General :: Downloading Source RPMs - Fedora SRC

Apr 19, 2011

Using yum installs the binary version of the software. Is it possible to use yum to download the src rpms , because i have seen one repo called Fedora src. I am using Fedora 11.

View 5 Replies


ADVERTISEMENT

Fedora :: Downloading Multiple RPMs With Yum

Dec 18, 2009

I am trying to create a local repository of installed RPMs on my workstation. Using the 'rpm -qa' I can gather the installed RPMs on my workstation. Is there a way for me download all these RPMs using the output of 'rpm -qa'? 'yum --downloadonly' will allow me the option of downloading without installing. Since the installed RPMs are not cached in my workstation I have to download these RPMs again. If I have a local repo then it will be easier for me restore my installation without having to rediscover the packages needed. I am looking for how I can download multiple RPMs.

View 5 Replies View Related

Fedora :: Finding The Openssh 5.1 And 4.3 Source Rpms?

Nov 16, 2010

I am looking for openssh 5.1 and 4.3 source rpms. Where can i download them ?

View 3 Replies View Related

General :: Building RPMs From Compiled Source?

Jan 13, 2011

I already have compiled the source and I want to make an rpm. What do i do with it? Can i utilize the make file?

View 1 Replies View Related

General :: Command To Get Source ( Full HTTP/FTP ) Path Of 'Installed' RPMs?

Jul 17, 2010

Is there a command to know " From where a specific RPM package was downloaded & installed ( The full HTTP/FTP path ) " ? For example, if I had previously installed Firefox from here [URL] is there a specific rpm query, or any other place, from where I can get the full ftp path back.

View 1 Replies View Related

General :: Download - Re-Downloading (Kernel) Source?

Oct 21, 2010

yesterday i downloaded source of my virtual linux kernel and tried to compile it. It compiled indeed but could not boot from the new kernel. Then today i decided to re-downloading after removing the folder where source files are located but it said "linux source is already the newest version"

I use the command below: sudo apt-get install linux-source What should i do to be able to re-download the source.

View 2 Replies View Related

Server :: Standard Location For Downloading Source Code?

Feb 18, 2011

I'm about to recompile PHP from source and was planning to download the source code to my Ubuntu machine. Is there a standard place where all the source code goes? I know that PHP has many dependencies and would like to hopefully put it in the right place so as to satisfy as many as possible.

View 6 Replies View Related

General :: Fedora Core Downloading In An MiB Format?

Apr 4, 2010

I know that Windows likes to store files according to Gibibytes, but why is Fedora Core downloading in an MiB format? Is that Mibibytes?

View 3 Replies View Related

General :: Downloading The Dvd Installation Version Of Fedora 13 ?

Sep 15, 2010

Im currently running windows 7 and im looking for the best way to install fedora 13 and run a dual boot. i am open to other OSes as well mostly thinking of a tri boot with ubuntu but not really sure.

I am downloading the dvd installation version of fedora 13.

I have 110GB of unallocated space to put towards the project my main concern is how i should go about partitioning the space in the best way. (how much space for /boot and swap. what type of partitions should i use and so on)

Second concern would be to make sure i correctly configure grub(i have had trouble with grub recently) i just dont want to run into any issues after the installation.

View 4 Replies View Related

Fedora :: Firefox 3.5 Final RPMS For 10?

Jul 13, 2009

Anybody know of any Firefox 3.5 final RPMS for Fedora 10? I looked a rebuilding the Fedora 11 RPMS for Fedora 10, but the other packages requiring an upgrade as well is getting out of control.

View 7 Replies View Related

Fedora Installation :: F11- Where Are Update (1 RPMs)

Nov 19, 2009

I'd like to confirm if the latest updates of a couple of rpms is causing me a problem. I'd like to downgrade these rpms to an intermediate version (greater than the original F11 versions, but less than the latest version). I've looked on a few mirrors, and all I can find is the latest update. Are intermediate versions of an rpm discarded when they're replaced with new versions? Are these intermediate versions available some place?

The two rpms I'm interested in are:
gstreamer-plugins-good-0.10.16-1.fc11.i586
gstreamer-plugins-base-0.10.25-1.fc11.i586

View 2 Replies View Related

Fedora :: Fewer Updates Are Delta Rpms

Jun 3, 2010

I have noticed that the updates to my f12 64bit systems are running longer due to the fact that fewer fedora updates are delta rpms. Why is this. I know that rpmfusion updates and other third party updates are not covered.

View 9 Replies View Related

Fedora :: Locate Old RPMs No Longer In Repository

Jun 12, 2010

I know there is a command that will show what rpms are installed on a machine that are no longer available in a yum repository, but I can't remember what it is! It is useful to identify packages left over after an upgrade that are no longer needed, or to identify third party software.

View 2 Replies View Related

Fedora :: Old RPMs Complaining About Missing Dependencies

Jul 10, 2010

I have been running f13 ever since it was released. Evidently the kmod-rt2870 rpms are never deleted when older kernels are removed. When I tried to do today's update the Package Manager and yum complained that some of the older kmod-rt2870 packages left over from fedora 12 were missing kernel dependencies. The kernels have been missing for a long time. I don't know why the package manager started complaining today.

I tried
1) yum clean all
2 rpm --rebuilddb
3) removed the /lib/modules directory corresponding to the old kernels
and the problem persisted.

I finally removed all of the kmod-rt2870 rpms what where originally installed in fedora 12 and I was finally able to complete the update. Why did the package manager suddenly start complaining about the missing kernels?

View 1 Replies View Related

Fedora :: Xmms-mp3 And Lame Rpms For FC12 ?

Jan 16, 2010

I am looking for xmms-mp3 and lame rpms for FC12. where can i get those packages ?

View 2 Replies View Related

Fedora :: .rpms Showing Up As Updates After Yum Localinstall

Dec 14, 2010

I just installed F14 (so far I like it ). I had F13 but decided to wipe the old OS and install F14 fresh. In the course of replacing all of my old programs, I had to download several .rpms like the .rpms for the RPMFusion repos and the .rpm for Adobe Reader. After downloading the .rpms to a download directory I ran yum localinstall to install them. The installations went well and I didn't have any problems.

However, now the packages are showing up as updates which need to be installed in the software updates window. I also ran yum check-update and they are showing up as updates which need to be installed. I tried deleting the .rpms and also running yum clean all but they are still showing up as updates which need to be installed.

View 6 Replies View Related

General :: Possible To Install RPMs In Qemu?

Aug 28, 2010

Can we install packacges/rpms for example in qemu?

View 2 Replies View Related

General :: Rpm Needs To Install First In A List Of RPMS?

Jan 24, 2011

I have a custom made rpm. I need to install my particular RPM in a list of rpms which are part of a program. Say I have around 20 patch rpms which needs to be installed I need to install this through yum command. My particular RPM namely Patch-list.1.1.1.2-1.noarch.rpm needs to be installed as the first rpm in the total list of 21 rpms. I can modify my spec files and Makefiles as per my wish. what needs to be changed so that my rpm Patch-list.1.1.1.2-1.noarch.rpm will be installed first.

View 2 Replies View Related

General :: Finding Rpms For Red Hat 8 Kernel Ver. 2.4.18-14?

Feb 24, 2010

I need to set up auditing on an old RHL 8.0 server running kernel version 2.4.18-14 but I can't seem to find an archive with the rpm for that version of Red Hat.

View 1 Replies View Related

Fedora Installation :: Installing RPMs (NOKEY) Key ID 4ebfc273

Apr 21, 2009

I am trying to install f10 on an old dell dimension 2400 with an old video chipset. Everything was working pretty smooth until I tried installing an .rpm file from a flashdrive. At first, it looked like it was installing the rhpxl file but gave a warning message that said

warning:rpmts_HdrFromFdno:Header V3 DSA signature: NOKEY, Key ID 4ebfc273

then says the public key will not be installed. Is there a file/command that I can download and run from a flash because I have no capable internet connection because for some reason linux doesn't see it in the install.

View 2 Replies View Related

Fedora Hardware :: Canon IP3600 On F13 - Two RPMs Installed

Jun 3, 2010

Okay, according to CUPS, I've installed this printer, but whenever I try to print, it tells me it's completed, but the printer does nothing. So I search a little and found some Canon Linux drivers from Canon Europe. I downloaded the RPM version, which gave me two files: cnijfilter-common-3.00-1.i386.rpm and cnijfilter-ip3600series-3.00-1.i386.rpm. So I installed the common file, followed by the ip3600 file, using rpm -ivh [file name] at command line. The RPM install went fine. However, what do I do now? I tried searching the CUPS list of printers, and nothing new is listed (oddly, CUPS seemed to have drivers for virtually every iPxxxx printer except the 3600 when I first installed). I tried restarting cups, no difference. I even tried to print (suspecting nothing had changed, but hoping) and it still thinks it's printing, but nothing comes out. What did installing those two RPMs do? Did it put a file somewhere that I need to reference in the cups admin page?

View 5 Replies View Related

Fedora :: What Is The Timing On Updated RPMs For New BOINC Versions

Jun 4, 2010

I've just recently started using Fedora again and have a question about BOINC.I see that Fedora 13 is using 6.10.45, but the latest recommended release is 6.10.56.What is the timing on updated RPMs for new BOINC versions? Or is there a guide to updating manually, which I've been unable to locate?

View 4 Replies View Related

Red Hat / Fedora :: Need Ulterior Site To Get RPMs To Update RHEL5

Mar 28, 2011

Have project to move to RHEL5 with Oracle11g. During process, went to Red Hat Network and they were not currently available. Is there another source of RPM's for installation on RHEL5?

View 1 Replies View Related

General :: Downgrade And Remove Rpms In The Same Command?

Mar 22, 2011

I have a problem where in order to satisfy RPM dependencies, I need to remove packages and downgrade them in the same command. Imagine the following situation Before

A v2.0 depends on B,C
B v2.0 depends on C > 1.0
C v1.1

After

A v1.0 depends on C
C v 1.0

If I issue a

$ rpm -Uvh --oldpackage Av1.0.rpm Cv1.0.rpm

it will fail with "B depends on C > 1.0" If I issue a

$ rpm -e B

it will fail with "A requires B" so I appear to be in a catch-22. The obvious solution is to use a "--nodeps" and remove B before doing the downgrade, but I am creating these commands programmatically so I was hoping to use dependency resolution as a sanity check against an incorrect script. Is there any way to perform this downgrade without breaking the RPM dependency sanity checks by force?

View 2 Replies View Related

General :: Make An Environmental Variable RPMS?

Apr 1, 2011

I'm trying to make an environmental variable RPMS that will resolve to a website. I know I have to make the changes in .bash_profile, but all the things I try don't seem to want to work.

I've tried:
PATH=$RPMS:ftp://rha-server/pub/os/rhel5/Server/
or simply just making the variable itself
$RPMS=ftp://rha-server/pub/os/rhel5/Server/

The second one made a variable just fine, but when I attempted to run this command:

rpm -ihv $RPMS/caching-nameserver*

View 5 Replies View Related

General :: How To Install CentOS With Lesser RPMs?

Jan 30, 2010

I have been challenged to install CentOS occupying just 200 MB. As for now, I installed the OS with only first CD.

Just put :

@core

under %package directive in ks.cfg. I can see the space as of now is:

Code:

# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/sda3 13G 740M 12G 9% /
/dev/sda1 99M 12M 83M 12% /boot
tmpfs 125M 0 125M 0% /dev/shm

I need to make it to atleast 300MB.I can see those RPM lying in Linux Box:

Code:

df -hyum remove 389*df -hyum remove *ldap*df -hrpm -qa --qf '%11{SIZE} %{NAME}
' | sort -k1n
0 basesystem
0 filesystem

[code]...

I will remove java, selinux-* but what other package I can remove.

Note: I dont need any application to run but just bare OS.

View 1 Replies View Related

Fedora Installation :: DRPMs Versus RPMs With Multiple Machines

Mar 10, 2010

I have a home network with 6+ x86_64 machines, all with similar setups. In the past (FC10 and before), I've had common package repositories (e.g /var/cache/yum/fedora/packages) shared via NFS with all the machines (and with keepcache=1 in /etc/yum.conf). That way, a given RPM only got downloaded once; the other machines would then pull it from my local package repository. And I don't mind the disk usage of keeping one copy of all my old RPMS around.

It seems that while DRPMS is great for a single machine, it doesn't make sense in my case. If I have to download the DRPM 6 times (and take the time/CPU hit to recreate the RPM 6 times), I might as well have downloaded the RPM once and been done with it. Is there a not-too-convoluted method to keep a common package repository across multiple machines even with DRPMS? Or, better, to have that first downloading machine pull a DRPM, generate the RPM, then save the RPM in the local shared repository?

View 4 Replies View Related

General :: Use A Dbms To Store Rpms Instead Of File System?

Jan 5, 2010

Im trying to use a DBMS to store rpms for been reach by YUM, what I need to know is how to generate the repomd.xml and make it point to my dbms using href like [URL]...

View 1 Replies View Related

General :: Shell Script To Check If Rpms Is Installed Or Not?

May 1, 2010

i have a input text file contain 10 rpms and they are old versions i need a shell script to check if these rpms is installed or not and if the newer version is installed and i need all the results in one output text file contain every rpm and its condition ( the same) or (new )or( not installed)

View 3 Replies View Related

Fedora :: Setup A Regular Local Repository (rpms) And Manage A System With It Using Yum?

Feb 8, 2010

It is not difficult to set up a regular local repository (rpms) and manage a fedora system with it using yum. I wonder if the process is same for deltaRPMS. Has anyone successfully set up a local deltaRPM repo or is this something reserved for online repos? How does one achieve this?

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved