I am encountering this difficulty. I have no networking onto windows 95 4.0 which in on the linux ubuntu machine. Windows 95 4.0 has no networking..
View 4 RepliesI am using the mount command to mount Windows shared folders are another machine on my LAN, to have them show up in the Linux filesystem. The command mounts the folders just fine, however the access is read-only.
In the command, I am also using the -o option to specify a username and password that should have full access. Also, I have used this identical command on my other distros and it seems to work fine. I've Googled high and low, trying to find a way to specify a Samba user/password for authentication. I know one of the other distros had a program that I could specify a Samba user/password to simulate a Windows login.
I want to setup a Linux File Server for a small windows network (around 50 users). I do know that I am gona need Smb service/pkg for that. I haven't used Samba for a while now and as per the best of my knowledge, entire communication (including usernames and passwords) between a samba server & windows client machines will be plain text. Is there any way to secure all this communication??
Secondly, if i remember correctly, MS windows wont let me mount more than one samba shares as network disk when all my shares can be accessed by different smb users with different passwords?? is there a solution to this problem? OR may be if there is any other package available for this purpose so that i wont have to use samba?
I'm trying to connect to a Samba share on a VirtualBox'ed Windows 7 that is connected to an openSUSE host in bridged mode. For reasons beyond my comprehension I cannot use the shared folders feature, so I'm using Samba instead. I configured a share through openSUSE's Samba server configuration tool:
[iTunes]
inherit acls = Yes
path = /home/myusername/iTunes
read only = No
valid users = myusername
I also set a password for this user using smbpasswd -a myusername. I can go to smb://192.168.1.6 on the host machine and log in to the share successfully, but on Windows 7 I see this: What am I doing wrong? I can connect to the shares list without any problems. It's just the login that doesn't work.
Update: I noticed that my Samba server is part of the WORKGROUP domain.
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.5.7-1.17.1-2505-SUSE-SL11.4-x86_64]
Sharename Type
[code]....
I'm mounting a Windows share using the following in Ubuntu: mount -t cifs username=MYUSER,password=1234 //192.168.1.5/myshare /mnt/windows_share
This works fine, but I would like to mount the share using the computer's hostname, not the IP. I can ping the hostname fine, but I mounting using the hostname instead of the IP does not work. The share cannot be found.
In Windows, I can access the share as \COMPUTER\myshare, and using Nautilus in Ubuntu, I can connect to //COMPUTER/myshare, but I can't use the name in the mount command.
From Konqueror/Dolphin is possible to access samba shares. If your computer is joined to a Active Directory domain and you use a domain user, you can access samba shares with smb://server.domain/share and you are not ask for user/pass (you use a kerberos tiquet). Kde programs as Amarok, K3b, ... can access files in samba shares without problem. But other programs, specially gnome programs (including the popular OpenOffice), are unable to use files in a samba share. If instead of using Konqueror/dolphin you use Nautilus, there is no problem because it maps the share to a local folder ($HOME/.gvfs/share in sever/) and the program are able to access files in samba shares without problems as the folder is mounted locally (as if you use cifs.mount). Its a problem to use konqueror/dolphin and have to change to nautilus to access samba shares.
If you use Windows you can mount it in an easy way. That's what I try to do from konqueror, not having to open a konsole and be able to mount the share in an easy way. I've tried with smb4k, but is has not worked for me (tried in 2 OpenSuse 11.3 and 1 opensuse 11.2). What Nautilus does when accessing a samba shares like smb://server.domain.dom/share is to execute the command: [URL]... What I try is to do the same, but just form Konqueror/Dolphin. I'd like to add a button to Konqueror/dolphin that pressing the button and if the URL points to a samba share, the share is mounted in $HOME/LocalNetwork/server/share. As I say, it can be as easy as executing the gvfs-mount, but don't know how.
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
I'm having trouble setting up samba to work with my vista machine. Whenever I try to mount certain shares I'm getting error 13- permission denied. Specifically, I'm trying to mount my entire C: with this command at the console:
mount.cifs //windows_box/C$ /mnt/windows -o username=tyler,password=****
I've also tried:
mount -t smbfs
mount -t cifs
The funny thing is that I CAN mount some other shares, but not all. My distro is slack-current. I've been following as many relevant threads on this issue for a while now and have tried as many of the suggestions as I could understand, but it's getting to the point that I've lost track of what I've tried and what I haven't. Things I have tried:
Checking permissions on the shares: seem to be ok
enabling encrypted passwords: not sure if I did it right.
editing the registry for LmCompatablity
[code].....
Does anyone know if it would be possible to do this? I read of people who have run Windows Server 2003 under qemu.. but i was wondering if i could get it easily to work in a secure sandbox, so i could run it as a internet server - knowing that it was secure and no one could then hack my computer.
View 1 Replies View RelatedI am baffled by fedora's feeble attempts to work with Samba. I have ran various versions of Fedora for the last few years, and sporadically, the Samba gui and samba itself have had such problems. My current problem in Fedora 11 (64bit) is that samba doesn't seem to be running correctly. It is allowing the hosting of shares, but it does not show that it is running in the services gui. It shows enabled, but when I attempt to change it by starting or stopping, nothing happens. The samba gui also shows that it launches but then never actually starts. I saw very similar problems with Fedora 9.
View 14 Replies View RelatedopesnSuse 11.1, linux 2.6.27.45-0.1-default x86_64 This host has two samba shares that are located on an OS/2 server. Neither mount at boot time but they do mount from the command line.
kernel: CIFS VFS: cifs_mount failed w/return code = -6
There are 5 other client computers that mount the same shares at boot time using almost (different user/pass info) identical data. I do not see what is different about this host.
I've a few group shares setup with samba and a PDC (using windows 7 clients) and the home directory for each user gets mounted automatically. I've configured group shares and only members of the respective group have access to them, but my question is how do I tell samba to automount group shares based on the user group?
View 1 Replies View Relatedon 10.04 I clicked to share my music folder with the network (other computer also having 10.04) and it installed samba for me. I restarted expecting to find sharing working as it had on the other computer by doing the exact same thing. But for some strange reason I can't access the shares on either computer through the network workgroup. It just says "Unable to Mount Location".
View 7 Replies View Relatedi have a ubuntu 10.10 desktop and laptop. i installed samba, and smbfs. i shared a folder on each computer. when i browse the network i can see the laptop from the laptop, and can see the desktop from the laptop, but i cant see the laptop from the desktop. when i try to mount the share it says unable to mount, but mounts it anyway...but, i need to be able to mount it so that rsync will see the shares as a dir on the desktop. i tried manually mounting via smbmount following several threads that i found, and i keep getting error sudo smbmount //192.168.1.78/share /media/laptop Password: Unable to find suitable address
that is as far as i've been able to get. i've looked and have only been able to find threads about windows shares, not between 2 ubuntu machines. and i dont know why laptop can see the desktop but not the other way around. they have identical smb.conf files
Is there a way for a normal user to mount samba shares from the command line using devicekit? It seems like I remember there was a way to do it using hal, but that's been replaced by devicekit in Lucid if I've read correctly.
I can click on the shares I want in nautilus under "Network", but I'm using fluxbox and I'd like to mount a few shares at startup. I read the documentation for the udisks command, but I can't figure out how to get it to work with samba shares.
I do know how to set up the traditional Window shares by modifying fstab and mkdir /mnt/share. What I was wondering in this day of laptops, if there was a script that could find and mount Window shares that were hooked into your local network, but only on a temporary bases. Something like what you would do mount a usb connection, such as a camera that you had the drivers for. I do know that networks are more complex, was just interested if something like that was developed yet. Just to let you know that my scripting skills are zero, and my ability to do so less.
View 1 Replies View RelatedI've, for years, been using a little script, as user, to mount network shares, like this:
mount.cifs //server/Data ~/Data -o username=robertw
Previously it used to be smbmount, but that changed. Anyway, the latest updates have stopped me be able to run this as a user. I tried running it as root and that just won't let me get access to the shares, tells me permission denied. I thought I'd try using fstab. This gives varying degrees of success.
Here are two of the entries:
//server/CAD /mnt/CAD cifs credentials=/etc/samba/auth.server.robertw 0 0
//server/Data /mnt/Data cifs credentials=/etc/samba/auth.server.robertw 0 0
The auth.server.robertw clearly shows my correct username and password.
Now, I can't get into the /mnt/Data directory at all, just says permission denied and I can only read from, but not write to, the /mnt/CAD directory. My /mnt directory is like this.
drwxr-xr-x 20 500 505 0 2010-05-11 06:21 CAD/
drwxr-x--x 170 500 501 0 2010-04-09 23:18 Data/
I'm on Mandriva 2010 if that's important.
I have setup CentOS 5.5 with SAMBA 3, configured all my Unix users, Samba users and shares. My server hostname is REL3
[root@REL3 ~]# smbclient -L REL3
Password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.0.33-3.29.el5_5.1]
[code]....
I have a problem with 'Samba' shares on Ubuntu 8.04. Bringing shared folders over from Windows (on another computer) is not a problem...until I try same process with a Windows backup folder holding .tib data from an 'Acronis' backup.The files appear in Ubuntu Network, everything looks o.k., Ubuntu just won't copy the data to another folder. Other shares work without a problem, its only with these ':.tib' data.
View 3 Replies View RelatedAs the subjects states, I cannot see my windows 7 shares from any of my *nix computers. I tend to over complicate things and I may do so here, but I want to try and be as thorough as possible in explaining the situation. I'll state w/ the basic layout of my lan code...
View 7 Replies View RelatedWe have a samba server with a couple of shares defined as follows:
Code:
[Storage]
comment = Storage
browseable = yes
path = /home/samba
writable = yes
[Backup]
comment = Backup
browseable = yes
path = /mnt/hd2/home/samba
writable = no
[Administration]
comment = Administration
path = /home/adm
valid users = adm
public = no
writeable = yes
browseable = no
We have two samba users: samba and adm. The first is used to connect to Storage and Backup shares, and adm is used to connect to Administration share. There are two problems:
1) If Storage and Backup shares are connected to a Win7 box, the Administration share cannot be connected. All we get is an error saying that that share is already connected with different username.
2) We have managed to work around this by connecting the Administration share with the IP-address of the server instead of it's name(?!). The problem then becomes that sometimes connecting Administration share this way makes Storage share read-only. Not always though.
Wrong "security" type in smb.conf (was "user", needs to be "share"). For some reason the Storage share still occasionally gets connected read-only. Win7 also tends to forget the passwords/usernames for some shares upon reboot (not all of them, though).
It's been awhile since I posted anything which is a good sign my install has been working well and I have been able to handle most everything. However, I'm not able to handle this issue. I recently installed F11 and everything went well. But, when trying to see my other computers on the local network, I cannot. I receive this error message: Unable to mount location Failed to receive shared list from server. I understand the message as it is obvious, but do not know how to fix it.
View 14 Replies View RelatedI am in the process of migrating my small workplace to a basic spin i've created of f14. Everything is suave but some file browser windows eg: file upload in gmail, hotmail etc, does not show my samba shortcuts i've created nor even the option to browse the network in the "places" section. It shows other locally created shortcuts but no samba ones. Just to test it, even creating an ftp:// shoftcut yeilds no dice. I had a quick search through the forums and I couldn't find anything. I have a feeling this has an easy solution that my inferior brain cannot comprehend! Loving F14 on my macbook pro and so are my employees in my office! Feels much less bloated than Ubuntu IMHO.
View 2 Replies View RelatedI can't for the life of me figure out why I cannot browse my own shares from my linux boxes. both run OpenSuSE 11.3 I follow swerdna's tutorials and reboot several times but don't have a clue as to whats going on to prevent me from viewing localhost shares or 2nd linux box shares. I get 'unable to mount location, Failed to retrieve share list from server' error when I click on my workgroup icon in nautilus.
View 7 Replies View RelatedFairly new to Karmic - wanting to setup some Windows Shares on an external Hard drive. I understand that I need to install Samba to do this but when I try to install it I get the following message:-
pat@CCBC-13112:~$ sudo apt-get install samba
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package samba is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or is only available from another source
However the following packages replace it:
samba-common-bin smbclient samba-common
E: Package samba has no installation candidate
I setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
I am using Ubuntu 9.1 and want to connect to my other computer (win 7) on my home network. I installed Samba...and it sees the 'windows network'...then it sees the pc I want to connect to, but when I try to dbl click on its name, I get 'unable to mount location, failed to retrieve share list from server'. There are at least 8 publicly shared folders on that PC that other Windows pc's can connect to without problem.
View 4 Replies View RelatedBeen trying to deal with this one for some time, and still not sure it's more or an issue on the Samba or Win 7 side.
Running Ubuntu 10.04 with Samba 3.4.7, using Windows clients from 2000 on up to access shares.
2000 and XP have no trouble both connecting initially to shares, but upon reboot the shares are disconnected and do not automatically reconnect unless one of them is double-clicked on. Passwords and mappings are saved such that Windows tries to reconnect upon restart. When manually reconnected in this way, shares remain open as they should. This isn't a big issue, but it would be preferable to have these shares reconnect so that links and shortcuts across the LAN work right from bootup.
The bigger issue is with Vista/Windows 7 - When shares are set up with appropriate passwords and such on the clients, they work as expected, until the client is rebooted. After signing into windows 2 things are observable:
- Black screen for 2-5 minutes before desktop appears
- error message appears when you try to double-click on a mapped share (even with a saved password) that the connection cannot be restored.
If you go into credentials manager and delete the saved password for the share(s) on the samba server, you are prompted for the password when you try to open any of the shares - reenter it and you're then fine until the next reboot.
There must be some issue with the persistence of the saved password, but not sure if this a Windows-side issue or not. Read some other info on this, and had to make the following changes earlier to even get Win 7 clients to connect to samba at all:
[URL]
It appears that when Win 7 starts up, it simply can't connect using the saved password, and the desktop doesn't come up until the reconnecting action(s) time out (if you disconnect your win 7 machine from the network the delay is not present).
It's not a game-breaker, but really annoying when rebooting having the delay and reentering the network share password(s).
So I setup the newest Ubuntu on my old desktop on a 30g HD and have 2 200G HDs with a ntfs file system on those two. I got SSH and FTP configured, then went on to setup Samba.I have it (seemingly) set up well. /dev/sb1 gets mounted on /data1 /dev/sc1 gets mounted on /data2.I want anyone connected to my router to be able to see this machine and be able to read and write to both shares.
I configured WINS on my laptop to point to the linux box. and i've seen the pc in question (TECH-PC) in "My Network Places" on both of our laptops.Long story short, I try to connect to my network share and it says i don't have permission and i need to contact my network admin. This computer is the only one with Linux installed, the rest are windows-OS.Let me know if you need more info, pretty stumped here, have searched, read, scrapped my install and started from scratch, maybe i need to sleep on it
I had an older fedora box (I think it was Core 3) that acted as my file server in my small network (4). It worked fine when I had all XP clients connecting to it. Recently we decided to get all new computers. So now I have a fedora 10 box acting as my file/print server and all Vista Home premium computers as the clients. For the life of me I can not get samba to work. When I try to map the network drives on windows it will not let me authenticate. I install swat and try it that way, still no luck. Here is a copy of my smb.conf file:
Code:
# Samba config file created using SWAT
# from UNKNOWN
# Date: 2009/05/19 21:47:31
[global]
workgroup = AIVILANET
server string = Bighat Samba Server
interfaces = eth0
null passwords = Yes
smb passwd file = /etc/samba/smbpasswd
passdb backend = tdbsam
username map = /etc/samba/smbusers
syslog only = Yes
announce version = 5.0
name resolve order = hosts wins bcast
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192
printcap name = CUPS
wins support = Yes
[HP-LaserJet-1200]
comment = HP LaserJet 1200
path = /var/spool/samba
read only = No
printable = Yes
printer name = HP-LaserJet-1200
oplocks = No
share modes = No
[printers]
comment = All Printers
path = /var/spool/samba
printable = Yes
browseable = No
[home]
path = /home/savona/
username = savona
valid users = @Users
admin users = savona
write list = savona
force user = savona
force group = savona
read only = No
hosts allow = 10.0.0.2