Fedora 12 64bit I need nbd-client which is supposed contained in kbd package.
$ yum list kbd
Code:
Loaded plugins: presto, refresh-packagekit
Installed Packages
kbd.x86_64 1.15-9.fc12 @fedora
kbd already installed.
[Code]...
Fedora 12 64bit. I need nbd-client which is supposed contained in kbd package.
$ yum list kbd Code: Loaded plugins: presto, refresh-packagekit
Installed Packages
kbd.x86_64 1.15-9.fc12 @fedora
kbd already installed.
But I can't find kbd-client;
[Code]...
I have 5.8GB of RAM.
I have 6.1GB of swap.
At some point in time my VMs exceeded the 5.8GB limit and overflowed into swap (all dev VMs). I have since shut down the VMs and restarted Firefox (memory hog). Right now I have 0.73GB in RAM and 0.29GB in swap. I want to move all of the data in swap into RAM where it will be faster. So I will end up with 1.02GB in RAM and 0GB in swap. Is there a quick command to move data contained within swap to RAM? I know of the swapon/swapoff command. I was wondering if there was another method which clears swap.
I have a file called test. It has the following contents.Code:there youI want the output to be.Code:replaced youI am trying to use the sed command to replace every occurance of "hey newline there" with "replaced". I tried the following naive apporach.Code:sed 's/heythere/replace/' testThis gives a result containing the same data as the test file.
View 3 Replies View RelatedI have the following problem:
CASE_FOLDER
----------->0_FOLDER
-------------------->ForceX ForceY ForceZ
[code]...
which one are we supposed to use? there is a conflict.
View 3 Replies View RelatedClients are not able to access FTP thru browser: ftp://IP.When you open it thru browser, it does not ask for a usename or password but shows a PUB diretory instead. I tried to telnet port 21 and shows that it is using VSFTP instead of Plesk's ProFtp.
View 1 Replies View RelatedBy default, when applications run, they are limited in the amount of RAM they are allowed to access right? Technically my VLC could not access memory addresses used by Chrome. But how is it possible for the operating system/compiler to mistakingly allow access to an address a code is not allowed. I know alot of 'exploits' and 'payloads' take advantage of this fact and create variables that take up too much space and 'overflow' into other addresses, but how does this actually happen?
Are some programs more prone to this than others? Does it matter in which language they are coded in? For example, I know C is allowed to play around with memory, while Java is not. Also, what are the advantages of this? What if someone wrote malicious code to access someplace in memory, what could they do? The only thing I can think of is passwords/keys stored in RAM.
PS I thought about putting this in Stack Overflow, but my question is much broader than just specifically related to a programming perspective. If I've placed it in the wrong place, I'm sorry.
I need to know what files are contained in kernel headers and where are they?
Are they the same for each kernel or no?
I need slack kernel headers for kernel 2.6.27.27
I just need the headers
I'm struggling with a C# program to read binary records from a database. The records were created with Borland Delphi. Error: You cannot use fixed size buffers contained in unfixed expressions. Try using the fixed statement.
View 1 Replies View RelatedI'm trying to install the samba client package by running the following command:sudo apt-get install smbfs. However, it hangs forever and times out on [URL]..Reading package lists. Building dependency tree Reading state information... Done The following extra packages will be installed:
cifs-utils
The following NEW packages will be installed:
cifs-utils smbfs
0 upgraded, 2 newly installed, 0 to remove and 144 not upgraded.
Need to get 41.2 kB of archives.
After this operation, 184 kB of additional disk space will be used.
Do you want to continue [Y/n]? Y
[Code]...
I am installing a new hard drive to replace my old one that contained the /var and /home directories. I don't want to copy the whole directories, especially from home because there is a lot I don't need in it.What I need to do is set the mount points for the two partitions I have made on the new drive to /var and /home, but it will not let me do this with the other drive still running. I can't unmount /var and /home while the computer is running, and I would guess that having two drives with /var and /home on them would not work.
So, how can I set the mount points on the new drive and copy the files I need from the old to the new one? It would seem that would require two /home partitions to be mounted at the same time, but I don't think that is possible. I am sure there is some way, probably many ways knowing Linux so please,
I'm looking to use a vnc client so I can connect to my other windows machine. I thought i'd use realVNC as I've used it before from windows and it seems to do the job... the problem is that when I try and install it I get the following message: Package /temp/vnc-4_1_3-x86_linux.rpm could not be installed.
Details: Subprocess failed. Error RPM failed:error: Failed dependencies: libstdc++-libc6.2-2.so.3 is needed by vnc-4.1.3-1.i386
Is it a problem that I'm trying to install this on a 64 bit Suse 11.1 installation? Can anyone recommend a solution (I can't find the package to install), or any other good vnc clients I can easily use?
I have installed Vlc Media Player ... I use fedora14 when I want to run it, it says "VLC is not supposed to be run as root. Sorry. If you need to use real-time priorities and/or privileged TCP ports you can use vlc-wrapper (make sure it is Set-UID root and cannot be run by non-trusted users first)."
I found something that said: " configure --enable-run-as-root "
But this is my question that now that I have installed Vlc, what should I do? where should I do the configuration?
See screenshot attachment. I know there was going to be changes to GNOMES appearance, but I thought it was just moving Close/Maximize/Minimize to the other side. If the screenshot is correct I'll just adapt and move on, if not how do I fix it?
View 5 Replies View RelatedI don't mean this to be in any way a critical post but I've recently switched to Debian from numerious other distros because of it elidged stability and speed. However I'm using the stable version and frequently have to reboot for certain things to work and frequently multimedia based programs crash on me. I've installed the repo from debian-multimedia.org so I don't know if that's causeing any problems. It crashes on me multiple times a day. Now it's not the OS itself which is the problem I'm sure but more the software in the repos. However it was my udnerstanding that this software was pretty darn well tested.
View 14 Replies View Relateddid a fresh install of 10.04 on the wife's laptop. But the visual feedback of the booting process in kind of weird. Here is what I experience: This is on a laptop with intel graphics card. cat /proc/fb prints inteldrm. Which one of these is 'Plymouth' or where in the above stages is it supposed to appear exactly? Isn't Plymouth supposed to give me a flicker-free booting experience from Grub - to - Desktop, atleast on Intel-based computers? How do I fix these flickers? I tried the FRAMEBUFFER=y fix and it only eliminated the blinking cursor but I still see the screen going black and flicker.
View 1 Replies View RelatedIs the ctrl-alt-del > shutdown feature that used to live in 9.10 supposed to be missing in 10.04?
View 5 Replies View RelatedRunning Natty Narwhol. IIRC, the F1 key was the "help" shortcut. Now F1 does nothing. Is F1 supposed to be the "help" shortcut key or has this changed?
View 1 Replies View RelatedI've been working on it for over 20 hours and I'm stuck. It asks the user for input and then prints a shape of a certain length.
View 4 Replies View RelatedI'm finding the NetworkManager applet very confusing.When I start up at a new location I can use the "Connect to Other Network..." menu item to bring up the list of available networks, and I'd expect that by selecting one of these and clicking "Connect", then configuring and clicking OK, I'd get a connection. Instead the dialog just goes away and nothing else happens. Is something broken with NetworkManager, or am I misunderstanding how this is supposed to work?
By switching back and forth between NetworkManager and ifup I'm eventually able to establish a connection to a new access point, but it's been a painful process.I've also encountered a problem reported by others, where when my system fails to suspend/resume properly the /var/lib/NetworkManager/NetworkManager.state has NetworkingEnabled=false and I need to manually edit this before restarting networking... but that's a separate issue, and I can work around it with the manual edit (or just add a startup script to do this automatically).
Has anyone had success with integration of Gwibber and Flickr and if you did how did you do it? The actual text I tried adding my flickr account to Gwibber in Ubuntu 10.04 Lucid Lynx and in the end I am not sure if it works or not. There is a documented bug related to Gwibber and Flickr. [URL] Now I did check my screen name (which is naggobot) and I used that and also every other id I could imagine, including direct http link
[URL]
and yahoo email address that is tied to Flickr account. In the end I did manage to get some input to the Gwibber window from the Flickr account but that input was from photo stream of a contact of mine. So my question is has anyone had success of getting their photostream from Flickr to Gwibber? If you succeeded in this how did you do it i.e. what did you fill in to the user name field? Please be super accurate.
I've upgraded to Kubuntu 10.10 but there is nothing in my system tray popping up telling me there are packages to upgrade (there are 83 btw!). What should be running? In control panel->software management->settings I can see I have "notify when updates are available" ticked, but I've not been notified of anything. What can I check or install to sort this out?
View 3 Replies View RelatedI have installed Fedora15. When I tried to install other softwares by "yum", I got following errors:
Code:
libXpm-3.5.8-3.fc15.i686 was supposed to be installed but is not!
Also, when I tried to remove some software by "yum erase ......", I got following similar errors:
Code:
...was supposed to be removed but is not.
I'm just coming from Ubuntu(don't hate me) and realized that there are no Nvidia drivers in the repos. I had trouble even getting the repos to respond on the live cd or after installation; is opensuse having network problems? I changed the repositories to the GA tech libraries because they are closer and now they work, However I can't get any Nvidia drivers to install. Now, I'm not a super linux guru that can fly around linux like super man, but I'm also not a newbie to linux. Or at least I think I'm not.
I need to get Nvidia drivers installed...what is the easiest way to do that, considering the URL... repo doesn't seem to want to connect either.I don't know what the deal is, but Internet is rather clumsy with opensuse or with KDE, I'm not sure yet.
I have a script that takes a location and does something to them then creates new files in the supplied location. I was trying to get the script to create the location if it didn't exist, but i can't figure out why it won't work. Here's what i've got right now
Code:
#!/bin/bash
destdir=$1
[[ -z "$destdir" ]] && { echo "No destination parameter supplied, exiting"; exit 1; }
[[ ! -e "$destdir" ]] && { echo "$destdir does not exist, exiting"; exit 1; }
[code]....
when i run the first one, it works if the supplied folder exists. If i try with my modification with a name such as /media/place/Foo bar, it creates a folder called Foo in the supplied dir, and bar in the dir i'm in when i run the script. the -p flag on mkdir creates parent directories btw.
In System Monitor, under the "System" tab, my Processor and RAM is listed (including specs for each of these), but my Intel graphics card (4500) is not listed at all? I am experiencing some periodic screen flicker - could it be that the video card is not detected?
Screencap of my system monitor [URL]
This works for me in Windows but not my Linux box. Does it work on ur linux box?
View 4 Replies View Relatedhow am I supposed to use this guide. The doc states different messages lengths and formats, as a programmer, how should I utilize these information?Just fyi, my question is a general qns and does not necessarily target to just using netxms, but could be any other opensource as well.
View 4 Replies View RelatedIs simplebackup (sbackup) supposed to be running at all times in the background? i.e. show itself on the top panel at all times?
View 1 Replies View Related