General :: Not Able To Boot Distro In 2nd HDD
Apr 9, 2011
I am not able to boot distros installed in my /dev/sda HDD. I was using the linux distros in sda for a long time now. But, suddenly it has stopped booting. So, temporarily i have install a new one on sdb so that the problem can be fixed. That HDD is also not showing up in my BIOS boot priority list.
Code:
fdisk -l
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders, total 78165360 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x5454455
Device Boot Start End Blocks Id System
/dev/sda1 63 31888079 15944008+ 7 HPFS/NTFS
/dev/sda2 61433854 78043135 8304641 5 Extended
/dev/sda3 * 42456960 61432559 9487800 83 Linux
/dev/sda4 31889408 42436607 5273600 6 FAT16
/dev/sda5 77723648 78043135 159744 82 Linux swap / Solaris
/dev/sda6 61433856 77721599 8143872 83 Linux
Partition table entries are not in disk order
Disk /dev/sdb: 80.0 GB, 80026361856 bytes
240 heads, 63 sectors/track, 10337 cylinders, total 156301488 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x454545545
Device Boot Start End Blocks Id System
/dev/sdb1 15181 50682239 25333529+ f W95 Ext'd (LBA)
/dev/sdb2 * 50682240 156295439 52806600 7 HPFS/NTFS
/dev/sdb5 15183 14348879 7166848+ 7 HPFS/NTFS
/dev/sdb6 14348943 25613279 5632168+ 83 Linux
/dev/sdb7 25613343 50682239 12534448+ 7 HPFS/NTFS
View 10 Replies
ADVERTISEMENT
Mar 22, 2011
I have an old laptop I'd like to try Bodhi linux on from a usb stick. I've got it installed running on a newer laptop so I know the usb install works. I've searched considerably & haven't found the dummy version of how to boot any distro on usb from a floppy. I have used a DSL floppy to boot Damn small on usb. Is there an easy way to boot Bodhi or any other linux distro that is on usb using the same floppy? I type dsl fromusb to get damnsmall to run. Bodhi fromusb doesn't work.
View 1 Replies
View Related
Mar 28, 2011
If I can install more than one distro on my Multiple boot pc. I already have, Mandriva, Win xp, and Win 7 on. But you know how it is, you want to try out all the linux systems if that is possible. I guess using a live cd would allow me to do it. I do not want to bugger up the systems I already have on.
View 9 Replies
View Related
Apr 11, 2010
I have a laptop dual booting to Windows 7 and Opensuse 11.2. However, I'd like to switch to a different Linux distro (probably Ubuntu, that's what I'm used to)
Is there a way for me to do it without losing the Windows 7 setup/data?
View 1 Replies
View Related
Jan 3, 2011
I have a box with Novell Suse linux installed. It asks for username and password I do not have and cannot figure out. I also have a SantaFe distro CD with which I would like to replace the Suse on the box. I cannot get the box to BIOS to change the boot order to boot from CD. I would like to break free of Windows, but can't seem to get there from here...
View 5 Replies
View Related
Mar 15, 2011
Situation- Laptop (2003 made Toshiba 2410) with dead secondary controller, so no CDDVD drive, BIOS does not support any form of booting from USB. Laptop has working floppy (had to repair it) distros that are good for older units like that that also support booting from diskettes, and then can mount and install from a USB CDDVD rom drive.
View 7 Replies
View Related
Jun 15, 2011
I have been trying to do some testing with server cloning and partitioning and hit some walls. The server is question is a Dell PowerEdge 2950 and the Distro's I have tried are :-
Clonezilla-live-1.2.8-46-i686
Parted Magic 6.2 & 6.2
The problem is a little strange is that the console appears to keep reporting either unreadable sectors on sr0 for clonezilla till SQUASHFS fails to load/locate and it panic's or in the case of Parted Magic.. copying files to RAM ..cp: read error: Input/output error
Mounting pmagic-6.2.sqfs... mount: wrong fstype, bad option, bad superblock on /dev/loop1, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Mounting //sqfs_disk/pmagic-6.2.sqfs failed.
type "exit" to reboot the computer
bash-4.1#
Now the only problem here is I can't check the log's or dmesg the thing because it freezes the KVM and as I am offsite I have no spares with me Parted Magic does boot on a number of other servers like the R900 but will not boot at all here, I have tried safemode and disabling various other flag's but I must be missing something.
View 4 Replies
View Related
Mar 19, 2011
Have 3 linux distros on 3 hard drives. lost one distro from boot loader. how do I restore missing distro to boot loader? drive was not written to when one distro (drive) was updated.Example drives a, b, and c each had listing on boot loader, now after upgrade to distro on drive b order on boot loader is drive b then a and none for c.
View 5 Replies
View Related
Jan 9, 2010
nominate a disastrous distro from past or present that was simply AWFUL and what exactly was so bad about it?
View 14 Replies
View Related
Feb 18, 2010
I think the title says it all really - I've installed Mint onto a Acer aspire 5315 laptop. Its a dual boot system using Vista Basic. Grub works perfectly and to be honest Mint is great. really enjoying playing and learning. My problem is that the laptop overheats when using Mint - the cpu fan doesn't cut in and the laptop shuts down to protect the system. According to a swift google this seems to occur with mint (possibly particularly with Acer's) and maybe with other distro's too. However I'd like to keep trying to see if i can find one that works.
So my rather obvious newbie question is can I just get another distro dvd and install this onto the partition containing mint thus deleting the previous install? If I did this would Grub show the new distro ok or would it keep searching for Mint. I have a back up so if all else fails I can reinstall everything but that will have to wait till I get home
View 4 Replies
View Related
Dec 15, 2010
Lubuntu is nice - but it seems the LXDE version is not as up to date as Fedora LXDE Spin or even Debian squeeze with LXDE installed. I do like Chromium on Lubuntu though... its faster and a nice touch. I am looking for a lightweight 64-bit distribution for my main laptop (it is by no means "old" or "low spec" but I like that Lubuntu starts up in like 2 secs).
LXDE version seems not to be recent (esp in 10.04 version which seems to work more stably for me - with Nvidia drivers etc)64 bit install is currently a pain - requires first install of minimal CD or alternate CD both of which required wired Ethernet, then install of lubuntu from PPA. Native 64-bit support would be nice. Linux Mint LXDE, for example, is also only 32-bit.
View 4 Replies
View Related
Nov 12, 2010
I've recently bought a Toshiba Satellite C650 with the following system configuration: 3 GB DDR3 Memory, a DualCore Intel Core i3 at 2266 MHz, 320 GB, 5400 RPM, SATA-II Hard Disk and an integrated Intel(R) HD Graphics video card.
I tried at first to install Ubuntu 10.10 through Wubi. That didn't seem to work, as my laptop froze at the moment where all the numbers and letters appear and my hardware is checked (I'm kind of new to this, sorry). A restart was needed. Next, I tried to boot the same distro with a USB Live stick. The same thing happened again.
At first I thought that the iso file was guilty for this, but then I tried a bunch of other Linux distros such as Fedora, Mandriva, EasyPeasy, Puppy, Sugar on a Stick and Slax. I even burnt a Slax Live CD. Nothing changed. I read somewhere that there are video cards that aren't compatible with Linux. Someone recommended me to update my drivers. After I did that, I tried again but without any luck. Another tip was to mess a bit in bios at my hard disk in order to change something from ahci to compatibility. That didn't work either.
I really don't know what to do.
View 9 Replies
View Related
Jan 13, 2010
I've just attempted a distro upgrade (to 9.10) and have been left with a machine in an unbootable state.
I tried using a recovery boot through Grub and can see that the boot process hangs after outputting:
Code:
swap: waiting for UUID=$random-string$
If I ESC to get a prompt, I get:
Code:
General error mounting filesystems
I can't run dpkg-reconfigure as I get a read-only filesystem error.
View 2 Replies
View Related
Jun 9, 2011
I had to shutdown the computer while upgrading from Lucid to Maverick as it froze(bug in X11) and then when I start the computer I get kernel panic messages. I used a LiveCD to backup my files and I was wondering if there is a way to log in or reupgrade the Ubuntu in some way from the liveCD.
I don't want to do a fresh install as there are a dozen things I had installed and configured in my system the last 1-2 years.
View 1 Replies
View Related
Jan 14, 2010
I've just attempted a distro upgrade (to 9.10) and have been left with a machine in an unbootable state.
I tried using a recovery boot through Grub and can see that the boot process hangs after outputting:
Code:
If I ESC to get a prompt, I get:
Code:
I can't run dpkg-reconfigure as I get a read-only filesystem error.
View 2 Replies
View Related
Dec 17, 2009
I have been unsuccessful to dual-boot fedroa 12 with anyother distro? what is the solution?
View 5 Replies
View Related
Jan 30, 2010
I have a laptop dual booted with Win 7 and Fedora. I want to replace Fedora with Ubuntu. Is it safe to simply delete all the non-ntfs partitions during the Ubuntu install? I just don't want to whack Windoze as I depend on it ofr work. THe current partitions are code...
View 3 Replies
View Related
Sep 6, 2010
I have a linux box set up as a multi-purpose server for my home with three Windows client PC's. The linux box is based on a slightly modified Slackware 9.0 distribution using Linux 2.4.20 and an unfortinately old, slow AMD processor with a miserable 512Kb RAM. The linux box serves the CIFS file system to the Windows boxes, runs the SQUID HTTP proxy, the Apache web server, a print server, does masquerading, mail serving and a very effective firewall using iptables.
This system, although slow, has run perfectly for several years.Let me say that again - This system works perfectly.I had decided that now is the time to upgrade the hardware, so I bought a Gigabyte LGA775 motherboard which has two 1Gb network interfaces on it, an ASUS 256Mb PCI-E display card, 2Gb of DDR3 RAM, an Intel Core2-Quad processor and a bunch of 500Gb SATA drives to set up a RAID5 array (but I intend that the system boot off one of several 40Gb PATA drives I have).I set up the processor, motherboard, display card, RAM, a SATA DVD Drive and a 40Gb PATA hard disk in a "breadboard" layout and installed distro 13.1, being careful to set up the static IP for the local network, dhcpcd to get an IP address from the cable modem (my internet connection) and to enable ip_forward in the network configuration.
Then I installed a script invoked by /etc/rc.d/rc.local which installed all the SAME iptables rules as my old Linux box. There was one minor glitch when I had to change 8 occurrences of "-d ! $LOCAL_NET to" "! --destination $LOCAL_NET" but that was no problem. I also set up /etc/resolv.conf, /etc/hosts , the BIND server files etc. etc. exactly as in the old box.
I am able to ping mirror.aarnet.edu.au (this is at the heart of Australia's internet hub network - if it's down the whole bloody thing is down) and have the system find the correct IP from the designated nameservers and contact that server with a return trip time of 35ms. I am able to run a telnet session from one of the Windows boxes and edit files on the Linux server. So both network interfaces work and I've got them the right way around.I am able to run FTP on one of the Windows boxes and connect through to mirror.aarnet.edu.au, although it seems to hang when I try a DIR (but then so does the old linux system).
View 83 Replies
View Related
Nov 22, 2010
I managed to do something that takes real talent to do: I broke my Slackware. I was chowning something for a user and, as I was really sleepy, accidentally entered "chown -R user /". It really didn't break, but it started to get glitchy because I couldn't fix it well enough. Then I rage-quit the game and wiped my whole drive except for my personal files. So now I'm here to learn how to properly install Slackware64 current out of the box and hear suggestions regarding partitioning schemes. First of all, I'm aware Alien Bob has a script to help automate the upgrading of the system. Is it the mirror-slackware-current.sh? Then what should I do? Install Slack and run the script or can I download things from another distro (I have Arch installed - love LXDE!) and use the Slack DVD to boot and choose it as the source?
If the suggested method is to install Slack first and go from there, I should upgrade slackpkg first, right? My other question is regarding partitioning schemes. I have an 160GB hdd and I used to follow this format: a small (200MB) primary /boot, a primary 20-30GB /, a primary 100GB (give or take) /home and the rest as an extended distro-hopping partition (at the moment I'm building LFS) plus swap. The thing is that I've been noticing a big inconvenience in this method. I have around 40GB left and sometimes I get curious about distro x or y and want to install it so I have to change the logical partitions and my swap gets renamed, which makes me have to edit my fstab. I already changed this setting sda1 to be swap. I'll be installing in a desktop personal computer. Some college work, but nothing too hardcore.
View 7 Replies
View Related
Mar 11, 2011
I bought a new NVidia Asus EN210 for my HTPC, but I can't get Ubuntu to install.
First I made a live USB disk of 10.10 with Unetbootin and when I choose the option of "try Ubuntu" it starts loading and then just hangs, still showing the menu of boot options. After this I tried Xubuntu on a USB disk. This one also starts loading but then just fails. I also tried XBMC Live. This one does show the Ubuntu 10.04 screen but then just shows a black screen.
After this I found a CD with Ubuntu 10.04, I think or it is 10.10, laying around in my room. I booted it and once I select an option from the install menu it starts to load, but then just gives a black screen with a flashing "-" sign.
The strange thing is, once I pop in the old video card, which is an ATI HD4350, my Ubuntu 10.10 Live CD on USB disk does work and it does get past the menu of boot options (in my second paragraph I describe how this isn't the case with Ubuntu 10.10 combined with my NVidia card).
View 3 Replies
View Related
Jul 14, 2010
I have Windows and Pclinuxos on my machine. I get the option of selecting either when I boot up. I now want to add Mandriva One, giving me three choices. I've created a new partition for Mandriva and the table now looks like this:
[Code]...
I have tried installing a third OS (Windows + 2 distros) in the past but still only got two choices - Windows and the last installed distro. The first distro was still in the machine but not showing on the boot up screen. I've tried to read up about chainloading but don't really understand it.
View 14 Replies
View Related
Feb 28, 2011
How can I know all the tools and app that comes with a distro, for example Debian 6 ?I can see that linux distros have a lot a small , medium apps (natives like cat, join, paste, etc; and 3rd party like iwconfig, etc=)So , how can I know what i have with a linux distro ?
View 4 Replies
View Related
Jul 21, 2010
It would be convenient if i could simply install 11.3 along side my Ubuntu distro. I see yast enables me to reduce my sda1 and create a new partition, (sda3) However it offers to mount sda3 in /usr ? Could you offer me any advice please? My objective is to be able to select which distro from the grub menu.
View 9 Replies
View Related
Oct 28, 2010
I would like a new linux distro. I've been using ubuntu for like 2 years or more and I'm just done with it. Some things that I want out of the new distro are:
Since I like learning, I want the distro to NOT be so user-friendly. I want a challenge. Just anything new to learn would be amazing. I need wireless support out of the box though, since that's the only source of internet I have around here.. I need it to be installable from usb, since i'm using a netbook without a cd drive.
View 12 Replies
View Related
May 9, 2010
I've had Ubuntu (8.10) on my netbook in the past and I really liked it. I'm currently running Fedora and feeling like I should "change it up" again. I've played around with Ubuntu 10.04 Lucid a little, and so far I'm very impressed. I've always wanted to try Arch, but I'm worried I won't have the driver support I need for all the non-standard hardware in a netbook.
Does anybody have a suggestion for a new distro to try? I'm preferably looking for something feature-rich over light-weight, and something that I can have up and running with a minimum of configuration (at least partially working).
View 3 Replies
View Related
Aug 7, 2010
I bought an Eee PC 1000, the Linux SSD model, a couple years ago. I ended up putting Easy Peasy (then called Ubuntu Eee) onto it, only to be dissatisfied with the speed. Then I put Windows XP on it, and with a LOT of tweaking it ran sort of okay. Now I pulled it out and dusted it off but I want it to run Linux.
It has the Intel Atom 1.6ghz processor and 2gb of RAM (I upgraded it) so there's no lack of power there, but the SSD is extremely slow; it has a small write buffer, but when you do anything slightly significant you can feel the system stutter every second or two as the SSD halts everything while it dumps its full cache to disk. I'm talking serious stutters, and the cache isn't very big; to get Firefox to not stutter I had to move all caching into RAM and disable history (even just writing the history log to disk froze the system with every webpage).
Anyway, I hope I've given you a decent idea of just how slow this SSD is. With that said, is there a Linux distro that is optimized for an extremely slow hard drive but decent powered system? I'm not looking for something underpowered because the processor and RAM are plenty powerful, I just want something that perhaps is optimized for not writing to disk often.
View 4 Replies
View Related
Feb 6, 2010
I didn't know where to post this, but I hope I get an answer. I'm not new to Linux, but I'm not a super user either. I've been distro hopping for years, until I found Mandriva 2010. I love it, but whenever I install the ATI drivers I get a Kwin has crashed error every time I start up. So I tried openSuse 11.2, it's a pleasant distro implements KDE well, but I got the same results with openSuse.
My question to you guys is, what current KDE distro has the best support for ATI cards? Or is there a way to get either KDE or openSuse working correctly? I've tried everything I found in other forums to no avail.
My specs:
XFX HD Radeon 4770
AMD Athlon II X4 625
2 GB of Ram
View 6 Replies
View Related
Apr 6, 2010
My question is, is it okay (for example) if i have an Ubuntu desktop and i will connect it to a Red Hat PC Server. Will it do? or should i have to have a same distro for both Desktop and Server.
View 3 Replies
View Related
Apr 9, 2010
I have used Linux since 2007. I have find chance to try Ubuntu, Debian, Suse, Arch.
Question is Which distro is best coded?
I believeall distros can have same functions and Many distros is good for me. I dont have any problem with any of above distos. So which is best according to their base code system
View 11 Replies
View Related
Apr 14, 2010
I am looking for a distro that have good quality -not quantity- documantation. that is, It should be right, clear and even newbie can apply them.
Which distro is suit for it?
View 3 Replies
View Related
