our linux server is very slow today and load average is more than 16 .I m new in linux request you to kindly help resolving the issue.Where can i find the log for the cause.PHP Code:
# lsb_release -a
LSB Version: :core-3.1-ia32:core-3.1-noarch:graphics-3.1-ia32:graphics-3.1-noarch
Distributor ID: OracleVMserver
[code]...
I am facing a problem that sendmail gets failed during startup and the server could not get forward after that server gets hanged.I triedr several times and finally i have to resetup the os.A few days back i also faced same problem with Squid gets failed after rebooting the server and the server cant get to login screens.How to get rid of this problem
View 7 Replies View RelatedI run F12. Since some days my laptop has become very sluggish. In Mozilla, switching between the tabs takes like seconds instead of fraction of a second. Also minimizing and mximizing windows takes long. Switching between the windows too takes long. Now I can't see the cursor while typing this post. I disabled some services that start at the boot time. I'm posting a list of services that are on in the runlevel 5 as that's the one I use.
View 5 Replies View RelatedLinux cj454lt 2.6.32-24-generic #38-Ubuntu SMP Mon Jul 5 09:22:14 UTC 2010 i686 GNU/LinuxI noticed in top java was at the top of the queue.The machine runs very slow and takes forever to load mozilla pages etc. NOTHINGse is actively running on the box. No application this is happening at login time. Just start Mozilla. So I killed the java process and it seems to get better. Nothing looks out of the ordinary on the box
View 2 Replies View RelatedI installed Ubuntu 10.04 as virtual machine and now there is slight problem When I turn on machine I see VM bios but then VM stops and cursor (underscore) starts blinking. I waits like this for 2 minutes and then proceeds normally. There might be VM bios seen again. Since here, no slowness is noticed. It shuts down really fast
I'm using VMware workstation 7.0 and VMplayer 3.0.1, hard disk type used is SCSI.
I am running Ubuntu 9.10 x64 on a relatively old laptop and I find Grub is taking about 20 seconds to initially load before booting the system. The laptop only has a single 120GB hard drive, and I chose the "use entire disk" option when installing, so I do not have any fancy partitioning scheme.When the system boots I get the "LOADING GRUB" text displayed and then shortly after it just shows the flashing cursor with no text, and stays there for about 20 seconds. After that it finally starts loading the system.All the searching I have done only turned up solutions relevant to people with multiple hard drives. This was not an issue on Grub 1.
View 1 Replies View RelatedIt takes 45min to transfer 10MB from my laptop to my replacement server. It takes 1minute to transfer the same 10MB from my laptop to the old server.
All connections are equal. Both servers are plugged to the same router.
Details: I have decided to migrate away from my Proliant 1600 to a slightly newer less complex piece of hardware.
Both machines are LAMP installs. Both are setup to be maintained headless 99% of the time and gnome is launched from the command line only when it is needed.
The older machine has more things running on it than the replacement. The replacement has nothing running that the older machine does not have.
Old box runs Ubuntu 6.06 but was fully updated a month ago. Replacement box runs Ubuntu 10.10 and was fully updated just last night.
smb.conf was the same on both boxes other than the share locations. Reading trying to fix it myself, I did put some known speedup lines into the new box's smb.conf, but it did not make a noticeable difference.
Hardware:
Old box,
Proliant 1600 = 1998 small server tech. (weighs 50lbs w/o drives)
single 500mhz xeon (upgradable to 2 600mhz, though they are hard to find reasonably priced)
1GB SDRAM with ECC
[Code].....
It does not matter what share/drive/partition I transfer to on either machine. The result is always the same.
On the newer computer CPU usage rarely goes over 50% and it has not had to go into swap at all yet.
Quote:
Originally Posted by mcnalu
Nepomuk/strigi slowed my machine to a crawl and used 1Gb of disk space so I turned it off. In my machine is the same thing. Turning it off is a right and wise solution?
I have a Compaq CQ40-616TU Laptop. I have installed fedora 11 64 bit more then 20 times and facing the same problems. The Problems are
1) After booting into the fedora it get hanged up and blue screen with the logo of fedora.
2) Some time it shows message that "Could not update /var/lib/gdm/.IC Eauthirity"
3) I have also updated through yum but still facing the same problem
4) I have also tried fedora 12 but during installation process it shows message that no suitable hardware found.
Is it possible, on a much older computer to hit a point at which any newer kernel just won't work, where a lesser one once did? (or for that matter the whole OS) - OS is F14. The reason I ask is that I've never had a problem w/ any, (kernel) until now. I'm running a PIII w/ 512M (max) - video is Matrox Graphics, Inc. MGA G400/G450 (rev 04)
In the process of trying to fix another problem, I allowed the updates. After, my machine became unstable & slow to respond (w/ drive wanting to run a LOT) I tried rebooting, thinking that it needed to clear some garbage I may have caused. That SEEMED to help but after a while it started again. Seeming to be intermittent, so I tried the older kernel & it all stopped (or so it seem, so far) Also, I removed the "offending" one & was wondering how to skip over it?
I used my fc13's "Virtual Machine Manager" to install a FC14 vm image from a new iso.After a week of 8 hour days I got fc14 installed, I think that the "minimal" install option was bad. Now it takes yum 15 minutes to get warmed up. and about an hour for 1 simple package.(It was going in the background while working on other stuff, causing the cpu fan to roar with the extra load)It would be easier to install Fedora on an abacus or perhaps water clock.
View 2 Replies View RelatedI'm trying to set up a fileserver on my 10.04 machine, and access the files from Windows 7 via wifi. I can see everything alright, but the transfer speed to Windows never gets higher than 70KBps. Both computers can access the web at 800+KBps. I've also checked with an OS X machine on the same network, which was also extremely slow, so I'm fairly sure that the problem is on the server's side.
View 2 Replies View RelatedI installed a slack 13.7 on an old laptop. KDE was set as default desktop. then I login and run startx and I saw KDE first screen display. after that I saw blank screen with a mouse on it. Then it stayed there and it seems try read some in my harddisk since the persistent harddisk light.
View 3 Replies View RelatedI did a 5.2 to 5.5 upgrade using the following path
yum clean all
yum update glibc*
yum update yum* rpm* python*
yum clean all
[Code]....
I have good experience in microsoft enviroment, now tiring to use linux, i tried Ubuntu 9.10, OpenSuse on different computers bur there is same big problem: Very slow download speed compared to microsoft.same file at same time downloaded by microsoft winxp toke incomparable short time. for example file 5.5MB attached to e-mail on Yahoo toke ~1minute to download on winxp computer,same file at same computer but with Ubuntu takes more thane 30minutes!
View 3 Replies View Relatedi have a Emu10k1 sound card in my system , i did a installation and after reboot it hanged
View 1 Replies View RelatedI am a new user for ubuntu, recently i have updated to 11.04 version last week. When i kept my desktop idle for long time, the system goes down and it didn't wake up at all. I didnt change in the setting for screen saver and power management still. It is system default.
I didnt face this problem when i use version 10. Only the new version i am facing this.
Any solution for this?
whenever i go to videos and click on a video, namoroka just freezes or hangs (it will become a little dark grayish in color). i will wait for some time for it to become normal but, no matter how long i wait, it is just like that. what is wrong with namoroka?
View 2 Replies View RelatedI tried installing Ubuntu 11.04 (64bit) on my Macbook Pro 5.5, but it hanged during installation and now I cannot get the CD out. It hangs whatever I do. I looked at link [URL] and thought it would be ok to install after doing the partitioning. Is my Mac lost?
View 5 Replies View RelatedI am using Pthread concept for developing my application Some times my system is getting hanged while the code is running and as soon as I am Pressing CTRL + C it is coming out of the code and system is going to the normal state. but several time only ^C is appearing in the terminal and system is not responding. do any one have the Solution what to do in that case.
View 3 Replies View Relatedit get hanged on NET:Registered protocol family 2
View 1 Replies View RelatedHow do you transfer files on a Linux machine with ftp,sftp and scp disabled onto a remote machine
View 2 Replies View RelatedI successfully installed the virtual box on my fedora 8 system, and also created a virtual machine with windows xp OS, it works nicely, I try to configure the serial port of my virtual machine and try to configure the path for the port "screen shot are attached" it gives me the error message also the "screen shot are attached" for your review.Is kind of mistake is going on during the path setting, and how to set the path for configuring the serial port of my virtual machine so that I can use the hyper terminal tool of windows.
View 4 Replies View RelatedI have some file tools on a mint machine that I would rather not install on my mac laptop. Mainly because of the vastness of apt-get and the low risk of installation failure. Anyway, every so often I have a file that I want to process in place using some remote tool. Both machines can ssh right in to each other so I was figuring there must be some script or tool out there that would allow me to type out something like remote [file] [tool & args] to send my file to the other machine, get it processed, then get it back.
View 4 Replies View RelatedI'm know very little about Linux but decided to set up a machine running Drupal CMS on a Debian machine and it won't go. The folks at Drupal have tried to help but it seems the Debian OS won't do it's PHP thing for Drupal.
That means i'll have to start at the START I guess.
how to become a master of Linux if one is starting from ABC (I can add and subtract, that's what it feels like)
I was updating grub and for some reason the system hanged. Going to a tty did not solve any problems. At the end I had to do a hard reboot and came up with the following on the grub boot
reloc offset is out of segment Entering rescue mode grub rescue >
Googling for the above I landed on this page.
[URL]
While I'm going to try the later part, is there anything else I need to know about ?
Didn't have to do much, took the the Squeeze 6.10.a DVD, asked it to run into rescue mode and then did grub-install giving the MBR (hd0) as the place to be. Things worked nice after that.
Upon booting had to run
dpkg --configure -a
and it updated grub to 1.99-5 among other updates. Did not know that Squeeze had a rescue method as well (just like Ubuntu live CDs have). Now just have to wait for Debian to get Live CD/DVD as default
When i join my ubuntu 11.04 Desktop into video conference (about 30 minutes), it hanged and could not carry out any operation, keyboard hanged too
View 3 Replies View RelatedI downloading fedora 15 X64, when i want installing fedora in detecting hardware process, it is hanged! and not loaded but i easy install fedora 14. When some of process in fedora 15 loaded and show me please wait for detect hardware it is not work and like hanged.
View 5 Replies View RelatedI'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View RelatedI installed VLC player in our Open SUSE 11.2. Installation was successful. After installation i can't able to open the VLC player as well as Dolphin. Within few mins Everything got hanged. I Just restarted my system. Everything Gone. I am not getting Suse GUI. I gone through the log in console. It shows "Qt Incompatible library cannot execute the xwindows "
View 9 Replies View Related