View 1 Replies View RelatedI can't use shutdown -h now because I don't have permission (or root)the university script I have tells me to use ctrl-alt-delete but that doesn't shut it down like it says it should, instead it restarts it... so whats the safe way of doing this?
View 1 Replies View RelatedI have been using VirtualBox for really long time, and personally I like it a lot, specially the screen resolution auto change to fit the window size. Lately I have moved to qemu/kvm for the sole reason to learn kvm, I have been missing different things from VirtualBox, but Am trying to stuck with It for now as I said just to learn It. Now to my question, Is there a way to get an automatic screen resolution change to fit the window size of the VM like what I get in VirtualBox?
View 1 Replies View RelatedIm trying to use a DBMS to store rpms for been reach by YUM, what I need to know is how to generate the repomd.xml and make it point to my dbms using href like [URL]...
View 1 Replies View Relatedi have a input text file contain 10 rpms and they are old versions i need a shell script to check if these rpms is installed or not and if the newer version is installed and i need all the results in one output text file contain every rpm and its condition ( the same) or (new )or( not installed)
View 3 Replies View RelatedI am encountering this difficulty. I have no networking onto windows 95 4.0 which in on the linux ubuntu machine. Windows 95 4.0 has no networking..
View 4 Replies View RelatedFor RHEL 5.4,
# uname -r
2.6.18-164.11.1.el5
# uname -m
[code].....
show some "duplicate" rpms, one for the i386 and one for the x86_64 platform?
For example,
aspell-0.60.3-7.1.i386
aspell-0.60.3-7.1.x86_64
There are numerous other "dups" like that. Is this normal?
Where can I find the rpms for OpenMP for SciLinux 5.5 for64bit computing?
View 3 Replies View Related